Abstract
A varistor’s life has been defined as the time required to reach a limiting power density at which the power generated exceeds the power dissipated. Based on this concept, a working model for predicting the life of a ZnO varistor has been developed in terms of several critical material and design parameters. The model provides a direction as to whether these parameters should be maximized or minimized in order to enhance a varistor’s life. Alternately, given a predetermined amount of the varistor’s life, the model predicts a safe operating voltage under a given set of conditions.
Similar content being viewed by others
References
M. Matsuoka, Jpn. J. Appl. Phys. 10, 736 (1971).
L. M. Levinson and H. R. Phillip, J. Appl. Phys. 46, 1332 (1975).
P. L. Hower and T. K. Gupta, J. Appl. Phys. 50, 4847 (1979).
G. E. Pike, in Grain Boundaries In Semiconductors, edited by H. J. Leamy, G. E. Pike, and C. H. Seager (Elsevier, New York, 1982), pp. 369–379.
K. Eda and A. Iga, Jpn. J. Appl. Phys. 18, 997 (1979).
K. Eda, A. Iga, and M. Matsuoka, J. Appl. Phys. 51, 2678 (1980).
C. G. Shirley and W. M. Paulson, J. Appl. Phys. 50, 5782 (1979).
K. Sato, Y. Takada, H. Maekawa, M. Ototake, and S. Tominaga, Jpn. J. Appl. Phys. 19, 909 (1980).
S. Tominaga, Y. Shibuy, Y. Fujiwara, M. Imataki, and T. Nitta, IEEE Trans. Power Appar. Sys. 99 (4), 1548 (1980).
W. Moldenhauer, K. H. Bather, W. Bruckner, D. Hizn, and D. Buhling, Phys. Status Solidi A 67, 533 (1981).
T. K. Gupta, W. G. Carlson, and P. L. Hower, J. Appl. Phys. 52, 4104 (1981).
K. Takahashi, T. Miyoshi, K. Meada, T. Yamazaki, and S. Ohwada, in Ref. 4, pp. 399–404.
T. K. Gupta, in the 1984 IEEE Conference on Electrical Insulation and Dielectric Phenomena, 21–25 October 1984, pp. 437–447.
T. K. Gupta and W. G. Carlson, Advances In Ceramics, edited by M. F. Yan and A. H. Heuer (American Ceramic Society, Columbus, OH, 1983), Vol. 7, pp. 30–40.
T. K. Gupta and W. G. Carlson, J. Appl. Phys. 53, 7401 (1982).
T. K. Gupta and W. G. Carlson, J. Mater. Sci. 20, 3487 (1985).
E. C. Sakshaug, J. S. Kresge, and S. A. Miske, IEEE Trans. Power Appar. Sys. 96 (2), 647 (1977).
S. A. Seeker, in Technical Data on Metal Oxide Arresters For Overhead Distribution System (McGraw-Hill, Edison, NJ, 1980).
M. Oyama, I. Ohshima, M. Honda, M. Yamashita, and S. Kohima, presented in the Proceedings of the IEEE Power Engineering Society Summer Meeting, Portland, Oregon, 26–31 July 1981, Manuscript No. 81-5M-303-7.
W. G. Carlson, T. K. Gupta, and A. Sweetana, IEEE Trans. Power Del. 1 (2), 67 (1986).
M. Matsuoka, K. Eda, K. Kuchiba, T. Masuyama, and A. Nishigori, A High Voltage ZNR Absorber, National Technical Report (Matsushita Electric Company, Osaka, Japan, 1975), Vol. 21, pp. 109–122.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gupta, T.K. Effect of material and design parameters on the life and operating voltage of a ZnO varistor. Journal of Materials Research 2, 231–238 (1987). https://doi.org/10.1557/JMR.1987.0231
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1987.0231