Literaturhinweise
Spangenberg, S.; Kemnitz, P.; Kopf, E.; Repgen, B.: Massereduzierung an Bauteilen des Kurbeltriebs – Pleuel im Fokus. In: MTZ 67 (2006), Nr. 4
Capus, J.: Crunch time at SAE leaves the C-70 con rod case bent and very battered. In Metal Powder Report, June 2005
Dale, J. R.: Connecting Rod Evaluation. MPIF 2005
Wegner, K.-W.: Werkstoffentwicklung für Schmiedeteile im Automobilbau. In: ATZ 100 (1998), Nr. 12
Repgen, B.: Optimized Connecting Rods to Enable Higher Engine Performance and Cost Reduction. SAE Technical Paper Series 980882
Kato, S. et al.: Development of Microalloyed Steel for Fracture Split Cennecting Rod. SAE Technical Paper Series 2007-01-1004
Depp, C.; Ilia, E.; Hähnel, M.: Neue hochfeste Werkstoffe für sintergeschmiedete Pleuelstangen. In: MTZ 66 (2005), Nr. 4
Ilia, E.; Tutton, K.; O’Neill, M.: Impact of Copper and Carbon on Mechanical Properties of Iron-Carbon-Copper Alloys for Powder Metal Forging Applications, Advances in Powder Metallurgy & Particulate Materials, Vol. 3. Metal Powder Industries Federation, Princeton, NJ, 2004, part 10
Ilia, E.; Tutton, K.; O’Neill, M.; Lanni, G.; Letourneau, S.: New Improvements in Materials Used to Manufacture Powder Forged Connecting Rods. SAE Technical Paper Series 2007-01-1556
Suzuki, H.; Sawayama, T.; Ilia, E.; Tutton, K.: New Material with Improved Machinability and Strength for powder Forged Connecting Rods. SAE Technical Paper 2006-01-0604
Sonsino, C. M.: „Dauerfestigkeit“ – Eine Fiktion. In: Konstruktion 57 (2005), Nr. 4
Sonsino, C. M.; Kaufmann, H.; Grubisic, V.: Übertragbarkeit von Werkstoffkennwerten am Beispiel eines betriebsfest auszulegenden geschmiedeten Nutzfahrzeug-Achsschenkels. In: Konstruktion 47, (1995) Nr. 7/8
Sonsino, C. M.; Kaufmann, H.; Grubisic, V.: Transferability of Material Data for the Example of a Randomly Loaded Forged Truck Stub Axle. SAE Technical Paper Series 970708
Ilia, E.; O’Neill, M.; Tutton K. et al.: Benchmarking the Industry: Powder Forging Makes a Better Connecting Rod. SAE Technical Paper Series 2005-01-0713
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lipp, K., Kaufmann, H. Schmiede- und Sinterschmiedewerkstoffe für Pkw-Pleuel. MTZ Motortech Z 72, 416–421 (2011). https://doi.org/10.1365/s35146-011-0096-1
Published:
Issue Date:
DOI: https://doi.org/10.1365/s35146-011-0096-1