This is a preview of subscription content, log in via an institution to check access.
Literaturhinweise
Bohlen, J.; Nürnberg, M; Senn, J.W.; Letzig, D.; Agnew, S. R.: The texture and anisotropy of magnesium-zinc-rare earth alloy sheets, Acta Materialia 55 (), S.
Yi, S.; Bohlen, J.; Heinemann, F. and Letzig, D.: Mechanical anisotropy and deep drawing behavior of AZ31 and ZE10 magnesium alloy sheets, Acta Materialia, 58, 2010, S. 592–605
Kurz, G.: Temperiertes hydromechanisches Tiefziehen von Magnesiumblechen, Dissertation, Universität Hannover, 2004
Letzig, D.; Fuskova, L.; Hantzsche, K.; Kurz, G.; Yi, S. B.; Bohlen, J.: Formability of Magnesium sheets, In: Proc. of the TMS (2009)
Stutz, L.; Bohlen, J.; Letzig, D.; Kainer, K.U.: Formability of magnesium sheet ZE10 and AZ31 with respect to initial texture, In Sillekens, W., Agnew, S.R., Mathaudhu, S. N. Neelameggham, N.R., Magnesium Technology 2011, Warrendale, The Minerals, Metals & Materials Society TMS, 2011, S. 373–378
Basson, F.; Letzig, D.: Aluminium twin roll casting transfers benefits to magnesium. Aluminium International Today, November/December 2010, S. 19–21
Kawalla, R.; Engl, B.: Magnesiumblechherstellung: Stand und Perspektiven. ME-FORM 2006, Tagungsband, S. 81–95
Watari, H. et al.: Development of manufacturing process of wrought magnesium alloy sheets by twin roll casting, in: Journal of Achievements in Materials and Manufacturing Engineering, Nr., International OCSCO World Press, 2007
POSCO Co. Ltd, Internetseite: www.poscomagnesium.com
Park, S. S.; Lee, J. G.; Lee, H. C.; Kim, N. J.: Development of wrought Mg alloys via strip casting Magnesium Technology 2004, Charlotte, North Carolina: TMS, 2004: S. 14–182
Park, S. S.; Kim, Y. M.; Kang, D. H.; Kim, N. J.: Development of Mg alloy sheets via strip casting; Materials Science Forum, 2005, 475/479: 457–462
Park, S. S.; Bae, G. T.; Lee, J. G.; Kang, D. H.; Shin, K. S.; Kim, N. J.: Microstructure and mechanical properties of twin-roll strip cast Mg alloys; Materials Science Forum, 2007, 539/543: S. 119–126
Kang, S. B.; Chen, H.; Kim, H. W.; Cho, J. H.: Effect of reheating and warm rolling on microstructure and mechanical properties of twin roll strip cast Mg-4.5Al-1.0Zn-0.4Mn-0.3Ca alloy sheet; Magnesium Technology 2008. New Orleans, Louisiana: TMS, 2008: S. 147–152
Kurz, G.; Letzig, D.; Kainer, K. U.: Die Rolle nachhaltiger Prozesstechnologien bei der Entwicklung fortschrittlicher Magnesium-Werkstoffe, Erzmetall 66/2013 No. 1, S. 22–27
ThyssenKrupp Magazine, 2004, Internetseite: www.thyssenkrupp.com
Kawalla, R.; Oswald, M.; Schmidt, C.; Ullmann, M.; Vogt, H. P.; Cuong, N. D.: Development of a strip-rolling technology for Mg alloys based on the twin-roll-casting process; Magnesium Technology 2008. New Orleans, Louisiana: TMS, 2008: S. 177–182
Engl, B.: Future aspects of magnesium sheet materials using a new production technology; 62nd Annual World Magnesium Conference. Berlin, 2005: S. 27–34
Kawalla, R.; Oswald, M.; Schmidt, C.; Ullmann, M.; Vogt, H. P.; Cuong, N. D.: Development of a strip-rolling technology for Mg alloys based on the Metalurgija, 2008, 47(3): S. 195–198
Zhao, H. et al.: Microstructure of asymmetric twin-roll cast AZ31 magnesium alloy, Transactions of Nonferrous Metals Society of China, Nr. 21, Elsevier, 2011
Masoumi, M. et al.: Alleviation of basal texture in twin-roll cast Mg-3Al-1Zn alloy. In: Scripta Materialia, Nr. 62, Elsevier, 2010
Author information
Authors and Affiliations
About this article
Cite this article
Kurz, G., Bohlen, J. & Letzig, D. Der Einfluss des Gießwalzprozesses auf die Eigenschaften des Dünnbands. Lightweight Des 6, 52–57 (2013). https://doi.org/10.1365/s35725-013-0303-8
Published:
Issue Date:
DOI: https://doi.org/10.1365/s35725-013-0303-8