Abstract
A thick as-grown diamond film was examined directly by conventional transmission electron microscopy (TEM) without thinning, and the important microstructures near the growth surface were characterized. Specimen preparation for TEM involved simply fracturing the film; some of the diamond grains located on the specimen edge were thin enough to be directly examined by TEM. The 3-D topography of the diamond grains located at the intersection of the growth and the fracture surfaces was obtained using secondary electron images, so that the 2-D projected grain geometry could be derived easily to help interpret the TEM images. A diamond film grown with a 〈001〉 texture and having grains 2–3 μm diameter with {001} facets parallel to the substrate and four inclined {111} facets was examined. Grains with fracture surfaces that intersected the top (001) facet, grains with fractures that intersected only {111} facets, and unfractured grains were studied. It was found that the core volume bounded by the (001) top facet and its projected column defined by orthogonal internal {110} were free from microtwins, but contained a few dislocations. The remaining volume around this core, bounded by {111} facets (or grain boundaries) and the internal {110}, was filled with microtwins. The microtwins were not merely at the {111} surfaces. Our results reveal a growth mechanism in which microtwins are formed as material is added to {111} but not {001}. The formation of microtwins in CVD diamond is thus clearly associated with growth on {111} surface facets.
Similar content being viewed by others
References
G-H.M. Ma, Y. H. Lee, and J.T. Glass, J. Mater. Res. 5, 2367 (1990).
R.E. Clausing, L. Heatherly, and K. L. More, Surf. Coating Technol. 39/40, 199 (1990).
B.E. Williams and J.T. Glass, J. Mater. Res. 4, 373 (1989).
J. Narayan, J. Mater. Res. 5, 2414 (1990).
Z.L. Wang, J. Bentley, R.E. Clausing, L. Heatherly, and L.L. Horton, in Applications of Diamond Films and Related Materials, edited by Y. Tzeng, M. Yoshikawa, M. Murakawa, and A. Feldman (Elsevier, Amsterdam, 1991), p. 489.
J. C. Angus and C. Hayman, Science 241, 913 (1988).
R.E. Clausing, L. Heatherly, E.D. Specht, and K.L. More, in New Diamond Science and Technology, edited by R. Messier, J. T. Glass, J. E. Butler, and R. Roy (Mater. Res. Soc. Symp. Int. Proc. NDST-2, Pittsburgh, PA, 1991), p. 575.
Z.L. Wang, R.E. Clausing, L. Heatherly, and L.L. Horton, unpublished.
W. Zhu, A.R. Badzian, and R. Messier, J. Mater. Res. 4, 659 (1989).
J.L. Kaae, P.K. Gantzel, J. Chin, and W.P. West, J. Mater. Res. 5, 1480 (1990).
A.V. Hetherington, C.J.H. Wort, and P. Southworth, J. Mater. Res. 5, 1591 (1990).
A. R. Badzian, T. Badzian, X. H. Wang, and T. Hartnett, in New Diamond Science and Technology, edited by R. Messier, J.T. Glass, J. E. Butler, and R. Roy (Mater. Res. Soc. Symp. Int. Proc. NDST-2, Pittsburgh, PA, 1991) p. 549.
S. Stuart, S. Prawer, A. Hoffman, and A. Moodie, in Evolution of Thin Film and Surface Microstructure, edited by C. V. Thompson, J. Y. Tsao, and D. J. Srolovitz (Mater. Res. Soc. Symp. Proc. 202, Pittsburgh, PA, 1991), p. 217.
D. Meakin, J. Stoemenos, P. Migliorato, and N.A. Economou, J. Appl. Phys. 61, 5031 (1987).
A. Van der Drift, Philips Res. Rep. 22, 267 (1967).
Ch. Wild, N. Herres, and P. Koidl, J. Appl. Phys. 68, 973 (1990).
Z.L. Wang, L.L. Horton, R.E. Clausing, L. Heatherly, and J. Bentley, Proc. 50th Annual Meeting of Electron Microscopy Soc. America (Boston), edited by G. W. Bailey, J. Bentley, and J. A. Small (San Francisco Press, San Francisco, CA, 1992), p. 336.
Z.L. Wang, J. Bentley, R.E. Clausing, L. Heatherly, and L.L. Horton, Proc. 51st Annual Meeting of Microscopy Society of America (Boston), edited by G. W. Bailey and E. L. Rieder (San Francisco Press, San Francisco, CA, 1993), p. 1006.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wang, Z.L., Bentley, J., Clausing, R.E. et al. Direct correlation of microtwin distribution with growth face morphology of CVD diamond films by a novel TEM technique. Journal of Materials Research 9, 1552–1561 (1994). https://doi.org/10.1557/JMR.1994.1552
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1994.1552