Skip to main content

Appropriate calibration curve fitting in ligand binding assays

Abstract

Calibration curves for ligand binding assays are generally characterized by a nonlinear relationship between the mean response and the analyte concentration. Typically, the response exhibits a sigmoidal relationship with concentration. The currently accepted reference model for these calibration curves is the 4-parameter logistic (4-PL) model, which optimizes accuracy and precision over the maximum usable calibration range. Incorporation of weighting into the model requires additional effort but generally results in improved calibration curve performance. For calibration curves with some asymmetry, introduction of a fifth parameter (5-PL) may further improve the goodness of fit of the experimental data to the algorithm. Alternative models should be used with caution and with knowledge of the accuracy and precision performance of the model across the entire calibration range, but particularly at upper and lower analyte concentration areas, where the 4-and 5-PL algorithms generally outperform alternative models. Several assay design parameters, such as placement of calibrator concentrations across the selected range and assay layout on multiwell plates, should be considered, to enable optimal application of the 4- or 5-PL model. The fit of the experimental data to the model should be evaluated by assessment of agreement of nominal and model-predicted data for calibrators.

This is a preview of subscription content, access via your institution.

References

  1. 2006 report, Medicines in development, biotechnology. PhRMA Website. 2006; Available at: http://www.phrma.org/files/Biotech%202006.pdf. Accessed January 14, 2007.

  2. Findlay JWA, Smith WC, Lee JW, et al. Validation of immunoassays for bioanalysis: a pharmaceutical industry perspective.J Pharm Biomed Anal. 2000;21:1249–1273.

    PubMed  Article  CAS  Google Scholar 

  3. DeSilva B, Smith W, Weiner R, et al. Recommendations for the bioanalytical method validation of ligand-binding assays to support pharmacokinetic assessments of macromolecules.Pharm Res. 2003;20:1885–1900.

    PubMed  Article  CAS  Google Scholar 

  4. Shah VP, Midha KK, Dighe S, et al. Analytical methods validation: bioavailability, bioequivalence and pharmacokinetic studies.Pharm Res. 1992;9:588–592.

    Article  Google Scholar 

  5. Miller KJ, Bowsher RR, Celniker A, et al. Workshop on bioanalytical methods validation for macromolecules: summary report.Pharm Res. 2001;18:1373–1383.

    PubMed  Article  CAS  Google Scholar 

  6. Shah VP, Midha KK, Findlay JWA, et al. Bioanalytical method validation—a revisit with a decade of progress.Pharm Res. 2000;17:1551–1557.

    PubMed  Article  CAS  Google Scholar 

  7. Vishwanathan CT Bansal S, Booth B, et al. Quantitative bioanalytical methods validation and implementation best practices for chromatographic and ligand binding assays.AAPS J [serial online]. 2007;9:E30-E42.

    Article  Google Scholar 

  8. Food and Drug Administration.Guidance for Industry: Bioanalytical. Method Validation. Rockville, MD: US Department of Health and Human Services, Food and Drug Administration, Center for Drug Evaluation and Research; 2001.

    Google Scholar 

  9. Rodbard D, Frazier GR. Statistical analysis of radioligand assay data.Methods Enzymol. 1975;37:3–22.

    PubMed  Google Scholar 

  10. Haven MC, Orsulak PJ, Arnold LL, et al. Data-reduction methods for immunoradiometric assays of thyrotropin compared.Clin Chem. 1987;33:1207–1210.

    PubMed  CAS  Google Scholar 

  11. Dudley RA, Edwards P, Ekins RP, et al. Guidelines for immunoassay data processing.Clin Chem. 1985;31:1264–1271.

    PubMed  CAS  Google Scholar 

  12. Gottschalk PG, Dunn JR. The five-parameter logistic: a characterization and comparison with the four-parameter logistic.Anal Biochem. 2005;343:54–65.

    PubMed  CAS  Article  Google Scholar 

  13. Box GEP, Hunter WG, Hunter JS, eds.Statistics for Experimenters. New York, NY: John Wiley & Sons: 1978.

    Google Scholar 

  14. Finney DJ, Phillips P. The form and estimation of a variance function, with particular reference to radioimmunoassay.Appl Stat. 1977;26:312–320.

    Article  Google Scholar 

  15. Finney DJ, ed.Statistical Methods in Biological Assay. 3rd ed. London, UK: Charles Griffith; 1978.

    Google Scholar 

  16. Carroll RJ, Ruppert D, eds.Transformation and Weighting in Regression. London, UK: Chapman Hall; 1988.

    Google Scholar 

  17. Rocke DM, Jones G. Optimal design for ELISA and other forms of immunoassay.Technometrics. 1997;39:162–170.

    Article  Google Scholar 

  18. Karpinski KF. Optimality assessment in the enzyme-linked immunosorbent assay (ELISA).Biometrics. 1990;46:381–390.

    PubMed  Article  CAS  Google Scholar 

  19. Singer R, Lansky DM, Hauck WW. Bioassay glossary.Pharmacopeial Forum. 2006;32:1359–1365.

    Google Scholar 

  20. Karnes HT, March C. Calibration and validation of linearity in chromatographic biopharmaceutical analysis.J Pharm Biomed Anal. 1991;9:911–918.

    PubMed  Article  CAS  Google Scholar 

  21. Smith WC, Sittampalam GS. Conceptual and statistical issues in the validation of analytic dilution assays for pharmaceutical applications.J Biopharm Stat. 1998;8:509–532.

    PubMed  Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to John W. A. Findlay.

Additional information

Published: June 29, 2007

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Findlay, J.W.A., Dillard, R.F. Appropriate calibration curve fitting in ligand binding assays. AAPS J 9, E260–E267 (2007). https://doi.org/10.1208/aapsj0902029

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1208/aapsj0902029

Keywords

  • Ligand-binding assay
  • nonlinear calibration
  • 4/5-parameter logistic models
  • assay design parameters