1 Erratum to: Nano Convergence (2017) 4:16 DOI 10.1186/s40580-017-0110-5
After publication of the original article [1], the authors noticed one error with the following sentence in “Conclusion” section:
-
“3.
The increment in yield strength due to precipitation strengthening in 1.65Cu steel is 158 MPa.”
“1.65Cu” should be corrected to “1.7Cu”.
The original article has been updated.
Reference
M.P. Phaniraj, Y.‑.M. Shin, W.‑.S. Jung, M.‑.H. Kim, I.‑.S. Choi, Understanding dual precipitation strengthening in ultra-high strength low carbon steel containing nano-sized copper precipitates and carbides. Nano Converg. 4, 16 (2017). doi:10.1186/s40580-017-0110-5
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Author information
Authors and Affiliations
Corresponding authors
Additional information
The online version of the original article can be found under doi:10.1186/s40580-017-0110-5.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Phaniraj, M.P., Shin, YM., Jung, WS. et al. Erratum to: Understanding dual precipitation strengthening in ultra-high strength low carbon steel containing nano-sized copper precipitates and carbides. Nano Convergence 4, 20 (2017). https://doi.org/10.1186/s40580-017-0114-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s40580-017-0114-1