Abstract
The effects of loading and unloading rate on fracture features formed during sharp indentation of polycrystalline Al2O3 have been studied. It was found that there is a transition between intergranular and transgranular fracture if the loading rate is increased by a factor of 104 during the whole indentation cycle. By varying the loading or unloading rate during indentation, and correlating the corresponding dependence of fracture features, the part of the indentation cycle can be identified in which specific segments of cracks are generated. Hence, the fracture sequence during indentation is established. The fracture sequence for polycrystalline Al2O3 is compared with those reported from direct observation in optically transparent materials such as soda-lime glass and various single crystal ceramics.
Similar content being viewed by others
References
B. Lawn and R. Wilshaw, J. Mater. Sci. 10, 1049 (1975).
B. R. Lawn and D. B. Marshall, Fracture Mechanics of Ceramics, Vol. 3, Flaws and Testing, edited by R. C. Bradt, D. P. H. Hasselman, and F. F. Lange (Plenum Press, New York, 1978), p. 205.
B. R. Lawn, B. J. Hockey, and H. Richter, J. Microscopy 130 (Pt 3), 295 (1983).
K. Breder, K. Zeng, and D. J. Rowcliffe, Ceram. Eng. Sci. Proc. 10, 1005 (1989).
D.J. Rowcliffe, in Erosion of Ceramic Materials, edited by J. E. Ritter (Trans. Tech. Pub., Bay Village, OH, 1991), p. 1.
D. B. Marshall, T. Noma, and A. G. Evans, J. Am. Ceram. Soc. 65, C-175 (1982).
K. Zeng, K. Breder, D.J. Rowcliffe, and C. Herrstrom, J. Mater. Sci. 27, 3789 (1992).
G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall, J. Am. Ceram. Soc. 64, 533 (1981).
P. Chantikul, G.R. Anstis, B.R. Lawn, and D.B. Marshall, J. Am. Ceram. Soc. 64, 539 (1981).
B. R. Lawn and E. R. Fuller, J. Mater. Sci. 10, 2016 (1975).
B.R. Lawn and A.G. Evans, J. Mater. Sci. 12, 2195 (1977).
J.T. Hagan, J. Mater. Sci. 14, 2975 (1979).
S. Lathabai, J. Rodel, T. Dabbs, and B.R. Lawn, J. Mater. Sci. 26, 2157 (1991).
S. Lathabai, J. Rodel, T. Dabbs, and B. R. Lawn, J. Mater. Sci. 26, 2313 (1991).
T.A. Laursen and J.C. Simo, J. Mater. Res. 7, 618 (1992).
J.T. Hagan and M.V. Swain, J. Phys. D: Appl. Phys. 11, 2091 (1978).
B. R. Lawn, A. G. Evans, and D. B. Marshall, J. Am. Ceram. Soc. 63, 574 (1980).
D. B. Marshall, B. R. Lawn, and A. G. Evans, J. Am. Ceram. Soc. 65, 561 (1982).
R.F. Cook and D.H. Roach, J. Mater. Res. 1, 589 (1986).
R.F. Cook and G.M. Pharr, J. Am. Ceram. Soc. 73, 787 (1990).
R. Tandon, D.J. Green, and R.F. Cook, J. Am. Ceram. Soc. 73, 2619 (1990).
S.M. Smith and R.O. Scattergood, J. Am. Ceram. Soc. 75, 305 (1992).
R.F. Cook and E.G. Liniger, J. Mater. Sci. 27, 4751 (1992).
R. W. Rice, in Treatise on Materials Science and Technology, edited by R. K. MacCrone (Academic Press, New York, 1977), Vol. 11, p. 199.
R.W. Rice, in Fractography of Ceramic and Metal Failure, edited by J. J. Mecholsky, Jr. and S. R. Powell, Jr. (Am. Soc. Test Mater., Spe. Tech. Publ., 827, ASTM, 1984), p. 5.
P.L. Swanson, C.J. Fairbanks, B.R. Lawn, Y-W. Mai, and B.J. Hockey, J. Am. Ceram. Soc. 70, 279 (1987).
P. Chantikul, S. J. Bennison, and B. R. Lawn, J. Am. Ceram. Soc. 73, 2419 (1990).
L. M. Braun, S. J. Bennison, and B. R. Lawn, J. Am. Ceram. Soc. 75, 3049 (1992).
R.F. Cook, Acta metall. mater. 38, 1083 (1990).
R. F. Cook and A. G. Schrott, J. Am. Ceram. Soc. 71, 50 (1988).
R.F. Cook, M.R. Pascucci, and W.H. Rhodes, J. Am. Ceram. Soc. 73, 1873 (1990).
J. J. Mecholsky, J. Am. Ceram. Soc. 64, 563 (1981).
J. J. Mecholsky and S. W. Freiman, in Fractography and Materials Science, edited by L. N. Gilbertson and R. D. Zipp (Am. Soc. Test Mater., Spe. Tech. Publ., 733, ASTM, 1981), p. 246.
K.R. McKinney, J.J. Mecholsky, Jr., and S.W. Freiman, J. Am. Ceram. Soc. 62, 336 (1979).
K. Zeng, K. Breder, and D.J. Rowcliffe, Ceram. Eng. Sci. Proc. 12, 2233 (1991).
K. Zeng, K. Breder, and D. J. Rowcliffe, J. Am. Ceram. Soc. 76, 1673 (1993).
A. H. Heuer, J. Am. Ceram. Soc. 52, 510 (1969).
R. F. Cook, B. R. Lawn, and C. J. Fairbanks, J. Am. Ceram. Soc. 68, 604 (1985).
H.P. Kirchner and T.J. Larchuk, J. Am. Ceram. Soc. 65, 506 (1982).
D. B. Marshall, A. G. Evans, and Z. Nisenholz, J. Am. Ceram. Soc. 66, 580 (1983).
E. H. Yoffe, Philos. Mag. A 46, 617 (1982).
A. E. Giannakopoulos, P-L. Larsson, and R. Vestergaard, Int. J. Solids and Structures (1994, in press).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zeng, K., Rowcliffe, D. Identification of fracture sequences during sharp indentation of polycrystalline Al2O3. Journal of Materials Research 9, 1693–1700 (1994). https://doi.org/10.1557/JMR.1994.1693
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1994.1693