Abstract
The versatility of the laser beam cladding process as a means of localized surface treatment is highlighted in this article with an emphasis on applications in the field of repair and regeneration. A newly developed cladding technology using low power Nd:YAG lasers is also introduced. Small dimensions and minimal heat input allow high precision cladding. Short interaction times and good control of the process enable the generation of graded composite coatings. Application examples in the field of regeneration of components are given. An industrial case study presents the CO2 laser repair of large engine components.
Similar content being viewed by others
References
B.L. Mordike, Industrial Applications of Laser Surface Treatment, Proceedings of ECLAT ’94, G. Sepold, Ed., DVS-Verlag, Düsseldorf, 1994, p 173–187
F. Hensel, C. Binroth, and G. Sepold, A Comparison of Powder-and Wire-Fed Laser Beam Cladding, Laser Treatment of Materials: Proc. ECLAT’92, B.L. Mordike, Ed., DGM Informationsgesellschaft, Oberursel, 1992, p 39–44
E. Schubert, Oberflächenbearbeitung Mit dem Laser, Moderne Beschichtungsverfahren, H.-D. Steffens and J. Wilden, Ed., DGM Informationsgesellschaft, Oberursel, 1996, p 157–174 (in German)
S. Nowotny and A. Müller, Lasertechnologien für Keramische Beschichtungen, Ber. DKG, Vol 10 (No. 2), 1995, p 47–57 (in German)
E. Lugscheider, H. Bolender, K. Hochmuth, G. Herziger, A. Gasser, K. Wissenbach, et al., One-Step Powder Cladding of Oxide Ceramics on Metal Substrates with CO2 Laser Radiation, Proc. ECLAT’94, G. Sepold, Ed., Verlag, Düsseldorf, 1994, p 213–218
A. Lang, H. Waldmann, and H.W. Bergmann, Cladding of Metallic Substrates with Diamonds and Cubic Boron Nitride, Proc. ECLAT’94, G. Sepold, Ed., DVS-Verlag, Düsseldorf, 1994, p 456–461
A. Rinn, T. Seefeld, B. Heidenreich, and E. Schubert, Regenerienren mit CO2- und Nd:YAG-Lasern im Maschinenbau und in der Feinwerktechnik, Five Symp. Trends in der Schweißtechnik, B. Heidenreich, Ed., DVS Bremen, Bremen, 1996 (in German)
VDI-TZ, Präzisionsbearbeitung mit Festkörperlasern, VDI-Verlag, Düsseldorf, 1995, (in German)
F. Dausinger, Strahlwerkzeug Laser: Energieeinkopplung und Prozeßeffektivität, Teubner, Stuttgart, 1995 (in German)
H.-D. Steffens, Z. Babiak, and U. Fischer, Herstellen Metall-Keramischer Verbundkörper u.a. Mit Gradiertem Aufbau, Verbundwerkstoffe, Stoffverbunde Band 1: Technik, G. Ondracek, Ed., DGM Informationsgesellschaft, Oberursel, 1988, p 129–136 (in German)
S. Sampath, H. Herman, N. Shimoda, and T. Saito, Thermal Spray Processing of FGMs, MRS Bull., Vol 20 (No. 1), 1995, p 27–31
A. Schüßler, Microstructure and Properties of Laser Processed Composite Layers, Laser Treatment of Materials: Proc. ECLAT’92, B.L. Mordike, Ed., DGM Informationsgesellschaft, Oberursel, 1992, p 287–292
K. Mohammed Jasim, R.D. Rawlings, and D.R.F. West, Metal-Ceramic Functionally Gradient Material Produced by Laser Processing, J. Mater. Sci., Vol 28, 1993, p 2820–2826
R. Becker, H. Kohn, G. Sepold, and P. Seyffarth, Lasergestützte Regenerierung von Kolbenoberteilen für Großdieselmotoren, Schiffs-Ingenieur J., 1990, p 24–28
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Schubert, E., Seefeld, T., Rinn, A. et al. Laser beam cladding: A flexible tool for local surface treatment and repair. J Therm Spray Tech 8, 590–596 (1999). https://doi.org/10.1361/105996399770350296
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1361/105996399770350296