References
Ed Jpn Friction Welding Association: 'Friction welding'. Korona Press 1979.
Scott M H and Squire I F: 'Metallurgical examination of aluminium-stainless steel friction welds'. Brit Weld J 1966 13(2) 151–164.
Jessop T J and Dinsdale W O: 'Mechanical testing of dissimilar metal friction welds'. Welding Res Int1976 6(2) 1–22.
Hasui A et al: 'Friction welding of aluminium and carbon steel'. J Jpn Weld Soc 1977 46(12) 858–862 (in Japanese).
Elliott S and Wallach E R: 'Joining aluminium to steel. Part 2: Friction welding'. Metal Constr 1981 13(4) 221–226.
Kikuchi M et al: 'Bonding interfaces in friction-and explosive-welded aluminium and steel joints'. J Jpn Inst Light Met 1984 34(3) 165–173 (in Japanese).
Yashan D et al: 'Inertia friction welding of 1100 aluminium to type 316 stainless steel'. Weld J 1987 66 27–37.
Ochi H et al: 'Tensile, bending, and torsional strength of friction-welded joints of 6061 aluminium alloy and S45C carbon steel'. J Jpn Soc Str Frct Mat 1994 28(4) 143–154 (in Japanese).
Ochi H et al: 'Impact and fatigue strength of friction-welded joints of 6061 aluminium alloy and S45C carbon steel'. J Jpn Soc Str Frct Mat 1995 29(1) 17–25 (in Japanese).
Ochi H et al: 'Friction welding of 2017 and 6061 aluminium alloys to S45C carbon steel'. J Soc Mat Sci Jpn 1996 45(4) 459–464 (in Japanese).
Ochi H et al: 'Static strength of friction-welded joints of 6061 aluminium alloy to SUS 304 stainless steel'. J Jpn Inst Light Met 1996 46(10) 500–504 (in Japanese).
Fukumoto S et al: 'Evaluation of friction weld interface of aluminium to austenitic stainless steel joints'. Mater Sci Technol 1997 13 679–686.
Ochi H et al: 'Dynamic strength of friction-welded joints of 6061 aluminium alloy to SUS 304 stainless steel'. J Jpn Inst Light Met 1997 47(6) 347–351 (in Japanese).
Fukumoto S et al: 'Microstructures of friction-welded joints of 6061 aluminium alloy to SUS 304 stainless steel'. J Jpn Inst Light Met 1998 48(1) 36–41 (in Japanese).
Ohue Y et al: 'Fatigue strength characteristics of A6061/SUS 304 friction-welded butt joints'. J Jpn Inst Light Met 1998 48(9) 459–464 (in Japanese).
Ochi H et al: 'Friction welding of aluminium alloy and steel'. Int J Offshore and Polar Engng 1998 8(2) 140–143.
Fukumoto S et al: 'Friction welding process of 5052 aluminium alloy to 304 stainless steel'. Mater Sci Technol 1999 15 1080–1086.
Shinoda T et al: 'Friction welding of aluminium and plain low-carbon steel'. Q J Jpn Weld Soc 2000 18(3) 365–372 (in Japanese).
Nicholas T: 'Tensile testing of materials at high rates of strain'. Exp Mech 1981 21(5) 177–185.
Cailler M et al: 'Mechanical characterisation by dynamical tensile loading of 2017 aluminium alloy joints welded by diffusion bonding'. J Mater Sci 1991 26 4997–5003.
Debbouz O and Navai F: 'Mechanical characterisation by dynamical tensile loading of 2017 aluminium alloy joints welded by diffusion bonding. New results and SEM observations of the failure surfaces'. J Mater Sci 1997 32 475–482.
Yokoyama T and Yanaguchi M: 'Impact tensile strength of 6061 aluminium alloy/S45C carbon steel friction-welded butt joints'. J Jpn Inst Light Met 1999 49(11) 525–541 (in Japanese).
Yokoyama T and Ogawa K: 'Stress-strain characteristics of S45C carbon steel friction-welded butt joints under impact tensile loading'. Q J Jpn Weld Soc 2001 19(3) 513–520 (in Japanese).
Graff K F: 'Wave motion in elastic solids'. Oxford University Press 1975 130–133.
Johnstone C and Ruiz C: 'Dynamic testing of ceramics under tensile stress'. Int J Solids Struct 1995 32(17/18) 2647–2656.
Yokoyama T and Kishida K: 'A microcomputer-based system for high-speed compression test by the split Hopkinson pressure bar technique'. J Test Eval 1986 14(5) 236–242.
Rights and permissions
About this article
Cite this article
Yokoyama, T., Ogawa, K. Impact tensile properties of 6061 aluminium alloy to SUS 304 stainless steel friction-welded butt joints. Welding International 17, 514–523 (2003). https://doi.org/10.1533/wint.2003.3118
Issue Date:
DOI: https://doi.org/10.1533/wint.2003.3118