Journal of Failure Analysis and Prevention

, Volume 4, Issue 5, pp 51–62 | Cite as

A thermal stress and failure model for laser cutting and forming operations

  • R. Akarapu
  • B. Q. Li
  • A. Segall
Peer Reviewed Articles

Abstract

A transient, full three-dimensional mathematical model that describes the ablation phenomena, the thermal stress evolution, and the failure process that occur during laser cutting or forming operations on ceramic plates is developed. The model development is based on the finite element simulation of thermal field and stress development during laser cutting or forming operations. To treat the ablation phenomena during laser cutting, a fixed-grid algorithm is applied to handle complex ablation geometries with discontinuities. This algorithm is essential for applications to multiple-laser cutting operations. The thermal and stress evolution model is further integrated with a probabilistic fracture model to assess the failure probability during both laser cutting and forming processes. Numerical results show that the groove shapes as well as the temperature and stress distributions are similar in front of the cutting laser for both single and dual lasers but differ in the region when the lead laser becomes effective in dual-beam machining.

Keywords

finite elements fracture laser ablation laser cutting laser forming thermal stresses 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    G. Chryssolouris, G. Anifantis, and N.S. Karagiannis: “Laser Assisted Machining: An Overview,” J. Manuf. Sci. Eng., 1997, 119(4B), pp. 766–69.Google Scholar
  2. 2.
    T.K. McDermott, J. Tillotson, Jr., and R.C. Phoenix: “Thick and Thin Film Manufacturers Find Laser Machining Cost Effective,” Hybrid Circuit Technol., 1988, 5(9), pp. 20–21.Google Scholar
  3. 3.
    J. Powell: CO 2 Laser Cutting, Springer, London, 1988.Google Scholar
  4. 4.
    I. Black: “Laser Cutting Speeds for Ceramic Tile: A Theoretical-Empirical Comparison,” Opt. Laser Technol., 1998, 30(2), pp. 95–101.CrossRefGoogle Scholar
  5. 5.
    M.F. Modest: “Three-Dimensional, Transient Model for Laser Machining of Ablating/Decomposing Materials,” Int. J. Heat Mass Transf., 1996, 39(2), pp. 221–34.CrossRefGoogle Scholar
  6. 6.
    K. Li and P. Sheng: “Plane Stress Model for Fracture of Ceramics during Laser Cutting,” Int. J. Mach. Tools Manuf., 1995, 35(11), pp. 1493–506.CrossRefGoogle Scholar
  7. 7.
    M.F. Modest: “Transient Elastic Thermal Stress Development during Laser Scribing of Ceramics,” J. Heat Transf., 2001, 123(1), pp. 171–77.CrossRefGoogle Scholar
  8. 8.
    W. Hunter and J.R. Kuttler: “Enthalpy Method for Ablation-Type Moving Boundary Problems,” J. Thermophys., 1991, 5(2), pp. 240–42.CrossRefGoogle Scholar
  9. 9.
    R. Prasannavenkatesan, B.Q. Li, D.P. Field, and H. Weiland: “A Finite Element Model for Crystal Plasticity during Large Deformation and Comparison with Experimental Measurements,” Hot Deformation of Al Alloys, Z. Jin and Boubaux, ed., TMS Annual Meeting (San Diego, CA), March 2003, pp. 275–84.Google Scholar
  10. 10.
    K.J. Bathe: Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ, 1995.Google Scholar
  11. 11.
    D. Logan: First Course in Finite Element Analysis, Brooks/Cole, New York, NY, 2002.Google Scholar
  12. 12.
    S.P. Song and B.Q. Li: “Oscillation of Melt Drops in Magnetic Fields,” Int. J. Magnetohydrodynamics, 2001, 37, pp. 62–70.Google Scholar
  13. 13.
    N. Govanaju and B.Q. Li: “A Macro/Micro Model for Magnetic Stirring and Microstructure Formation during Solidification,” J. Energy Cons. Managmt., 2000, 43, pp. 335–44.Google Scholar
  14. 14.
    R. Akarapu: “Finite Element Simulation of Electromagnetic and Thermomechanical Phenomena during Laser and Microwave Processing,” Master’s Thesis, Washington State University, Pullman, WA, 2003.Google Scholar
  15. 15.
    R. Akarapu, B.Q. Li, and A.E. Segall: “A 3-D Numerical Model for Ablation Phenomena and Thermal Stress Evolution during Laser Machining,” HT2003-40298, Proceedings of ASME Summer Heat Transfer Conference, Las Vegas, NV, American Society of Mechanical Engineers, 2003.Google Scholar
  16. 16.
    A. E. Segall, D. Young, R. Akarapu, and B.Q. Li: “Application of Finite element Based Ablation Methods to the Study of Dual-Beam Laser Machining of Ceramics,” Proceedings of the 2003 NSF Grantees Conference, Birmingham, AL, National Science Foundation, 2003.Google Scholar
  17. 17.
    H.E. Daniels: “The Statistical Theory of the Strength of Bundle of Threads,” Proc. R. Soc. (London) A., 1945, 18, pp. 405–35.CrossRefGoogle Scholar
  18. 18.
    S.S. Pai and J.P. Gyekenyesi: “Calculation of the Weibull Strength Parameters and Batdrof Flaw Density Constants for Volume and Surface-Flaw-Induced Fracture in Ceramics,” NASA-TM 100890, National Aeronautics and Space Administration, 1988.Google Scholar
  19. 19.
    W. Weibull: “A Statistical Theory of Strength of Materials,” Ing. Vetemskaps Akadem. Handlinger, 1939, 4, p. 151 (in German).Google Scholar
  20. 20.
    W. Weibull: “The Phenomena of Rupture in Solids,” Ing. Vetemskaps Akadem. Handlinger, 1939, 4, p. 153 (in German).Google Scholar
  21. 21.
    N.N. Nemeth: “Ceramics Analysis and Reliability Evaluation of Structures (CARES),” NASA Technical Paper 2916, National Aeronautics and Space Administration, 1990.Google Scholar
  22. 22.
    A.E. Segall, J.R. Hellmann, and R. E. Tressler: “A Comprehensive Thermal Shock and Fatigue Methodology for Ceramics in Energy Applications,” Proceedings of the Second International Conference on Ceramics in Energy Applications, ASME, London, U.K., April 20–21, 1994.Google Scholar
  23. 23.
    D.R.J. Owen and E. Hinton: Finite Elements in Plasticity, Pineridge Press, Swansea, U.K., 1980.Google Scholar
  24. 24.
    J.N. Reddy: Introduction to Finite Element Method, McGraw-Hill Co., New York, NY, 1993.Google Scholar

Selected References

  1. •.
    R.L. Barnet: “Fracture of Brittle Materials under Transient Mechanical and Thermal Loading,” AFFDL-TR 66-220, 1967.Google Scholar
  2. •.
    A.M. Freudenthal: “Statistical Approach to Brittle Fracture,” Fracture, Adv. Treatise, 1968, 2, pp. 510–15.Google Scholar
  3. •.
    K. Li and B.Q. Li: “Numerical Analyses of G-Jitter Induced Convection and Solidification in Magnetic Fields,” J. Thermophys. Heat Trans., 2003, pp. 199–209.Google Scholar
  4. •.
    B.Q. Li and S.P. Song: “A Hybrid Boundary/Finite Element Method for Simulating Viscous Flows and Shapes of Droplets in Electric Fields,” Int. J. Comp. Fluid Dynamics, 2001, 15, pp. 293–308.CrossRefGoogle Scholar
  5. •.
    P.G. Tracy: “On Statistical Nature of Fracture,” Int. J. Fract., 1982, 18(4), pp. 253–77.Google Scholar
  6. •.
    V.R. Vedula, D.J. Green, J.R. Hellmann, and A.E. Segall: “Test Methodology for the Thermal Shock Characterization of Ceramics,” J. Mater. Sci., 1999, 33, pp. 5427–32.CrossRefGoogle Scholar
  7. •.
    O.C. Zienkiewicz and R.L. Taylor: The Finite Element Method, McGraw-Hill, New York, NY, 1994.Google Scholar

Copyright information

© ASM International 2004

Authors and Affiliations

  • R. Akarapu
    • 1
  • B. Q. Li
    • 1
  • A. Segall
    • 2
  1. 1.School of Mechanical and Materials EngineeringWashington State UniversityPullman
  2. 2.Engineering Science and MechanicsThe Pennsylvania State UniversityUniversity Park

Personalised recommendations