Advertisement

Clays and Clay Minerals

, Volume 66, Issue 3, pp 233–244 | Cite as

Isothermal Crystallization Properties and Improved Rheological Performance of Waxy Crude Oil using Polyoctadecylacrylate-Modified Montmorillonite Composite as a Pour Point Depressant

  • Bo Yao
  • Chuanxian Li
  • Fei YangEmail author
  • Guangyu Sun
Article

Abstract

Recently, studies on the use of polymer nanomaterial composites as pour-point depressants (PPD) have drawn much attention, but the crystallization properties and improved rheological performance of waxy crude oils using nanoclay-based composite PPDs have rarely been reported. In this paper, montmorillonite (Mnt) was first organically modified using octadecyltrimethylammonium chloride (C21H46NCl, or stearyltrimethylammonium chloride) in aqueous solution. Then, the organically modified Mnt (OMnt) material was dispersed into a polyoctadecylacrylate (POA) matrix to prepare a POA/OMnt composite PPD by melt blending. The composition, structure, and morphology of Mnt, OMnt, and the POA/OMnt composite PPDs were investigated. The results showed that the OMnt and POA were compatible and that the OMnt was exfoliated into several sheets in the POA matrix. Subsequently, the isothermal crystallization kinetics of the POA/OMnt composite PPDs showed that small amounts of OMnt had a dramatic impact on POA chain motion during crystallization and facilitated POA crystallization. After it was added to a waxy crude oil, the POA/OMnt composite PPDs produced better rheological properties and performance than identical concentrations of the neat POA. The POA/OMnt composite PPDs can act as wax nucleation sites for wax molecule precipitation and result in larger and more compact wax crystal flocs, which adversely affect the formation of a wax crystal network and, thus, favor the improvement of waxy crude oil rheology.

Key Words

Isothermal Crystallization Kinetics Nanocomposite Pour Point Depressant Organically Modified Montmorillonite Waxy Crude Oil 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Al-Sabagh, A.M., Betiha, M.A., Osman, D.I., Hashim, A.I., El-Sukkary, M.M., and Mahmoud, T. (2016) A new covalent strategy for functionalized montmorillonite—poly (methyl methacrylate) for improving the flowability of crude oil. RSC Advances, 6, 109460–109472.CrossRefGoogle Scholar
  2. Avrami, M. (1940) Kinetics of phase change. I I Transformation-time relations for random distribution of nuclei. The Journal of Chemical Physics, 8, 212–224.Google Scholar
  3. Chen, Q., Zhu, R., Ma, L., Zhou, Q., Zhu, J., and He, H. (2017) Influence of interlayer species on the thermal characteristics of montmorillonite. Applied Clay Science, 135, 129–135.CrossRefGoogle Scholar
  4. He, H., Ding, Z., Zhu, J., Yuan, P., Xi, Y., Yang, D., and Frost, R.L. (2005) Thermal characterization of surfactant-modified montmorillonites. Clays and Clay Minerals, 53, 287–293.CrossRefGoogle Scholar
  5. Khajehpour, M., Gelves, G.A., and Sundaraj, U. (2015) Modification of montmorillonite with alkyl silanes and fluorosurfactant for clay/fluoroelastomer (FKM) nanocomposites. Clays and Clay Minerals, 63, 1–14.CrossRefGoogle Scholar
  6. Lashkarbolooki, M., Seyfaee, A., Esmaeilzadeh, F., and Mowla, D. (2010) Experimental investigation of wax deposition in Kermanshah crude oil through a monitored flow loop apparatus. Energy & Fuels, 24, 1234–1241.CrossRefGoogle Scholar
  7. Li, L., Bellan, L.M., Craighead, H.G., and Frey, M.W. (2006). Formation and properties of nylon-6 and nylon-6/montmorillonite composite nanofibers. Polymer, 247, 6208–6217.CrossRefGoogle Scholar
  8. Liu, C.P., Song, W.F., Lu, Q.X., and Chen, M.F. (2014) Comparison of isothermal with nonisothermal kinetics for ethylene-vinyl acetate cross-linking reaction in the solid state. Industrial & Engineering Chemistry Research, 53, 10080–10089.CrossRefGoogle Scholar
  9. Oliveira, L.M., Nunes, R.C., Melo, I.C., Ribeiro, Y.L., Reis, L.G., Dias, J.C., Guimarães, R.C.L., and Lucas, E.F. (2016) Evaluation of the correlation between wax type and structure/behavior of the pour point depressant. Fuel Processing Technology, 149, 268–274.CrossRefGoogle Scholar
  10. Page, K.A. and Adachi, K. (2006) Dielectric relaxation in montmorillonite/polymer nanocomposites. Polymer, 47, 6406–6413.CrossRefGoogle Scholar
  11. Sadek, E.M., El-Nashar, D.E., and Ahmed, S.M. (2015) Effect of organoclay reinforcement on the curing characteristics and technological properties of styrene-butadiene rubber. Polymer Composites, 36, 1293–1302.CrossRefGoogle Scholar
  12. Shi, N. and Dou, Q. (2015) Non-isothermal cold crystallization kinetics of poly (lactic acid)/poly (butylene adipate-coterephthalate)/treated calcium carbonate composites. Journal of Thermal Analysis and Calorimetry, 119, 635–642.CrossRefGoogle Scholar
  13. Shirdel Ghadikolaei, S., Omrani, A., and Ehsani, M. (2016) Impact of bacterial cellulose nanofibers on the nonisothermal crystallization kinetics of ethylene-vinyl acetate copolymer. Industrial & Engineering Chemistry Research, 55, 8248–8257.CrossRefGoogle Scholar
  14. Wang, H.R., Gao, Y.L., Ye, Y.F., Min, G.H., Chen, Y., and Teng, X.Y. (2003) Crystallization kinetics of an amorphous Zr-Cu-Ni alloy: Calculation of the activation energy. Journal of Alloys and Compounds, 353, 200–206.CrossRefGoogle Scholar
  15. Xu, J., Jiang, H., Li, T., Wei, X., Wang, T., Huang, J., Wang, W., Smith, A.L., Wang, J., Zhang, R., Xu, Y., Li, L., Prud’homme, R.K., and Guo, X. (2015) Effect of comb-type copolymers with various pendants on flow ability of heavy crude oil. Industrial & Engineering Chemistry Research, 54, 5204–5212.CrossRefGoogle Scholar
  16. Yang, F., Paso, K., Norrman, J., Li, C., Oschmann, H., and Sjoblom, J. (2015a) Hydrophilic nanoparticles facilitate wax inhibition. Energy & Fuels, 29, 1368–1374.CrossRefGoogle Scholar
  17. Yang, F., Yao, B., Li, C., Shi, X., Sun, G., and Ma, X. (2017a) Performance improvement of the ethylene-vinyl acetate copolymer (EVA) pour point depressant by small dosages of the polymethylsilsesquioxane (PMSQ) microsphere: An experimental study. Fuel, 207, 204–213.CrossRefGoogle Scholar
  18. Yang, F., Yao, B., Li, C., Sun, G., and Ma, X. (2017b) Oil dispersible polymethylsilsesquioxane (PMSQ) microspheres improve the flow behavior of waxy crude oil through spacial hindrance effect. Fuel, 199, 4–13.CrossRefGoogle Scholar
  19. Yang, F., Zhao, Y., Sjöblom, J., Li, C., and Paso, K.G. (2015b) Polymeric wax inhibitors and pour point depressants for waxy crude oils: A critical review. Journal of Dispersion Science and Technology, 36, 213–225.CrossRefGoogle Scholar
  20. Yao, B., Li, C., Yang, F., Mu, Z., Zhang, X., and Sun, G. (2017) Effect of oil dispersible polymethylsilsesquioxane microspheres on the formation and breakage of model waxy oil gels. Fuel, 209, 424–433.CrossRefGoogle Scholar
  21. Yao, B., Li, C., Yang, F., Sjöblom, J., Zhang, Y., Norrman, J., Paso, K., and Xiao, Z. (2016a) Organically modified nanoclay facilitates pour point depressing activity of polyoctadecylacrylate. Fuel, 166, 96–105.CrossRefGoogle Scholar
  22. Yao, B., Li, C., Yang, F., Zhang, X., Mu, Z., Sun, G., and Zhao, Y. (2018a) Ethylene-vinyl acetate copolymer (EVA) and resin-stabilized asphaltenes synergistically improve the flow behavior of model waxy oils: 1. Effect of wax content and the synergistic mechanism. Energy & Fuels, 32, 1567–1578, DOI:  https://doi.org/10.1021/acs.energyfuels.7b03657.Google Scholar
  23. Yao, B., Li, C., Yang, F., Zhang, Y., Xiao, Z., and Sun, G. (2016b) Structural properties of gelled Changqing waxy crude oil benefitted with nanocomposite pour point depressant. Fuel, 184, 544–554.CrossRefGoogle Scholar
  24. Yao, B., Li, C., Zhang, X., Yang, F., Sun, G., and Zhao, Y. (2018b) Performance improvement of the ethylene-vinyl acetate copolymer (EVA) pour point depressant by small dosage of the amino-functionalized polymethylsilsesquioxane (PAMSQ) microsphere, Fuel, 220, 167–176.CrossRefGoogle Scholar
  25. Yao, B., Wang, L., Yang, F., Li, C., and Zhao, Y. (2016c). Effect of vinyl-acetate moiety molar fraction on the performance of poly (octadecyl acrylate-vinyl acetate) pour point depressants: experiments and mesoscopic dynamics simulation. Energy & Fuels, 31, 448–457.CrossRefGoogle Scholar
  26. Yi, S. and Zhang, J. (2011). Shear-induced change in morphology of wax crystals and flow properties of waxy crudes modified with the pour-point depressant. Energy & Fuels, 25, 5660–5671.CrossRefGoogle Scholar

Copyright information

© Clay Minerals Society 2018

Authors and Affiliations

  • Bo Yao
    • 1
    • 2
  • Chuanxian Li
    • 1
    • 2
  • Fei Yang
    • 1
    • 2
    Email author
  • Guangyu Sun
    • 1
    • 2
  1. 1.College of Pipeline and Civil EngineeringChina University of PetroleumQingdao, ShandongChina
  2. 2.Shandong Provincial Key Laboratory of Oil & Gas Storage and Transportation SafetyQingdao, ShandongChina

Personalised recommendations