Abstract
The effects of substituting Cu for either Ti or Al in Al3Ti were studied by the first-principles local density self-consistent linear muffin tin orbital method. The Cu atoms are found to strongly favor Al sites and to promote the stability of the L12 phase, in agreement with experiment. Surprisingly, the rigid band model is closely followed when Cu substitutes for Al. However, the structure of the density of states undergoes remarkable changes if Cu substitutes for Ti; a much weaker hybridization occurs in both L12- and DO22-like structures, giving rise to weaker binding effects. The modification of bond directionality upon Cu addition is determined by comparing the charge density for the structures calculated with those of pure Al3Ti. The effect of tetragonal distortion is also examined. By comparing with the bonding characteristics of pure Al3Ti in the L12 and DO22 structures, the addition of Cu to Al3Ti is found to be equivalent to the tetragonal distortion in DO22 Al3Ti as far as bonding is concerned, resulting in the stabilized L12-like structure for (AlCu)3Ti. The semi-empirical inverse relation between the structural stability and the density of states at Fermi energy is well established.
Similar content being viewed by others
References
N. S. Stoloff, in Superalloys II (John Wiley & Sons, New York, 1987).
S. M. Sastry and H.A. Lipsitt, Metall. Trans. 8A, 1543 (1977).
H. A. Lipsitt, D. Shechtmann, and R. E. Schafrik, Metall. Trans. 11A, 1369 (1980).
M. Yamaguchi, Y. Umakoshi, and T. Yamane, Philos. Mag. A55, 301 (1987).
D.M. Nicholson, G.M. Stocks, W.M. Temmerman, P. Sterne, and D. G. Pettifor, in High Temperature Ordered Intermetallic Alloys III, edited by CT. Liu, A.I. Taub, N.S. Stoloff, and C.C. Koch (Mater. Res. Soc. Symp. Proc. 133, Pittsburgh, PA, 1989), p. 17.
A. E. Carlsson and P. J. Meschter, J. Mater. Res. 4, 1060 (1989).
T. Hong, T. J. Watson-Yang, A. J. Freeman, T. Oguchi, and J-h. Xu, Phys. Rev. B41, 12462 (1990).
C.T. Liu, Int. Met. Rev. 29, 168 (1984).
A. Raman and K. Schubert, Z. Metallkd. 56, 99 (1965).
P. Virdis and V. Zwicker, Z. Metallkd. 62, 46 (1971).
S. Mazdiyasni, D. B. Miracle, D. M. Dimiduk, M. G. Mendiratta, and P. R. Subramanian, Scripta Metall. 23, 327 (1989).
V. Ya Markiv, V.V. Burnashova, and V. R. Ryabov, Akad. Nauk. Ukv. SSR Metall. 46, 103 (1973).
J. Tarnacki and Y-W. Kim, Scripta Metall. 22, 329 (1988).
A. J. Maeland and D. Narimhan, in High Temperature Ordered Intermetallic Alloys III, edited by C.T. Liu, A.I. Taub, N.S. Stoloff, and C.C. Koch (Mater. Res. Soc. Symp. Proc. 133, Pittsburgh, PA, 1989), p. 723.
S. C. Huang, E. L. Hall, and M. F. X. Gigliotti, J. Mater. Res. 3, 1 (1988).
P. G. Nash, Bull. Alloy Phase Diagr. 3, 367 (1982).
V. K. Vasudevan, R. Wheeler, and H. L. Fraser, in High Temperature Ordered Intermetallic Alloys III, edited by C.T. Liu, A. I. Taub, N. S. Stoloff, and C. C. Koch (Mater. Res. Soc. Symp. Proc. 133, Pittsburgh, PA, 1989), p. 705.
A. Seibold, Z. Metallkd. 72, 712 (1981).
E. P. George, W. D. Porter, H. M. Henson, W. C. Oliver, and B. F. Oliver, J. Mater. Res. 4, 78 (1989).
E. P. George, W. D. Porter, and D. C Joy, in High Temperature Ordered Intermetallic Alloys III, edited by C.T. Liu, A.I. Taub, N. S. Stoloff, and C. C. Koch (Mater. Res. Soc. Symp. Proc. 133, Pittsburgh, PA, 1989), p. 311.
K. S. Kumar and J. R. Pickens, in Dispersions Strengthened Aluminum Alloys, edited by Y-W. Kim and W. M. Griffith (TMS, Warrendale, PA, 1988).
W. D. Porter, K. Hisatsune, C. J. Sparks, W. C. Oliver, and A. Dhere, in High Temperature Ordered Intermetallic Alloys III, edited by C.T. Liu, A. I. Taub, N. S. Stoloff, and C. C. Koch (Mater. Res. Soc. Symp. Proc. 133, Pittsburgh, PA, 1989), p. 657.
A. Raman and K. Schubert, Z. Metallkd. 56, 40 (1965).
P. R. Subramanian, J. P. Simmons, M. G. Mendiratta, and D. M. Dimiduk, in High Temperature Ordered Intermetallic Alloys III, edited by C.T. Liu, A. I. Taub, N. S. Stoloff, and C. C. Koch (Mater. Res. Soc. Symp. Proc. 133, Pittsburgh, PA, 1989), p. 51.
C.L. Fu, J. Mater. Res. 5, 971 (1990).
O. K. Andersen, Phys. Rev. B12, 3060 (1975).
P. Hohenberg and W. Kohn, Phys. Rev. B136, 864 (1964).
W. Kohn and L. J. Sham. Phys. Rev. A 140, 1133 (1965).
T. Hong, T. J. Watson-Yang, X-Q. Guo, A. J. Freeman, J-H. Xu, and T. Oguchi (to be published).
P. Villars and L. D. Calvert, Pearson’s Handbook of Crystallo-graphic Data for Intermetallic Phases (American Society for Metals, Metal Park, OH, 1985).
N. E. Christensen, Phys. Rev. B29, 5547 (1984).
W. Lin and A. J. Freeman (to be published).
G. Lehman and M. Taut, Phys. Status Solidi (b)54, 469 (1972).
J-H. Xu, T. Oguchi, and A. J. Freeman, Phys. Rev. B36, 4186 (1987).
J. Tardy and K. N. Tu, Phys. Rev. B32, 2070 (1985).
X-Q. Guo, R. Poudloucky, and A. J. Freeman, Phys. Rev. B40, 2793 (1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hong, T., Freeman, A.J. Effect of ternary additions on the structural stability and electronic structure of intermetallic compounds: Al3Ti + Cu. Journal of Materials Research 6, 330–338 (1991). https://doi.org/10.1557/JMR.1991.0330
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1991.0330