Abstract
ZrC films with high hardness were deposited on A3 steel by ion-beam-assisted deposition and had a corrosion rate more than two orders less and a corrosion potential 0.19 V greater than those of the bare A3 steel. The corrosion current of ZrC films was 10 times less and the polarization resistance at least 7.82 times higher than those of both Teflon and ZrN films, respectively. The experimental results confirmed that ZrC films notably enhanced the corrosion resistance of steels.
Similar content being viewed by others
References
W. A. Mackie, T. B. Xie, and P. R. Davis, J. Vac. Sci. Technol. B 13 (6), 2459 (1995).
K. Edamoto, T. Anazawa, S. Tokumitsu, A. Tanabe, R. Sekine, E. Miyazaki, H. Kato, and S. Otani, Solid State Commun. 97 (5), 435 (1996).
T. C. Tessner and P.R. Davis, J. Vac. Sci. Technol. A 11 (1), 1 (1993).
J. Brückner and T. Mäntylä, Surf. Coat. Technol. 59, 166 (1993).
D. C. Smith, R. R. Rubiano, M. D. Healy, and R. W. Springer, in Chemical Perspectives of Microelectronic Materials III, edited by C. R. Abernathy, C. W. Bates, D. A. Bohling, and W. S. Hobson (Mater. Res. Soc. Symp. Proc. 282, Pittsburgh, PA, 1993), p. 643.
D. J. Varacalle, Jr., L. B. Lundberg, H. Herman, G. Bancke, and W. L. Riggs II, Surf. Coat. Technol. 68/69, 86 (1994).
X-M. He, L. Shu, H-B. Li, H-D. Li, and S-T. Lee, J. Vac. Sci. Technol. A 16 (4), 2337 (1998).
L.D. Wang, HB. Li, J.L. He, X.M. He, W.Z. Li, Y.H. Wang, and H.D. Li, Mater. Lett. 33 (1–2), 77 (1997).
J.H. He, X.D. Bai, C.L. Ma, and H.M. Chen, Nucl. Instrum. Methods B100 (1), 59 (1995).
D. A. Jones, Principles and Prevention of Corrosion (Macmillan, New York, 1992), p. 75, 365.
R. S. Lillard, D. P. Butt, T. N. Taylor, K. C. Walter, and M. Nastasi, Corrosion Sci. 39 (9), 1605 (1997).
M. K. Lei and Z.L. Zhang, J. Vac. Sci. Technol. A 15 (2), 421 (1997).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
He, XM., Shu, L., Li, HB. et al. High corrosion resistant ZrC films synthesized by ion-beamassisted deposition. Journal of Materials Research 14, 615–618 (1999). https://doi.org/10.1557/JMR.1999.0087
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1999.0087