Abstract
Zr-based nitride and carbide coatings have been deposited on high-speed steel by the cathodic arc method. Hot-filament chemical vapor deposition (CVD) has been used to deposit diamond films onto a treated steel surface. The films deposited by CVD were characterized using scanning electron microscopy, x-ray diffraction, and Raman spectroscopy to determine the surface morphology, roughness, crystal structure, and bonding characteristics.
Similar content being viewed by others
References
D.P. Monaghan, D.G. Teer, R.D. Arnell, I. Efeoglu, and W. Ahmed, Ion-Assisted CVD of Graded Diamond-Like Carbon (DLC) Based Coatings, J. De Physique IV, 3(C3), 1993, p 579–587
J. Colligon, Ion Assisted Sputter Deposition—Sputtering Past, Present, and Future, Philos. Trans. R. Soc., 2004, 362, p 103–116
S. Iijima, Y. Aikawa, and K. Baba, Growth of Diamond Particles in CVD, J. Mater. Res., 1991, 6, p 1491–1498
E. Molinari, R. Polini, and M. Tomellini, Diamond Crystallite Formation on Si (110) From the Gas Phase: Seeding or Heterogeneous Nucleation, Appl. Phys. Lett., 1992, 61, p 1287–1289
R. Polini, G. Marcheselli, and E. Traversa, Deposition of Diamond on Tungsten Carbide Ceramic Materials Using HFCVD, J. Am. Ceram. Soc., 1994, 77(517), p 1287–1289
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Amar, M., Ahmed, W., Taylor, H. et al. Hot-filament chemical vapor deposition of polycrystalline diamond coatings to interlayered steel. J. of Materi Eng and Perform 15, 187–191 (2006). https://doi.org/10.1361/105994906X95850
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1361/105994906X95850