ADHESION ADHESIVES&SEALANTS

, Volume 11, Issue 1, pp 38–43 | Cite as

Polyelectrolyte adsorption adds to laser pre-treatment

Improving the strength of bonded aluminium joints
  • Tom Schiefer
  • Ralf Frenzel
  • Irene Jansen
  • Alfredo Calvimontes
  • Frank Simon
Research and Development
First Online:
  • 9 Downloads
This is a preview of subscription content, log in to check access.

Notes

Acknowledgements

This IGF (Industrielle Gemeinschaftsforschung) project, No. 16532 BR, was initiated by the DECHEMA (Gesellschaft für Chemische Technik und Biotechnologie e. V.), Theodor Heuss-Allee 25, 60486 Frankfurt am Main, Germany. The project was funded through the AiF (Arbeitsgemeinschaft industrieller Forschungsvereinigungen) in the context of a program supporting industrial community research and development (IGF). Funding was provided by the Federal Ministry of Economics and Technology after a resolution of the German Bundestag.

The authors would like to express their gratitude to the following companies: Clean-Lasersysteme GmbH, Delo Industrie Klebstoffe GmbH & Co KGaA, EdgeWave GmbH, Erbslöh AG, Inpro mbH, Lohmann GmbH & Co. KG and Stepanski Engineering — companies which all generously and unselfishly supported and facilitated these studies.

References

  1. [1]
    Büchter, E.: Punktgenaues Entschichten mit Laserlicht. JOT Oberflächentechnik 41 (2001) 52–54.CrossRefGoogle Scholar
  2. [2]
    Stammen, E.; Dilger, K.; Böhm, S.; Hose, R.: Surface Modification with Laser: Pre-treatment of Aluminium Alloys for Adhesive Bonding. Plasma Processes Polym. 4 (2007) S39–S43CrossRefGoogle Scholar
  3. [3]
    Rechner, R.; Jansen, I.; Beyer, E.: Influence on the strength and aging resistance of aluminium joints by laser pre-treatment and surface modification. Internat. J. Adhes. Adhes. 30 (2010) 595–601CrossRefGoogle Scholar
  4. [4]
    Rechner, R.; Jansen, I.; Beyer, E.: Laser- und Plasmaverfahren im wirtschaftlichen Vergleich. Adhäsion kleben & dichten 54 (2010) 1–2, 36–42Google Scholar
  5. [5]
    Rechner, R.: Laseroberflächenvorbehandlung von Aluminium zur Optimierung der Oxidschichteigenschaften für das strukturelle Kleben. Dissertation, TU Dresden 2012Google Scholar
  6. [6]
    Alfano, M.; Ambrogio, G.; Crea, F.; Filice, L.; Furgiuele, F.: Influence of Laser Surface Modification on Bonding Strength of Al/Mg Adhesive Joints. J. Adhes. Sci. Technol. 25 (2011) 1261–1276CrossRefGoogle Scholar
  7. [7]
    Alfano, M.; Lubineau, G.; Furgiuele, F.; Paulino, G. H.: Study on the role of laser surface irradiation on damage and decohesion of Al/epoxy joints. Internat. J. Adhes. Adhes. 39 (2012) 33–41CrossRefGoogle Scholar
  8. [8]
    Köckritz, K.; Schiefer, T.; Jansen, I.; Beyer, E.: Improving the bond strength at hybrid-yarn textile thermoplastic composites for high-technology applications by laser radiation. Internat. J. Adhes. Adhes. 46 (2013) 85–94CrossRefGoogle Scholar
  9. [9]
    Sauer, J.: Aluminiumvorbehandlung, prozeßtechnisch und ökologisch durchdacht. Adhäsion kleben & dichten 40 (1996) 11, 30–32Google Scholar
  10. [10]
    Broad, R.; French, J.; Sauer, J.: CLP — New, effective, ecological surface pretreatment for highly durable adhesively bonded metal joints. Internat. J. Adhes. Adhes. 19 (1999) 193–198CrossRefGoogle Scholar
  11. [11]
    Höhne, S.; Frenzel, R.; Blank, C.; Thieme, M.; Worch, H.; Heppe, A.; Simon, F.: In Metalloberflächen verankerte Polymere zur Herstellung ultrahydrophober Metalloberflächen. Materwiss. Werksttech. 39 (2008) 924–927CrossRefGoogle Scholar
  12. [12]
    Höhne, S.; Blank, C.; Mensch, A.; Thieme, M.; Frenzel, R.; Worch, H.; Müller, M.; Simon, F.: Super-hydrophobic alumina surfaces based on polymer-stabilized oxide layers. Macromol. Chem. Phys. 210 (2009) 1263–1271CrossRefGoogle Scholar
  13. [13]
    Bucatariu, F.; Simon, F.; Fundueanu, G.; Dragan, E. S.: Design of silica microparticles with oligopeptide brushes and their interaction with proteins. Colloid. Polym. Sci. 289 (2011) 33–41CrossRefGoogle Scholar
  14. [14]
    van den Brand, J.; Van Gils, S.; Beentjes, P.C.J.; Terryn, H.; Sivel, V.; de Wit, J.H.W.: Improving the adhesion between epoxy coatings and aluminium substrates Prog. Org. Coat. 51 (2004) 339–350CrossRefGoogle Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2014

Authors and Affiliations

  • Tom Schiefer
    • 1
  • Ralf Frenzel
    • 3
  • Irene Jansen
    • 2
  • Alfredo Calvimontes
    • 3
  • Frank Simon
    • 3
  1. 1.Technische Universität DresdenDresdenGermany
  2. 2.Fraunhofer-Institut für Werkstoff- und Strahltechnik DresdenDresdenGermany
  3. 3.Leibniz Institute of Polymer Research Dresden (Leibniz-Institut für Polymerforschung Dresden e.V.)DresdenGermany

Personalised recommendations