Abstract
The ability to process large grain, uniform high temperature superconducting ceramics that exhibit high critical current densities at 77 K is essential if the enormous potential of these materials for a range of permanent magnet-type applications is to be realized. We report a study of the fabrication of large grain YBa2Cu3O7−δ by seeded peritectic solidification in which key processing parameters such as the peritectic melting process, the seed-YBCO reaction, and the YBCO solidification kinetics are investigated in detail. Evolution of the sample microstructure during various stages of the growth process, in particular, has been studied extensively. The superconducting properties of specimens cut from different regions of large grain samples have been measured using vibrating sample magnetometry, and the results correlated with the microstructure of the materials.
Similar content being viewed by others
References
H. Fukuyama, K. Seki, T. Takizawa, S. Endou, M. Murakami, H. Takaichi, and N. Koshizuka in Advances in Superconductivity V, Proc. 5th Int. Symp. Supercond., edited by Y. Bando and H. Yamauchi (Springer-Verlag, Tokyo, Japan, 1993), p. 1313.
R. Takahata, H. Ueyama, and A. Kubo, in Advances in Superconductivity V, Proc. 5th Int. Symp. Supercond., edited by Y. Bando and H. Yamauchi (Springer-Verlag, Tokyo, Japan, 1993), p. 1309.
F. C. Moon and P. Z. Chang, Appl. Phys. Lett. 56, 22 (1990).
R. Decher, P. N. Peters, R. C. Sisk, E. W. Urban, M. Vlasse, and D. K. Rao, Appl. Supercond. 1, 1265 (1993).
F. C. Moon, P. Z. Chang, H. Hojaji, A. Barkatt, and A. N. Thorpe, Jpn. J. Appl. Phys. 29, 1257 (1990).
W. K. Chu, K. B. Ma, C. K. McMichael, and M. A. Lamb, Appl. Supercond. 1, 1259 (1993).
T. S. Luhman, M. Strasik, A. C. Day, D. F. Garrigus, T. D. Martin, K. E. McCrary, and H. G. Ahlstrom, in Applied Superconductivity 1995, Proc. 2nd European Applied Superconductivity, Inst. Phys. Conf. Ser. No. 148, edited by D. Dew-Hughes (Institute of Physics Publishing, Bristol, UK, 1995), Vol. 1, p. 35.
M. Murakami, Appl. Supercond. 1, 1157 (1993).
K. Kishio, J. Shimoyama, T. Hasegawa, and K. Kitazawa, Jpn. J. Appl. Phys. 26, L1228 (1987).
W. Lo, D.A. Cardwell, S-L. Dung, and R.G. Barter, J. Mater. Sci. 30, 3995 (1995).
D. F. Lee, V. Selvamanikam, and K. Salama, Physica C 165, 480 (1990).
M. Murakami, S. Kotoh, N. Koshizuka, S. Tanaka, T. Matsushita, S. Kambe, and K. Kitazawa, Cryogenics 30, 390 (1990).
S. Sengupta, D. Shi, Z. Wang, C. Biondo, U. Balachadran, and K. C. Goretta, Physica C 199, 43 (1992).
T. Izumi, Y. Nakamura, and Y. Shiohara, J. Mater. Res. 8, 1240 (1993).
M. L. Griffith, R. T. Huffman, and J. W. Halloran, J. Mater. Res. 9, 1633 (1994).
W. Lo, D. A. Cardwell, S-L. Dung, and R. G. Barter, IEEE Trans. Appl. Supercond. 5, 1619 (1995).
W. Lo, D. A. Cardwell, S.-L. Dung, and R. G. Barter, J. Mater. Res. 11, 39–49 (1996).
W. Lo, D. A. Cardwell, P. D. Hunneyball and S-L. Dung, unpublished.
D. A. Cardwell, W. Lo, H. D. E. Thorpe, and A. Roberts, J. Mater. Sci. Lett. 14, 1444 (1995).
S-L. Dung, M. Phil. Thesis, University of Cambridge (1995).
Y. Shiohara, presented at MRS Spring Meeting, 17–21 April 1995, San Francisco, California.
S. Honjo, M. J. Cima, M. C. Flemings, J. S. Haggerty, T. H. Sing, H. Shen, and K. Ribgy, presented at MRS Spring Meeting, 17–21 April 1995, San Francisco, California.
C-J. Kim, K-B. Kim, G-W. Hong, and H-Y. Lee, J. Mater. Res. 10, 1605 (1995).
C. Varanaci and P. J. McGinn, Physica C 207, 79 (1993).
C. P. Bean, Mod. Phys. 36, 31–39 (1964).
V. Chakrapani, D. Balkin, and P. McGinn, Appl. Supercond. 1, 71 (1993).
M. Lepropre, I. Mont, M. P. Delamare, M. Hervieu, Ch. Simon, J. Provost, G. Desgardin, B. Raveau, J. M. Barbut, D. Bourgault, and D. Braithwaite, Cryogenics 34, 63 (1994).
D. N. Matthess, J. W. Cochrane, and G. J. Russell, Physica C 249, 255 (1995).
C. D. Dewhurst, D. A. Cardwell, and N. McN. Alford, J. Appl. Phys. 77, 2067 (1995).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lo, W., Cardwell, D.A., Dewhurst, C.D. et al. Fabrication of large grain YBCO by seeded peritectic solidification. Journal of Materials Research 11, 786–794 (1996). https://doi.org/10.1557/JMR.1996.0095
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1996.0095