Probengeometrie zur Untersuchung von gewickelten Faserverbundproben

Entwickelt und validiert

This is a preview of subscription content, access via your institution.

Bild 1
Bild 2
Bild 3
Bild 4
Bild 5
Bild 6

Literaturhinweise

  1. [1]

    Ehrenstein, G.W.: Faserverbundkunststoffe - Werkstoff - Verarbeitung - Eigenschaften. Carl Hanser Verlag München Wien, 2. Auflage, 2006

  2. [2]

    Green, A.K.; Shikhmanter, L.: Coupon development for fatigue testing of bonded assamblies of pultruded rods. Composites: Part A, Vol. 30, pp. 611-613, 1999

  3. [3]

    Chen, W.; Yu, Y.; Li, P.; Wang, C.; Zhou, T.; Yang, X.: Effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites. Composites Science and Technology, Volume 67, Issues 11-12, pp. 2261-2270, 2007

  4. [4]

    Zhang, J.S.; Karbhari, V.M.; Wu, L.; Reynaud, D.: NOL-ring based evaluation of freeze and freeze–thaw exposure effects on FRP composite column wrap systems. Composites Part B: Engineering, Vol. 32, Issue 7, pp. 589-598, 2001

  5. [5]

    Zhang, J.S.; Karbhari, V.M.; Wu, L.; Reynaud, D.: Field exposure based durability assessment of FRP column wrap systems. Composites Part B: Engineering, Vol. 34, Issue 1, pp. 41-50, 2003

  6. [6]

    Yoon, S.-H.; Kim, C.-G.; Cho, W.-M.: Measurement of Tensile Properties Using Filament Wound Ring Specimens. Journal of Reinforced Plastics and Composites, Vol. 16, pp. 810824, 1997

  7. [7]

    Kim, M.-G.; Kang, S.-G.; Kim, C.-G.; Kong, C.-W.: Thermally induced stress analysis of composite/aluminum ring specimens at cryogenic temperature. Composites Science and Technology, Vol. 68, Issues 3-4, pp. 1080-1087, 2008

  8. [8]

    Meziere, Y.; Bunsell, A.R.; Favry, Y.; Teissedre, J.-C.; Do, A.T.: Large strain cyclic fatigue testing of unidirectional carbon fibre reinforced epoxy resin. Composites Part A: Applied Science and Manufacturing, Vol. 36, Issue 12, pp. 1627-1636, 2005

  9. [9]

    Jones, I.A.; Middleton, V.; Owen, M.J: Roller-assisted variant of the split disc test for filament-wound composites. Composites Part A: Applied Science and Manufacturing, Vol. 27, Issue 4, pp. 287-294, 1996

  10. [10]

    Green, A. K.; Shikhmanter, L.: Coupon development for fatigue testing of bonded assemblies of pultruded rods. Composites: Part A: applied science and manufacturing, Vol. 30, pp. 611-613, 1999

  11. [11]

    Schwarz, M., Schürmann, H.: Die gezielte Ringverstärkung von Bauteilen – ein werkstoffgerechtes Einsatzgebiet für Faser-Kunststoff-Verbunde? 11. Nationales Symposium SAMPE Deutschland 2005

Download references

Authors

About this article

Cite this article

Hoffmann, M., Gregor, C., Schulz, M. et al. Probengeometrie zur Untersuchung von gewickelten Faserverbundproben. Lightweight Des 5, 44–49 (2012). https://doi.org/10.1365/s35725-012-0022-6

Download citation