References
Thompson E G et al: ‘Practical solutions to strain-age cracking of Rene 41’. Welding Journal 1968 47(7) 299–313.
Berry T F and Hughes W P: ‘A study of the strain-age cracking characteristics in welded Rene 41’. Welding Journal 1969 48(11) 503–513.
Morochko V P et al: Nature of failure of welded joints in creep-resisting nickel alloys in heating’. Svar Proiz 1987 (7) 27–28.
Weiss S et al: ‘Welding evaluation of high temperature sheet materials by restrained patch testing’. Welding Journal 1962 41(1) 17–22.
Hughes W P and Berry T F: ‘A study of the strain-age cracking characteristics in welded Rene 41. Ph.1’. Welding Journal 1967 46(8) 361–370.
Borzdyka A M and Getsov L B: 'Relaxation in metals and alloys’. Publ Metallurgiya Moscow 1978.
Kurkin A S: ‘Thermal-strain processes in welding. A handbook’. In: Welding unwelded materials. Publ Metallurgiya Moscow 1991.
Nikolaev G A et al: 'Welded structures’. Publ Vysshaya Shkola 1982.
Sorokin L I: ‘Stresses and cracks in welding and heat treatment of creep resisting nickel alloys’. Svar Proiz 1999 (12) 11–17.
Bagdasarov Yu S et al: ‘Selecting the criterion for evaluating the crack formation resistance of nickel alloys and heat treatment after welding’. Svar Proiz 1982 (8) 11–13.
Skvortsov E A and Golubev V N: ‘Cracking of welded joints in austenitic dispersion-hardening alloys in heat treatment’. Svar Proiz 1978 (4) 9–10.
Frenklen J E and Savage W F: ‘Stress relaxation and strain-age cracking in Rene 41 weldments’. Welding Journal 1974 53(9) 380–387.
Martyshin G V and Khoroshova V B: ‘Some special features of welding thin sheet structures of dispersion hardening nickel alloy VZh101’. Avt Svarka 1973 (1) 11–20.
Morochko V P et al: ‘Effect of the heat treatment conditions of KhN73MBTYu (EI648) creep resisting alloys’. Svar Proiz 1979 (5) 23–34.
D'Annessa A M and Owens J S: ‘Effects of furnace atmosphere on heat treated cracking Rene 41 weldments’. Welding Journal 1973 52(12) 568–579.
Bagdasarov Yu S et al: ‘Evaluating the crack formation resistance of welded joints of nickel alloys in heat treatment’. Svar Proiz 1981 (1) 36–38.
Volchenko V N: ‘Physical fundamentals, energy sources and classification of welding processes. A handbook’. In: Welding and welded materials. Publ Metallurgiya Moscow 1991 1 {pp18–31}.
Sagalevich V M: 'Methods of reducing welding stresses and strains’. Publ Mashinostroenie Moscow 1979.
Sorokina Yu G and Yuganova S A: ‘Kinetics of growth on the ?'-phase in Ni-Cr-W-Mo alloys with different Al/Ti content’. Metallovedenie I Termicheskaya Obrabotka Metallov 1970 (3) 8–12.
Prager M and Shira C S: ‘Welding of precipitation-hardening nickel-base alloys’. Welding Research Council Bulletin 1968 (128) 18–21.
Cims C and Hagel W: 'Creep-resisting alloys’. Publ Metallurgiya Moscow 1976.
Sorokin L I and Tupikin V I: ‘Classification of creep-resisting nickel alloys on the basis of their crack formation resistance in heat treatment of welded joints’.Avt Svarka 1985 (5) 23–25.
Sorokin L I: Weldability of heat resisting alloys used in radiation gas turbine engines. Svar Proiz 1997 (4) 4–8.
Zhurkina G V et al: ‘Effect of alloying and furnace composition on the cracking susceptibility of nickel welded alloys’. In: Structural and creep-resisting materials for new technology. Publ Nauka 1978.
Lashko N F (ed): 'Physico-chemical methods of phase analysis of steels and alloys’. Publ Metallurgiya Moscow 1970.
Zimina L N: ‘Niobium in creep-resisting alloys and steels’. Metallovedenie i Termicheskaya Obrabotka Metallov 1972 (10) 57–63.
Zimina L N: ‘Weldable creep-resisting nickel alloys and reasons for alloying them’. Metallovedenie i Termicheskaya Obrabotka Metallov 1977 (11) 2–7.
Bagdasarov Yu S et al: ‘Effect of the technological methods on the crack formation resistance of welded joints in nickel alloys in heat treatment’. Svar Proiz 1983 (4) 23–26.
Sorokin L I et al: ‘Weldability of cast creep-resisting nickel alloys of the ZhS6 type’. Svar Proiz 1997 (6) 12–47.
Jahnke B: ‘High temperature electron beam welding of the nickel-base superalloy JN-738LC’. Welding Journal 1982 61(11) 343–347.
Rights and permissions
About this article
Cite this article
Sorokin, L.I. Evaluation of crack formation resistance in welding and heat treatment of creep resisting nickel alloys. Welding International 18, 379–385 (2004). https://doi.org/10.1533/wint.2004.3297
Issue Date:
DOI: https://doi.org/10.1533/wint.2004.3297