Abstract
The Cu-Nb and Cu-Cr alloys at compositions ranging from 5 to 86 wt% Nb (89 wt% Cr) were processed in a clean environment and solidified at relatively low cooling rates of 50 to 75 °C/s to determine liquidus temperatures. In this study, both temperature measurements and microstructural observations confirmed the equilibrium phase diagram having an S-shaped, nearly flat liquidus, rather than that with a monotectic reaction in the liquid state. However, a metastable liquid miscibility gap exists in the two systems.
Similar content being viewed by others
References
D.A. Prokoshkin and E.V. Vasil’eva: in Alloys of Niobium, A.M. Samarin, ed., Daniel Davey & Co. Inc., New York, NY, 1965, pp. 128–30.
C. Allibert, J. Driole, and E. Bonnier: C.R. Acad. Sci. Paris Ser. C, 1969, vol. 268, pp. 1579–81 (in French).
J.L. Fihey, P. Nguyen-Duy, and R. Roberge: J. Mater. Sci., 1976, vol. 11, pp. 2307–11.
R. Roberge and J.L. Fihey: J. Appl. Phys., 1977, vol. 48, pp. 1327–31.
J.D. Verhoeven and E.D. Gibson: J. Mater. Sci., 1978, vol. 13, pp. 1576–82.
D.J. Chakrabarti and D.E. Laughlin: Bull. Alloy Phase Diagrams, 1982, vol. 2, pp. 455–60.
D.J. Chakrabarti and D.E. Laughlin: Bull. Alloy Phase Diagrams, 1984, vol. 5, pp. 59–68.
J.F. Smith, K.J. Lee, and D.M. Bailey: Bull. Alloy Phase Diagrams, 1984, vol. 5, pp. 133–34.
G.I. Terekhov and L.N. Aleksandrova: TR: Russ. Metall., 1984, vol. 4, pp. 218–21.
M. Leonov, N. Bochvar, and V. Ivanchenko: Akad. Nauk SSSR Dokl., 1986, vol. 290, pp. 888–90 (in Russian).
M.A. Morris and D.G. Morris: Acta Metall., 1987, vol. 35, pp. 2511–22.
N. Saunders: Mater. Sci. Technol., 1987, vol. 3, pp. 671–73.
J.D. Verhoeven, W.A. Spitzig, F.A. Schmidt, and C.L. Trybus: Mater. Manufacturing Processes, 1989, vol. 4, pp. 197–209.
M. Hamalainen, K. Jaaskelainen, R. Luoma, M. Nuotio, P. Taskinen, and O. Teppo: CALPHAD, 1990, vol. 14, pp. 125–37.
K.P. Cooper, J.D. Ayers, J.C. Malzahn Kampe, C.R. Feng, and I.E. Locci: Mater. Sci. Eng., 1991, vol. A142, pp. 221–33.
H. Okamoto: J. Phase Equilibria, 1991, vol. 12, pp. 614–15.
K.L. Zeik, D.A. Koss, I.E. Anderson, and P.R. Howell: Metall. Trans., A 1992, vol. 23A, pp. 2159–67.
T.W. Ellis, I.E. Anderson, H.L. Downing, and J.D. Verhoeven: Metall. Trans., A 1993, vol. 24A, pp. 21–26.
K. Zeng and M. Hamalainen: CALPHAD, 1995, vol. 19, pp. 93–104.
D.J. Chakrabarti and D.E. Laughlin: ASM’ Binary Alloy Phase Diagrams on CD-ROM, 2nd ed., ASMINTERNATIONAL, Materials Park, OH, 1996.
J. Stobrawa, L. Ciura, and Z. Rdzawski: Scripta Mater., 1996, vol. 34, pp. 1759–63.
J.B. Correia, H.A. Davies, and C.M. Sellars: Acta Mater., 1997, vol. 45, pp. 177–90.
D. Li, M.B. Robinson, T.J. Rathz, and G. Williasm: Acta Mater., 1998, vol. 46, pp. 3849–55.
M.B. Robinson, D. Li, and T.J. Rathz: Proceedings of SPIE, Materials Research in Low Gravity II, edited by N. Ramachandran, published by SPIE, Bellingham, WA, 1999, vol. 3792, pp. 202–208.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, D., Robinson, M.B. & Rathz, T.J. Measurements of liquidus temperatures in the Cu-Nb and Cu-Cr systems. JPE 21, 136 (2000). https://doi.org/10.1361/105497100770340183
Received:
Revised:
DOI: https://doi.org/10.1361/105497100770340183