Abstract
Work is being undertaken at Thermotech on the development of software for predicting a wide range of materials properties. These properties include thermophysical and physical properties, mechanical properties, TTT/CCT diagrams, etc., and the calculations are being applied to a variety of multicomponent alloy types, such as Ni-based superalloys, steels, Ti alloys, and AI alloys. The user interacts with the program using a simple graphical user interface and the software basis is designed to be platform independent, able to run on Windows 98/NT/2000, Linux, Unix-based workstations, etc. The new program is particularly aimed at multicomponent alloys used in industrial practice, and numerous examples of calculated results for the various properties will be presented with the emphasis being on validation of the calculated result against experimental observation.
Similar content being viewed by others
References
V.H. Their and A. Bäumel: Arch. Eisenhüttenwes., 1969, vol. 40, p. 333.
Atlas of Isothermal Transformation and Cooling Transformation Diagrams, ASM, Metals Park, OH, 1977, p. 391.
J.S. Kirkaldy, B.A. Thomson, and E.A. Baganis: in Hardenability Concepts with Applications to Steel, J.S. Kirkaldy and D.V. Doane, eds., AIME, Warrendale, PA, 1978, p. 82.
J.R. Toran and R.R. Biederman: Titanium ’80, TMS, Warrendale, PA, 1980, p. 1491.
H.L. Lukas, J. Weiss, and E.-T. Henig: CALPHAD, 1982, vol. 6, p. 229.
J.S. Kirkaldy and D. Venugopolan: in Phase Transformations in Ferrous Alloys, A.R. Marder and J.I. Goldstein, eds., AIME, Warrendale, PA, 1984, p. 125.
H.L. Cao, S. Hertzman, and W.B. Hutchinson: Proc. Conf. Stainless Steels, York 1987, Institute of Metals, London, 1988, p. 454.
P.W. Keefe, S.O. Mancuo, and G.E. Maurer: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, p. 467.
D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, Chapman & Hall, London, 1992.
S.T. Wlodek, M. Kelly, and D. Alden: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, p. 467.
J.O. Nilsson and A. Wilson: Mater. Sci. Technol., 1993, vol. 9, p. 545.
Z. Fan, P. Tsakiropoulos, and A.P. Miodownik: J. Mater. Sci., 1994, vol. 29, p. 141.
S. Bein and J. Bechet: in Titanium ’95: Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The Institute of Materials, London, 1995, p. 2353.
Z. Fan: Phil. Mag. A, 1996, vol. 73, p. 1663.
U.R. Kattner, W.J. Boettinger, and S.R. Coriell: Z. Metallkd., 1996, vol. 87, p. 522.
N. Saunders and A.P. Miodownik: in CALPHAD—Calculation of Phase Diagrams, Pergamon Materials Series vol. 1, R.W. Cahn, ed., Elsevier Science, Oxford, United Kingdom, 1998.
A.P. Miodownik and N. Saunders: “Variation of Elastic Moduli with Composition in Titanium Alloys,” paper presented at CALPHAD XXIX, Boston, MA, June 9–13, 2000.
X. Li, A.P. Miodownik, and N. Saunders: “Simultaneous Calculation of Mechanical Properties and Phase Equilibria,” paper presented at Int. Conf. User Application of Phase Diagrams, Sendai, Japan, Sept. 2000.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Saunders, N., Kucherenko, S., Li, X. et al. A new computer program for predicting materials properties. JPE 22, 463–469 (2001). https://doi.org/10.1361/105497101770333036
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1361/105497101770333036