Abstract
Under the assumption that the corrosion at the end of steel bolt or steel bar is shaped like the contour line of ellipsoid, a mathematic model and formulas of calculating the thickness of corrosion layer at arbitrary point are presented in this paper. Then regarding the arbitrary points of 3D corrosion layer as patch element model of fictitious displacement discontinuity, we propose the basic solution of 3D problem of the patch element acting on discontinuous displacement. With three basic assumptions of the corrosion layer, we set up the 3D numerical discreted model, and derive the stress boundary equation for fictitious corrosion layer of 3D numerical analysis. We also make the numerical stimulating calculation, of the shotcrete structure at some lane using 3D finite element method. The results show that this method is effective and reasonable.
Similar content being viewed by others
References
Li Yonghe, Ge Xiurun, Evaluative analysis for corrosion quantity of steel bolt in shotcrete-bolt structure, Journal of Chinese Coal Society (in Chinese), 1998, 23(1): 48–52.
Li Yonghe, Formulas and analysis for corrosion quantity before the concrete protection layer opens crack, Journal of Xi’an Highway University (in Chinese), 1997(4): 25–30.
Li Yonghe, Carbonation fracture damage and durability of underground reinforced concrete and shot concrete bolt structure, PH. D Dissertation, Wuhan: Wuhan Geotechnical Engineering Institute of Rock & Soil Mechanics, the Chinese Academy of Sciences, 1999: 30–68.
Liu, Xila, Miao Pengke, Calculation for reinforcement corrosion and durability of concrete structure, J. Civil Engineering (in Chinese), 1990, 23(4): 69–78.
Qiu Wenjun, Zhang Yu, Definition of reinforcement corrosion quantity when concrete expands and cracks, ‘Annual Report on Reinforcement Corrosion Prediction Model’ on the Important Fundamental Research for Security and Durability of Civil Engineering and Water Conservancy Engineering in National Principal Plan, 1996, 1–13.
Hui Yulin, Evaluation of steel corrosion durability of concrete structure and service life prediction method, Industrial Building, 1997, 27(6): 19–22.
Wang Xianming, Zhao Hongyan, Prediction of residual service life of R.C. structure in universal atmosphere, condition, 1996, 17(3): 58–62.
Li Yonghe, Ge Xiuru, Model and reliability analysis for carbonation damage of shotcrete-bolt structure, in Pro. of 9th Inter. Con. on Computer Methods and Advances in Geomechanics, Wuhan: Institute of Rock and Soil Mechanics, 1997, 621–626.
Li Yonghe, Changing carbonation models of shotcrete-bolt structure along with time, in Pro. of the 7th Inter. Con. on EPMESC, Guangzhou: The South China University of Technology, 1997: 835–841.
Crouch, S. L., Starfield, A. M., Boundary element methods in solid mechanics, London: George Allen & Unwin, 1983, 85–90.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Y., Ge, X. Model and numerical analysis of 3D corrosion layer of reinforced concrete structure. Sci. China Ser. E-Technol. Sci. 46, 82–92 (2003). https://doi.org/10.1360/03ye9008
Received:
Issue Date:
DOI: https://doi.org/10.1360/03ye9008