Abstract
A novel layer deletion method is used to experimentally investigate the effect of induced shielding current transmission (ISCT) in the longitudinal direction on the levitation force of a single-domain YBa2Cu3O7−x (YBCO) cylindrical superconductor (ϕ30×7 mm). In the experiment the sample was gradually sliced into two equal sheets, at the middle height along a diameter with 5 mm every step. The experimental results show that the levitation force is closely related with the ISCT in the longitudinal direction. Any layer deletion, even a small piece of layer deletion can reduce the levitation force of the sample. After the whole layer was deleted the levitation force can diminish about 50%. It is also found that the levitation force is directly proportional to the effective factor of surface area, which is equal to the top surface area divided by the total surface area parallel to the top surface of the sample.
Similar content being viewed by others
References
Murakumi, M., Melt processing of high-temperature superconductors, Progress in Materials Science, 1994, 38: 311–357.
Ullrich, M., Walter, H., Leenders, A. et al., Batch production of high quality customized shaped monolithic HTSC. Physica C, 1999, 311: 86–92.
Shi, D. L., Qu, D., Sagar, S. et al., Domain-orientation dependence of levitation force in seeded melt grown single-domain YBa2Cu3O x Appl. Phys. Lett., 1997, 70(26): 3606–3608.
Henning, W., Parks, D., Weistein, R. et al. Stable magnetic levitation with adjustable ratio of levitation force to restoring force using rings of zero-field cooled YBa2Cu3O y samples, Supercond. Sci. Technol., 2000, 3: 447–1449.
Kim, C. J., Kim, H. J., Joo, J. H., et al., Effects of the seed distance on the characteristics of the (100)/(100) junctions of top-seeded melt growth processed YBCO superconductors using two seeds. Physica C, 2000, 336: 23–238.
Kaiser, A. W., Adam, M., Bornemann, H. J., Characterization and properties of batch-processed melt-textured YBCO, Supercond. Sci. Technol., 1998, 11: 26–29.
Wu, M., Strasser, T., Littzkendorf, D. et al., Preparation of MTG Y(Ho)BCO large bulk samples with Y2O3 excess for cryomagnetic applications, Physica C, 1998, 282–287: 2645–2646.
Endon, A., Chauhan, H. S., Egi, T. et al., Macrosegregation of Y2Ba1Cu1O5 particles in Y1Ba2Cu3O7−d crystals grown by an undercooling method, J. Mater. Res., 1996, 11: 795–803.
Yang, W. M., Zhou, L., Feng, Y. et al., The effect of excess Y2O3 addition on the levitation force of melt processed YBCO bulk superconductors, Physica C, 1998, 305: 269–274.
Hull, J. R., Hilton, E. F., Mulcahy, T. M. et al., Low friction in mixed-mu superconducting bearings, J. Appl. Phys., 1995, 78: 6833–6838.
Weinberger, B., Lynds, R. L., Hull, J. R. et al. Low friction in high temperature superconductor bearings, Appl. Phys. Lett., 1991, 59: 1132–1134.
Hull, J. R., Superconducting bearings, Supercond. Sci. Technol., 2000, 13: R1-R15.
Hull, J. R., Mulcahy, T. M., Uherka, K. L. et al., Flywheel energy storage using superconducting magnetic bearing. Appl. Supercond., 1994, 2: 449–455.
Leender, A., Ullrich, M., Freyhardt, H. C. et al., Fabrication of HTS monoliths for a bearing system in cryogenics vessel, IEEE Trans. Appl. Supercond., 1999, 9: 992–995.
Ohashi, S., Tamura, S., Hirane, Y., Levitation characteristics of HTSC-permanent magnet hybrid flywheel system. IEEE Trans. Appl. Supercond., 1999, 9(2): 988–991.
Miyagawa, Y., Kameno, H., Takahata, R., et al., A 0.5 kWh flywheel energy storage system using a high Tc superconducting magnetic bearing, IEEE Trans. Appl. Supercond., 1999, 9(2): 996–999.
Coombs, T. A., Campbell, A. M., Ganney, I. et al. Superconducting bearings in flywheels, Matr. Sci. Eng. B, 1998, 53: 225–258.
Ren Zhongyou, Wang Jiasu, Wang Suyu et al., A hybrid maglev vehicle using permanent magnets and high temperature superconductor bulks, Physica C, 2002, 378–381: 873–876.
Yang, W. M., Zhou, L., Feng, Y., et al., A small maglev Car model using YBCO bulk superconductors, Proceedings of the Maglev'2000, in Rio de Janeiro, 2000, 107–111.
Kovalev, L. K., Ilushin, K. V., Koneev, S. M. A. et al., Hysteresis and reluctance electric machines with bulk HTS rotor elements, IEEE Trans. On Appl. Supercond., 1999, 9(2): 1261–1264.
Weh, H., Future steps in developing H-Tc SC bulk material levitation technique for transportation systems, Proceedings of MT-15, 15th International Conference on Magnet Technology, 1998, 883–889.
Wang, J., Yanoviak, M. M., Raj, R., Type II magnetic levitation on sinter-forged YBa2Cu3O x superconductor, J. Am. Ceram. Soc., 1989, 72(5): 846–848.
Shi, D. L., Lahiri, K., Qu, D. et al. Surface nucleation, domain growth mechanisms, and factors dominating superconducting properties in seed melt grown YBa2Cu3O x J. Mater. Res., 1997, 12(11): 3036–3045.
Teshima, H., Morita, M., Hashimoto, M., Comparison of the levitation forces of melt-processed YBaCuO superconductors for different magnets. Physica C, 1996, 269: 15–21.
Yang, W. M., Zhou, L., Feng, Y. et al., The effect of magnetic field distribution on the levitation force of single domain YBCO bulk superconductors. Advances in Cryogenic Engineering, 1999, 46(A): 663–667.
Yang, W. M., Zhou, L., Feng, Y. et al., The effect of magnet configurations on the levitation on the levitation force of melt processed YBCO bulk superconductors, Physica C, 2001, 354: 5–12.
Tent, B. A., Qu, D., Shi, D. et al., Angle dependence of magnetization in a single-domain YBa2Cu3O x sphere, Phys. Rev. B, 1998, 58: 11761–11767.
Yang, W. M., Zhou, L., Feng, Y. et al., The grain-alignment and its effect on the levitation force of melt processed YBCO single-domained bulk superconductors, Physica C, 307(1998): 271–276.
Yang, W. M., Zhou, L., Feng, Y. et al., The effect of the grain alignment on the levitation force in single domain YBa2Cu3O y bulk superconductors. Physica C, 1999, 319: 164–168.
Murakami, M., Oyama, T., Fujimoto, H. et al., Large levitation force due to flux pinning in YBaCuO superconductors fabricated by melt-powder-melt-growth process, Jpn. J. Appl. Phys., 1990, Pt. 2, 29: L1991-L1994.
Hellman, F., Gyorgy, E. M., Johnson, D. W., Jr., et al., Levitation of a magnet over a flat type II superconductor, J. Appl. Phys., 1988, 63(2): 447–450.
Yang, W. M., Zhou, L., Feng, Y. et al., Effect of perimeters of induced shielding current loops on levitation force in melt grown single-domain YBa2Cu3O x bulk, Appl. Phys. Lett., 2001, 79(13):2043–2045.
Yang, W. M., Zhou, L., Feng, Y. et al., The effect of excess barium oxide addition on the properties of Nd1Ba2Cu3O y by the melt-growth process, Physica C 2000, 337: 115–120.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, W., Zhou, L., Feng, Y. et al. Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa2Cu3O7−x cylindrical superconductor. Sci China Ser G: Phy & Ast 47, 146–153 (2004). https://doi.org/10.1360/03yw0079
Received:
Issue Date:
DOI: https://doi.org/10.1360/03yw0079