Background
Enormous efforts have been made to develop circulation systems for physiological nutrient supply and waste removal of in vitro cultured tissues. These developments are aiming for in vitro generation of organ equivalents such as liver, lymph nodes and lung or even multi-organ systems for substance testing, research on organ regeneration or transplant manufacturing. Initially technical perfusion systems based on membranes, hollow fibers or networks of micro-channels were used for these purposes. However, none of the currently available systems ensures long-term homeostasis of the respective tissue over months. This is caused by a lack of in vivo-like vasculature which leads to continuous accumulation of protein sediments and cell debris in the systems. Here, we demonstrate a closed and self-contained circulation system emulating the natural blood perfusion environment of vertebrates at tissue level.
Material and methods
The Multi-Organ-Chip (MOC) device accommodates two microvascular circuits (Figure 1a). Each circuit is operated by a separate peristaltic on-chip micropump, modified from Wu and co-workers [1]. Microfluidic 3D channels were formed in PDMS by replica molding from master molds and were afterwards closed by bonding to a cover-slip by air plasma treatment. To retain PDMS hydrophilicity, channels were filled with culture medium immediately after sealing. To emulate the natural blood perfusion environment, human dermal microvascular endothelial cells (HDMEC) were used. The cells were seeded into the PDMS channels and adhered to all channel walls after subsequent static cultivation on each channel side. Afterwards cells were cultured up to 14 days in PDMS channels under pulsatile flow conditions.
Results
A miniaturized circulation system has been established over a period of 14 days by fully covering all channels and surfaces of the MOC with human microvascular endothelial cells. By injecting 2 × 107 cells ml-1 into the channels, a homogeneous distribution of cells throughout all channels was achieved (Figure 1b). During the following static incubation, cells adhered well to the air plasma treated channel walls. A peristaltic micro-pump was used to create culture medium circulation. After adaption to shear stress, HDMEC showed an elongation and alignment parallel to the flow direction. Three-dimensional reconstitutions of image stacks indicate that cells formed confluent monolayers on all walls of the channels (Figure 1c). During the whole cultivation time they maintained adherence to the channel walls and were positive for Calcein AM viability staining (Figure 1b). After 14 days of culture HDMEC forming the microvascular circuit were positive for ac-LDL uptake (Figure 1d) and expressed the endothelial-specific marker CD31 and von Willebrand Factor (vWF) (Figure 1e).
Conclusion
A robust procedure applying pulsatile shear stress has been established to cover all fluid contact surfaces of the system with a functional, tightly closed layer of HDMEC.
Long-term cultivation of elongated and flow-aligned HDMEC inside the chip-based microcirculation was demonstrated over a period of 14 days. For such endothelialized microfluidic devices to be useful for substance testing, it is essential to show long-term viability and function in the presence of physiological flow rates as shown here. These artificial vessels are an important approach for systemic substance testing in Multi-Organ-Chips. The miniaturized circulation system creates the conditions for circulation of nutrients through the organoid culture chamber, allows for in vivo-like crosstalk between endothelial cells and tissues and prevents clumping inside the channels. Compared with conventional cell culture techniques, a microfluidic-based cell culture may mimic more accurate in vivo-like extracellular conditions, as the culture of cells and organ models in perfused microfluidic systems can improve their oxygen and nutrient supply. This makes it suitable for long-term cultivation and more efficient drug studies. In future, such endothelialized bioreactors might be used for testing vasoactive substances. Finally, the described system can now be used for the establishment of organ-specific capillary networks. Here, we will adhere to our recently published roadmap toward vascularized ''human-on-a-chip'' models to generate systemic data fully replacing the animals or human beings currently used [2].
References
Wu M-H, Huang S-B, Cui Z, Cui Z, Lee G-B: A high throughput perfusion-based microbioreactor platform integrated with pneumatic micropumps for three-dimensional cell culture. Biomedical microdevices. 2008, 10: 309-319.
Marx U, Walles H, Hoffmann S, Lindner G, Horland R, Sonntag F, Klotzbach U, Sakharov D, Tonevitsky A, Lauster R: "Human-on-a-chip" developments: a translational cutting-edge alternative to systemic safety assessment and efficiency evaluation of substances in laboratory animals and man?. Alternatives to laboratory animals: ATLA. 2012, 40: 235-257.
Acknowledgements
The work has been funded by the German Federal Ministry for Education and Research, GO-Bio Grant No. 0315569.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Schimek, K., Horland, R., Brincker, S. et al. Aspects of vascularization in Multi-Organ-Chips. BMC Proc 7 (Suppl 6), O6 (2013). https://doi.org/10.1186/1753-6561-7-S6-O6
Published:
DOI: https://doi.org/10.1186/1753-6561-7-S6-O6