Abstract
Despite the recent extensive examination of electroless coatings, the effect of the preplating processes on the formation of electroless coatings has remained unresolved. The ability of different preplating processes, degreasing and pickling, to clean the contaminated copper surface before deposition was studied by contact angle determinations, residual oil measurements, and potentiostatic polarization cycles. The influence of preplating processes on the buildup of electroless tin coatings and subsequent deposit structure was studied by scanning electron microscopy. Alkaline degreasers were found to effectively eliminate the organic soil from the surface, thus facilitating uniform coating nucleation and good adhesion properties. Pickling gave rise to a regular coating appearance throughout the structure. In addition, the applicability of contact angle measurements for studying the efficiency of cleaning treatments was demonstrated.
Similar content being viewed by others
References
J. Henry: Met. Finishing, 1997, vol. 95 (1A), pp. 412–23.
G.A. Walker and C.G. Goldsmith: Thin Solid Films, 1978, vol. 53, pp. 217–22.
C.F. Beer: Surface Technol., 1981, vol. 12, pp. 89–92.
Metals Handbook, ASM, Metals Park, OH, 1982, vol. 5, pp. 611–28.
B. Haase and J. Dong: Surface Eng., 1998, vol. 14 (1), pp. 43–48.
D.M. Mattox: Thin Solid Films, 1985, vol. 124, pp. 3–10.
F.W. Pontius: J. Am. Water Works Assoc., 1999, vol. 91 (3), pp. 46–58.
Update Safe Drinking Water Act, Mar. 1999, an Attachment to F.W. Pontius and W.R. Diamond, Complying with the Stage 1D/DBP Rule: J. Am. Water Works Assoc., 1999, vol. 91 (3), pp. 16–32.
A. Shanley: Chem. Eng., 1998, No. 11, pp. 69–72.
N. De Zoubov, C. Vanleugenhaghe, and M. Pourbaix: in Atlas of Electrochemical Equilibria in Aqueous Solutions, M. Pourbaix, ed., Pergamon Press Ltd., Oxford, United Kingdom, 1966, pp. 384–92.
G. Ekström: Lärobok i Elektrolytisk och Kemisk Ytbehandling, Sveriges Galvanotekniska Förening, Linköping, 1994, vol. 1 (in Swedish).
C.D. Iacovangelo and K.P. Zarnoch: J. Electrochem. Soc., 1991, vol. 138 (4), pp. 983–88.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Huttunen, E., Tiainen, T. Optimization of the preplating processes in the fabrication of electrolessly tin-coated copper tube. J. of Materi Eng and Perform 10, 157–163 (2001). https://doi.org/10.1361/105994901770345169
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1361/105994901770345169