Abstract
We discuss the results obtained for SrTiO3/YBa2Cu3O7 layers deposited on (001) MgO substrates by UV pulsed laser ablation. Different samples were prepared to study both the growth of a thin (55 nm) layer of SrTiO3 on MgO and the successive epitaxy of a 220 nm YBa2Cu3O7 (YBCO) film on the SrTiO3 layer. An x-ray diffraction (XRD) texture analysis is reported for the bilayers together with resistivity versus temperature and critical current density (Jc) measurements of the superconducting films. The results show that YBCO grains grow with c-axis normal to the surface; the main in-plane orientations are [100] MgO // [100] SrTiO3 // [100] YBCO ([010] YBCO). The XRD line broadening analysis suggests that YBCO columnar grains grow along the whole thickness of the film, also evidencing dislocations and/or faulting separated by a mean distance of 80 nm. The values obtained for the critical current of the superconductor demonstrate the effectiveness of the SrTiO3 intermediate layer in improving the structural quality of the YBCO film.
Similar content being viewed by others
References
S.S. Laderman, R.C. Taber, R.D. Jacowitz, J.L. Moll, C.B. Eom, T.L. Hylton, A. F. Marshall, T. H. Geballe, and M.R. Beasley, Phys. Rev. B 43, 2922 (1991).
L.S. Gergis, J.T. Cheung, T.N. Trinh, E.A. Sovero, and P.H. Kobrin, Appl. Phys. Lett. 60, 2026 (1992).
B. F. Cole, G-C. Liang, N. Newman, K. Char, G. Zaharchuk, and J. S. Martens, Appl. Phys. Lett. 61, 1727 (1992).
E.A. Giess, R.L. Sandstrom, W.I. Gallagher, A. Gupta, S.L. Shinde, R.F. Cook, E.I. Cooper, E.J.M. O’Sullivan, J.M. Roldan, A. P. Segmüller, and J. Angilello, I.B.M. J. Res. Develop. 34, 916 (1990).
K. Char, N. Newman, S. M. Garrison, R. W. Barton, R. C. Taber, S.S. Laderman, and R.D. Jancowitz, Appl. Phys. Lett. 57, 409 (1990).
H. Schmidt, K. Hradil, W. Hösier, W. Wersing, G. Gieres, and R. J. Seeböck, Appl. Phys. Lett. 59, 222 (1991).
B.H. Moeckly, S.E. Russek, D.K. Lathrop, Jan Li, and J.W. Mayer, Appl. Phys. Lett. 57, 1687 (1990).
A. Lamagna, S. Nicoletti, M. Sánchez Balmaseda, A. Migliori, R. Fabbri, and L. Correra, Supercond. Sci. Technol. 5, 117 (1992).
J.T. Cheung, I. Gergis, M. James, and R.E. DeWames, Appl. Phys. Lett. 60, 3180 (1992).
M. Bianconi, G. Bobbio, L. Correra, A. Lamagna, S. Nicoletti, M. Sánchez Balmaseda, and W. Soncini, Mater. Sci. Eng. B 13, 21 (1992).
P. Scardi, L. Lutterotti, and P. Maistrelli, in Accuracy in Powder Diffraction II, edited by E. Prince and J. K. Stalick (NIST Special Publication 846, Gaithersburg, MD), p. 216.
Powder Diffraction File, Swarthmore, PA, International Centre for Diffraction Data (1988).
B.E. Warren and B.L. Averbach. J. Appl. Phys. 21, 595–599 (1950).
H. P. Klug and L. E. Alexander, X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd éd. (J. Wiley and Sons, New York, 1974), p. 650.
P. Scardi, L. Lutterotti, and R. Di Maggio, Powder Diffraction 6, 20–25 (1991).
A. Benedetti, G. Fagherazzi, S. Enzo, and M. Battagliarin, J. Appl. Crystallogr. 21, 543–549 (1988).
P. Scardi, D. C. Kothari, and L. Guzman, Thin Solid Films 195, 213–233 (1991).
B. E. Warren, X-ray Diffraction (Dover, New York, 1990), p. 291.
R.L. Rothman and J.B. Cohen, J. Appl. Phys. 42, 971–979 (1971).
R. K. Nandi, H. K. Kuo, W. Schlosberg, G. Wissler, J. B. Cohen, and B. Crist, Jr., J. Appl. Crystallogr. 17, 22–26 (1984).
P. Scardi, L. Lutterotti, and R. Di Maggio, in Advances in X-ray Analysis, edited by C.S. Barrett, J.V. Gilfrich, T.C. Huang, R. Jenkins, G.J. McCarthy, P.K. Predecki, R. Ryon, and D.K. Smith (Plenum Press, New York, 1992), Vol. 35A, pp. 69–76.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Scardi, P., Lutterotti, L., Correra, L. et al. Characterization of epitaxial SrTiO3/YBa2Cu3O7 layers deposited on (001) MgO by laser ablation. Journal of Materials Research 8, 2780–2784 (1993). https://doi.org/10.1557/JMR.1993.2780
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1993.2780