Skip to main content
Log in

Preparation and Characterization of Pb(Zr, Ti)O3 Thin Films by Metalorganic Chemical vapor Deposition Using a Solid Delivery System

  • Articles
  • Published:
Journal of Materials Research Aims and scope Submit manuscript

Abstract

Pb(Zr, Ti)O3 (PZT) thin films were deposited on Pt/SiO2/Si substrates by metalorganic chemical vapor deposition using solid delivery system. The effects of deposition parameters such as the substrate temperature, the concentration of Pb precursor in the precursor mixtures, and the reactor pressure on the structural and electrical properties of PZT thin films were investigated. To obtain single-phase PZT thin films, the optimal range of the substrate temperature should be between 600 and 650 °C. The PbO content in PZT thin films was proportional to the fraction of Pb in the precursor mixture below 550 °C, but it was independent of the fraction of Pb in the mixture above 600 °C. With the increment of the reactor pressure, Zr contents in PZT thin films were increased, and the Pb/(Zr + Ti) ratio became more stoichiometric so that the ferroelectric properties were improved.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. C.A. Paz de Araujo, J.D. Cuchiaro, L.D. McMillan, M.C. Scott, and J.F. Scott, Nature (London) 374, 627 (1995).

    Article  Google Scholar 

  2. G. Yi, Z. Wu, and M. Sayer, J. Appl. Phys. 64, 2717 (1988).

    Article  CAS  Google Scholar 

  3. H. Adachi, T. Mitsuyu, O. Yamazaki, and K. Wasa, J. Appl. Phys. 60, 736 (1986).

    Article  CAS  Google Scholar 

  4. W. Jo, H-J. Cho, T.W. Noh, B.I. Kim, D-Y. Kim, Z.G. Khim, and S-I. Kwum, Appl. Phys. Lett. 63, 2198 (1993).

    Article  CAS  Google Scholar 

  5. C.S. Hwang and H.J. Kim, J. Am. Ceram. Soc. 78, 337 (1995).

    Article  CAS  Google Scholar 

  6. J.C. Shin, S-K. Hong, J.M. Lee, H.J. Cho, K.S. Kim, C.S. Hwang, and H. Kim, J. Korean Phys. Soc. 32, S1529 (1998).

    CAS  Google Scholar 

  7. J.C. Shin, J.M. Lee, S-K. Hong, H.J. Cho, K.S. Kim, C.S. Hwang, and H.J. Kim, J. Vac. Sci. Technol. A 16, 2591 (1998).

    Article  CAS  Google Scholar 

  8. A.J. Moulson and J.M. Herbert, Electroceramics (Chapman and Hall, London, United Kingdom, 1990), p. 283.

    Google Scholar 

  9. M. de Keijser and G.J.M. Dormans, MRS Bull. 21(6), 37 (1996).

    Article  Google Scholar 

  10. D. Kim, T.Y. Kim, J.K. Lee, W. Tao, and S.B. Desu, in Ferroelectric Thin Films V, edited by S.B. Desu, R. Ramesh, B.A. Tuttle, R.E. Jones, and I.K. Yoo (Mater. Res. Soc. Symp. Proc. 433, Pittsburgh, PA, 1996), p. 213.

  11. A.C. Jones and T.J. Leedham, Chem. Vap. Deposition 4, 2 (1998).

    Article  Google Scholar 

  12. C.S. Hwang, J.C. Shin, J.B. Lee, J.H. Park, Y.J. Cho, H.J. Kim, S.Y. Lee, and S.O. Park, J. Mater. Res. 14, 2053 (1999).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Hong, E., Shin, J.C., Choi, J. et al. Preparation and Characterization of Pb(Zr, Ti)O3 Thin Films by Metalorganic Chemical vapor Deposition Using a Solid Delivery System. Journal of Materials Research 15, 1284–1290 (2000). https://doi.org/10.1557/JMR.2000.0187

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1557/JMR.2000.0187

Navigation