Abstract
In the present study, acid-modified attapulgite was used, as an adsorbent, to remove as much Cd2+ as possible from aqueous solution. Static adsorption experiments using powdered acid-modified attapulgite, and dynamic adsorption using granular acid-modifed attapulgite, were conducted to explore the practical application of modified attapulgite in the adsorption of Cd2+. The modified attapulgite had a larger specific surface area and thinner fibrous crystals than the unmodified version. No obvious differences were noted, in terms of the crystal structure, between the natural attapulgite and the modified version. The effects of initial concentration, pH, contact time, and ionic strength on the adsorption of Cd2+ were investigated, and the results showed that the adsorption capacity of the modified attapulgite was increased with increasing pH and the initial Cd2+ concentration. The adsorption properties were analyzed by means of dynamic adsorption tests with respect to various Cd2+ concentrations and flow rates. The maximum adsorption capacity of 8.83 mg/g occurred at a flow rate of 1 mL/min and at an initial concentration of 75 mg/L. Because there was better accord between the data and a pseudo-second order model than a pseudo-first-order model, external mass transfer is suggested to be the rate-controlling process. The experimental data were also fitted for the intraparticle diffusion model, implying that the intraparticle diffusion of Cd2+ onto the modified attapulgite was also important for controlling the adsorption process. The Bohart-Adams model was more suitable than the Thomas model for describing the dynamic behavior with respect to the flow rate and the initial Cd2+ concentration. This research provided the theoretical basis for the dynamic adsorption of Cd2+ on the modified attapulgite. Compared to the powdered modified attapulgite, the dynamic adsorption by granular modified attapulgite appeared more favorable in terms of practical application.
Similar content being viewed by others
References
Aiban, S.A. (2006) Compressibility and swelling characteristics of Al-Khobar palygorskite, eastern Saudi Arabia. Engineering Geology, 87, 205–219.
Aksu, Z. and Gönen, F. (2004) Biosorption of phenol by immobilized activated sludge in a continuous packed bed: prediction of breakthrough curves. Process Biochemistry, 39, 599–613.
Akyuz, S., Akyuz, T., and Davies, J.E.D. (1994) Adsorption of 2,2’-bipyridyl onto sepiolite, attapulgite and smectite group clay-minerals from Anatolia — the FT-IR and FT-Raman spectra of surface and intercalated species. Journal of Inclusion Phenomena and Molecular Recognition in Chemistry, 18, 123–135.
Alvarez, M., Horst, M.F., Sileo, E.E., and Rueda, E.H. (2012) Effect of Cd(II) on the ripening of ferrihydrite in alkaline media. Clays and Clay Minerals, 60, 99–107.
Aly, A. and Koji, W. (1981) Adsorption of lead, copper, zinc, cobalt, and cadmium by soils that differ in cation-exchange materials. Journal of Soil Science, 32, 271–283.
Bhargavi, R., Kadirvelu, K., and Kumar, N.S. (2013) Static and dynamic adsorption of phenol from aqueous solution using spherical carbon. Carbon Materials 2012 (CCM12): Carbon Materials for Energy Harvesting, Environment, Nanoscience and Technology, 1538, 78–88.
Bohart, G.S. and Adams, E.Q. (1920) Some aspects of the behavior of charcoal with respect to chlorine. Journal of the American Chemical Society, 42, 523–544.
Borba, C.E., da Silva, E.A., Fagundes-Klen, M.R., Kroumov, A.D., and Guirardello, R. (2008) Prediction of the copper (II) ions dynamic removal from a medium by using mathematical models with analytical solution. Journal of Hazardous Materials, 152, 366–372.
Cao, C.Y., Qu, J., Wei, F., Liu, H., and Song W.G. (2012) Superb adsorption capacity and mechanism of flower-like magnesium oxide nanostructures for lead and cadmium ions. ACS Applied Materials & Interfaces, 4, 4283–4287.
Chen, H. and Wang, A.Q. (2009) Adsorption characteristics of Cu(II) from aqueous solution onto poly(acrylamide)/attapulgite composite. Journal of Hazardous Materials, 165, 223–231.
Chen, J.H., Li, G.P., Liu, Q.L., Ni, J.C., Wu, W.B., and Lin, J.M. (2010) Cr(III) ionic imprinted polyvinyl alcohol/sodium alginate (PVA/SA) porous composite membranes for selective adsorption of Cr(III) ions. Chemical Engineering Journal, 165, 465–473.
Chen, Z.G., Chen, F., Li, X.Z., Lu, X.W., Ni, C.Y., and Zhao, X.B. (2010) Facile synthesis of CeO2 nanotubes templated by modified attapulgite. Journal of Rare Earths, 28, 566–570.
Chowdhury, S., Chakraborty, S., and Saha, P.D. (2013) Response surface optimization of a dynamic dye adsorption process: a case study of crystal violet adsorption onto NaOH-modified rice husk. Environmental Science and Pollution Research International, 20, 1698–1705.
Ding, C.L. and Shang, C.I. (2010) Mechanisms controlling adsorption of natural organic matter on surfactant-modified iron oxide-coated sand. Water Research, 44, 3651–3658.
Falayi, T. and Ntuli, F. (2013) Removal of heavy metals and neutralisation of acid mine drainage with un-activated attapulgite. Journal of Industrial and Engineering Chemistry, 20, 1285–1292.
Fan, H.M., He, S.H., Gu, Z.P., Zhou, Y., and Si, J.W. (2009) Adsorption of Cd2+ in aqueous solution by natural attapulgite. Water Sciences and Engineering Technology, 2, 30–32.
Frini-Srasra, N. and Srasra, E. (2010) Acid treatment of south Tunisian palygorskite: Removal of Cd(II) from aqueous and phosphoric acid solutions. Desalination, 250, 26–34.
Guerra, D.L., Silva, E.M., and Airoldi, C. (2010) Application of modified attapulgites as adsorbents for uranyl uptake from aqueous solution - thermodynamic approach. Process Safety and Environmental Protection, 88, 53–61.
Haden, W.L. and Schwint, I.A. (1967) Attapulgite — its properties and applications. Industrial and Engineering Chemistry, 59, 58–69.
He, Z.Y., Nie, H.L., Branford-White, C., Zhu, L.M., Zhou, Y.T., and Zheng, Y. (2008) Removal of Cd2+ from aqueous solution by adsorption onto a novel activated nylon-based membrane. Bioresource Technology, 99, 7954–7958.
Hasan, S.H., Ranjan, D., and Talat, M. (2010) Agro-industrial waste ‘wheat bran’ for the biosorptive remediation of selenium through continuous up-flow fixed-bed column. Journal of Hazardous Materials, 181, 1134–1142.
Huang, Y., Wang, H.L., and Gong, S.D. (2011) Sorption behavior of hydroxyapatite for 109Cd(II) as a function of environmental conditions. Journal of Radioanalytical and Nuclear Chemistry, 292, 545–553.
Inglezakis, V.J., Stylianous, M.A., Gkantzou, D., and Loizidou, M.D. (2007) Removal of Pb(II) from aqueous solutions by using clinoptilolite and bentonite as adsorbents. Desalination, 210, 248–256.
John, M.K. (1972) Cadmium adsorption maxima of soils as measured by the Langmuir isotherm. Canadian Journal of Soil Science, 52, 343–350.
Lian, L.L., Guo, L.P., and Guo, C.J. (2009) Adsorption of Congo red from aqueous solutions onto Ca-bentonite. Journal of Hazardous Materials, 161, 126–131.
Liu, Z.N. and Liu, Y. (2014) Structure and properties of forming adsorbents prepared from different particle sizes of coal fly ash. Chinese Journal of Chemical Engineering, in press.
Lin, J.W., Zhan, Y.H., Zhu, Z.L., and Xing, Y.Q. (2011) Adsorption of tannic acid from aqueous solution onto surfactant-modified zeolite. Journal of Hazardous Materials, 193, 102–111.
Liu, P. and Wang, T.M. (2007) Adsorption properties of hyperbranched aliphatic polyester grafted attapulgite towards heavy metal ions. Journal of Hazardous Materials, 149, 75–79.
Ma, J.F., Cui, B.Y., Dai, J., and Li, D.L. (2011) Mechanism of adsorption of anionic dye from aqueous solutions onto organobentonite. Journal of Hazardous Materials, 186, 1758–1765.
Ngah, W.S.W and Fatinathan, S. (2008) Adsorption of Cu(II) ions in aqueous solution using chitosan beads, chitosan-GLA beads and chitosan-alginate beads. Chemical Engineering Journal, 143, 62–72.
Pehlivan, E., Yanik, B.H., Ahmetli, G., and Pehlivan, M. (2008) Equilibrium isotherm studies for the uptake of cadmium and lead ions onto sugar beet pulp. Bioresource Technology, 99, 3520–3527.
Peng, S.C., Huang, C.H., Chen, T.H., Feng, Y.L., and Wang S.S. (2004) Study of the properties of adsorption of C23+ on attapulgite activated with hydrochloric acid. Journal of Hefei University of Technology, 27, 611–614.
Pokhrel, D. and Viraraghavan, T. (2008) Arsenic removal in an iron oxide coated fungal biomass column: Analysis of breakthrough curves. Bioresource Technology, 99, 2067–2071.
Pan, B.C., Meng, F.W., Chen, X.Q., Pan, B.J., Li, X.T., Zhang, W.M., Zhang, X., Chen, J.L., Zhang, Q.X., and Sun, Y. (2005) Application of an effective method in predicting breakthrough curves of fixed bed adsorption on to resin adsorbent. Journal of Hazardous Materials, 124, 74–80.
Qi, Z.G., Shi, G.F., and Bai, L.M. (2007) Study on adsorption of phenol in wastewater by microwave modified attapulgite clay. Non-Metallic Mines, 30, 56–59.
Saglam, H., Ozdemir, O., Celik, M.S., and EI-Shall, H. (2000) Adsorption mechanism of toxic metal ions by attapulgite. Mineral processing on the verge of the 21st century, 673–678.
Salehi, E., Madaeni, S.S., and Heidary, F. (2012) Dynamic adsorption of Ni(II) and Cd(II) ions from water using 8-hydroxyquinoline ligand immobilized PVDF membrane: Isotherms, thermodynamics and kinetics. Separation and Purification Technology, 94, 1–8.
Singh, K.P., Gupta, S., Singh, A.K., and Sinha, S. (2011) Optimizing adsorption of crystal violet dye from water by magnetic nanocomposite using response surface modeling approach. Journal of Hazardous Materials, 186, 1462–1473.
Suárez Barrios, M., Flores Gonzalez, L.V., Vicente Rodriguez, M.A., and Martin Pozas, J.M. (1995) Acid activation of a palygorskite with HCl: Development of physico-chemical, textural and surface properties. Applied Clay Science, 10, 247–258.
Thomas, H.C. (1944) Heterogeneous ion exchange in a flowing system. Journal of the American Chemical Society, 66, 1664–1666.
Uddin, M.T., Rukanuzzaman, M., Khan, M.M., and Islam, M.A. (2009) Adsorption of methylene blue from aqueous solution by jackfruit (Artocarpus heteropyllus) leaf powder: A fixed-bed column study. Journal of Environmental Management, 90, 3443–3450.
Wang, X.H. and Wang, A.Q. (2010) Removal of Cd(II) from aqueous solution by a composite hydrogel based on attapulgite. Environmental Technology, 31, 745–753.
Wang, X.H., Zheng, Y., and Wang, A.Q. (2009) Fast removal of copper ions from aqueous solution by chitosan-gpoly( acrylic acid)/attapulgite composites. Journal of Hazardous Materials, 168, 970–977.
Wang, Y., Mu, Y., Zhao, Q.B., and Yu, H.Q. (2006) Isotherms, kinetics and thermodynamics of dye biosorption by anaerobic sludge. Separation and Purification Technology, 50, 1–7.
Wu, N.M. and Zheng, K.L. (2013) Synthesis and characterization of poly(HEA MALA) hydrogel and its application in removal of heavy metal ions from water. Chemical Engineering Journal, 215–216, 894–902.
Xi, Y., Mallavarapu, M., and Naidu, R. (2010) Adsorption of the herbicide 2,4-D on organo-palygorskite. Applied Clay Science, 49, 255–261.
Xiao, K., Wang, X.M., Huang, X., Waite, T.D., and Wen, X. (2009) Analysis of polysaccharide, protein and humic acid retention by microfiltration membranes using Thomas’ dynamic adsorption model. Journal of Membrane Science, 342, 22–34.
Zhang, J.M., Peng, S., and Chen, J.J. (2012) Sorption of 2, 4-dichlorophenol in soil and comparison of partition coefficients obtained by batch and column experiments. Chinese Journal of Environmental Engineering, 6, 4251–4256.
Zou, X.H., Pan, J.M., Ou, H.X., Wang, X., Guan, W., Li, C.X., Yan, Y.S., and Duan, Y.Q. (2011) Adsorptive removal of Cr(III) and Fe(III) from aqueous solution by chitosan/attapulgite composites: Equilibrium, thermodynamics and kinetics. Chemical Engineering Journal, 167, 112–121.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guo, N., Wang, JS., Li, J. et al. Dynamic Adsorption of Cd2+ Onto Acid-Modified Attapulgite From Aqueous Solution. Clays Clay Miner. 62, 415–424 (2014). https://doi.org/10.1346/CCMN.2014.0620505
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1346/CCMN.2014.0620505