Three-dimensional cell culture can be regulated by vibration: low-frequency vibration increases the size of olfactory ensheathing cell spheroids
- 161 Downloads
Olfactory ensheathing cell (OEC) transplantation is emerging as a promising therapy for spinal cord injuries. However, outcomes are inconsistent, and the method needs improvement. Currently, cells are injected into the injury site as a suspension, and often fail to form a three-dimensional (3D) network crucial for both survival of the transplanted cells, and for regeneration of severed axons. 3D culture systems are therefore likely to improve the method. Of the many 3D culture systems available, the spheroid-producing naked liquid marble (NLM) technique is particularly advantageous compared to other platforms as it rapidly generates cell spheroids which can easily be extracted for further handling. To improve production of the spheroids, we designed and tested a device which allows fine control over vibrational stimuli to liquid marble cell cultures. We applied vibrational frequencies of 20, 60, and 80 Hz with consistent amplitude to NLM containing OECs and assessed the size and number of the 3D cell spheroids generated as well as the migratory capacity of cells cultured in the vibrated spheroids.
Vibrating the NLMs led to fewer and dramatically larger spheroids in comparison to non-vibrated NLMs. Of the frequencies tested, 60 Hz caused over 70-fold increase in spheroid volume. When transferred to a culture plate, the larger spheroids retained their structure after 72 h in culture, and cells that migrated out of the spheroids covered a significantly larger area compared to cells migrating out of spheroids formed at all the other frequencies tested.
We have shown that vibration can be used to regulate the formation of cell spheroids in NLM cultures. The ability to modulate the size of spheroids is useful for a range of 3D cell culture models and for preparing cells for in vivo transplantation.
KeywordsLiquid marble Glia Migration Transplantation Amplitude
Naked liquid marble
Olfactory ensheathing cell
Spinal cord injury
Cell transplantation therapies show strong promise for treating neural injuries, even spinal cord injury (SCI) [1, 2]. Various cell types are being trialled for transplantation, in particular stem cells (embryonic, mesenchymal and neural) and glial cells such as Schwann cells and olfactory ensheathing cells (OECs) [3, 4, 5, 6, 7, 8]. OECs in particular show great potential due to their ability to migrate long distances into scar tissue , promote axonal regeneration , interact with astrocytes , and phagocytose cell debris . OEC transplantation has resulted in some remarkable regeneration in animals and humans with SCI [2, 8, 9, 13, 14, 15]. However, a major issue with these therapies is the low survival rate of the cells post-transplantation, likely due to the unfavourable microenvironment around the injury site , and the lack of support matrices in place to assist the cells [16, 17]. OECs require cell-cell contacts for many functions, in particular migration , and the lack of cell-cell contact in cell suspensions may be contributing to the low survival rate. Another problem that is hampering optimal development of OEC transplantation therapies is that many of the biological functions of these cells remain unknown. If we can further understand the normal biology of OECs, their behaviours can be further optimised towards better outcomes, in particular improved interactions between OECs and different cell types. Understanding the complex behaviours of OECs in a 3D environment is essential for this, and therefore a 3D culture system that mimics the in vivo milieu is highly warranted for research purposes.
Liquid marbles (LMs) are miniature bioreactors that are formed by coating droplets of cell seeded medium with a hydrophobic powder . The lack of scaffolding commonly found in other 3D culturing systems allows for the self-assembly of cells into spheroids, which are small, spherical aggregates of proliferative and quiescent cells. Spheroid formation inside sessile LMs is highly variable, with a tendency for the cells to form non-uniform spheroid morphologies of various sizes, often with necrotic cores , and cell degradation at the edge of the aggregation . This is due to the deformation of LMs when cultured on a hard surface. In a sessile marble, the cells will settle on the bottom, rendering this method relatively similar to a scaled down version of a low adhesion plate. Sessile marbles also have a tendency to evaporate , causing wrinkling which further hinders efficient spheroid production.
To combat this deformation and evaporation, we previously developed the floating LM method for OEC culture . By floating the LMs on culture medium, the surface tension minimises marble deformation, and the medium also creates a humid microenvironment which prevents the majority of evaporation that occurs in sessile marbles. Additionally, a small air layer exists between the surface of the media and the LM that allows the LM to easily rotate due to natural vibrations. However, while the floating method has shown a vast improvement in the formation of uniform spheroid structures, there is still a large variability in size and number.
We have now developed a naked liquid marble (NLM) platform (Australian provisional patent 2,017,904,456, ) in which droplets of cell culture medium are incubated on a superhydrophobic coating. Inside the NLM platform, cells are free to interact with each other, forming multiple 3D spheroids that are uniform in size and shape in less than 24 h. To regulate the movement that occurs in NLMs, we have designed a device to apply a consistent and controllable source of sound-mediated vibration to the NLMs, and assessed how different frequencies affect the size and number of spheroids generated. This NLM system has been tested using not only OECs, but also human neural progenitor cells (ReNcell VM cell lines), as well as primary Schwann cells and Astrocytes . This system has also shown to be comparable to other methods of producing spheroids.
After spheroids have been generated from NLMs, it is essential that the OECs are capable of migrating out of the spheroids to be able to interact appropriately with cells in the target tissue. It is, however, also advantageous if the original spheroid retains some of its structure in the long term, as a 3D network of cells is also present directly at the injury site. Thus, an ideal spheroid retains its structure over time, but cells are also capable of migrating out of the spheroid. We therefore assessed how vibration at different frequencies affected not only the number and size of spheroids, but also retention of spheroid structure and the ability of cells to migrate out of the spheroids.
Calibration and amplitude distribution
Calibration of the rig was performed by measuring the amplitude produced on the plexiglass screen. The amplitudes produced were within 6% of the calculated values, corresponding to an experimental amplitude of ±0.28 mm. The same values/ranges were recorded for all frequencies.
Testing of the amplitude across the screen (Fig. 1b) showed a radial distribution with a substantial decrease starting 60 mm out from the centre, culminating in 90% reduction of amplitude on the outer rim, 150 mm from the centre (Fig. 1e). Statistical analysis of the mean recorded values for all points on the plexiglass screen showed a significant difference at all points out from the centre (p < 0.01).
While there was variation across the screen, we next tested how this translated into culture plates placed on the screen. We measured the amplitude at different positions on the plates: in the centre for a base reading, in the corner, in the middle of the long edge of the rectangular plate (Middle Edge Long) and the middle of the short edge of the plate (Middle Edge Short) (Fig. 1c). All results were compared to the control reading with no plate at the centre of the screen. Plate variation testing revealed a 3.8% decrease in amplitude at the centre with one plate, a 12% decrease on the Middle Edge Short, and a 7% increase in amplitude on the Middle Edge Long. All of these readings were significantly different compared to the control reading with no plate (p < 0.01) (Fig. 1f). The amplitude at the corner of the plate was not significantly different compared to the control (p > 0.05).
Due to the variation in vibration across the screen which would render the use of multiple plates at the same time difficult, we tested whether stacking plates on top of one another would provide a method to allow multiple plates to be vibrated at the same time (Fig. 1d). An increase in amplitude totalling 11 and 19% was observed after the addition of the second and third plate, respectively, and the recorded values for the two additional plates were significantly different when compared to only one plate (p < 0.01) (Fig. 1g). These data show that plate stacking is not appropriate as it leads to inconsistent vibration amplitude amongst the plates. Therefore, for all following assays, a single cell culture plate was placed in the centre of the screen.
Spheroid generation at test frequencies
Migration of cells out of spheroids
Thus, vibration of NLMs at 60 Hz led to the generation of the largest spheroids; these spheroids retained their structure completely at 24 h and partially at 72 h after formation. Cells migrating out of these spheroids covered a larger surface area than cells migrating out of the spheroids generated at other frequencies at 72 h.
To date, only a few studies concerning the effects of vibration on cell culture have been reported. These mainly focussed on bone tissue differentiation using cultured osteoblasts , or sleep related studies on cell stress/inflammation markers using epithelial cells . Studies have been performed on the effect of vibration on muscle  and bone tissue  for therapeutic purposes. There has, to our knowledge, only been one article published on the application of vibration in 3D cell culture . In this study we used an apparatus similar to the novel setup used previously , and a novel 3D cell culture method (Australian Provisional Patent 2,017,904,456)  to assess the effect of low frequency vibration on 3D OEC spheroids. Our results demonstrate that vibration of the cell suspension cultures at 60 Hz led to the formation of large, compact cell spheroids. The fact that spheroids keep their integrity is crucial for the three-dimensional cell organisation, and thus significant for optimal cell transplantation. The larger spheroids, which contained more cells, then gave rise to more extensive migration of cells out of the spheroid. Thus the production of 3D cell spheroids under controlled vibration may be useful for preparing optimal cell constructs for transplantation.
At the 60 Hz frequency, we observed over a 70-fold increase in spheroid size in comparison to the control, demonstrating that vibration has profound effects on spheroid size. We found that at 80 Hz (the highest frequency tested), the spheroids started to fracture and we concluded that 80 Hz is too violent a frequency for successful culturing of spheroids. We were unable to use a higher frequency (100 Hz) to further confirm this, as the equipment we were using was unable to achieve an amplitude of ±0.3 mm at 100 Hz. However, we can assume that 60 Hz is close to the upper limit tested of culturing with vibration without damage to the spheroids.
Vibration of NLMs containing OECs allows a successful way of modulating spheroid sizes, invaluable for in vitro studies of OEC behaviour. Being able to control spheroid size is also highly relevant for transplantation therapies, as the size of OEC spheroids can be tailored to individual types of injuries. An additional benefit may be an increased propensity for the cells of the spheroid to migrate in a cell-cell contact dependent manner . As the spheroids are larger, with more extensive cell-cell contact, cell migration may be improved, which would greatly increase the therapeutic potential for SCI repair.
In conclusion, we have shown that careful application of low frequency vibration significantly affects the size and number of spheroids formed within NLMs. For certain frequencies, vibration also promotes the prolonged migratory rate of OECs out of spheroids. The potential benefits of this with regards to the use of spheroids as a treatment for SCI are (1) a platform for providing a range of spheroid sizes tailorable to any injury model, and (2) a demonstrated improved migration of OECs out of larger spheroids. Finally, controlling the size of 3D-cultured spheroids is highly advantageous for studying complex cell-cell interactions and cell behaviours in the laboratory. To successfully utilize this system clinically, large-scale production of spheroids would be required. This is feasible with the availability of commercial laboratory vibration/shaker plates, which could easily be applicable to this method.
Cell culture conditions
Previously generated immortalized mouse olfactory ensheathing cells (OECs) that express green fluorescent protein (GFP) were used . Cells were maintained in complete medium containing 10% (vol/vol) fetal bovine serum (FBS) (Life Technologies), 10 μg mL− 1 basic fibroblast growth factor (FGF-2) (PeproTech), 10 ng mL− 1 epidermal growth factor (EGF) (PeproTech), 20 μg mL− 1 pituitary extract (Invitrogen), 2 μM forskolin (Sigma Aldrich), 2 mM gentamycin (Life Technologies), and Dulbecco’s Modified Eagle Medium: Nutrient Mix F12 (DMEM/F12) (Life Technologies). All cultures were incubated under standard incubation conditions of 37 °C and 5% CO2.
Spheroid generation using naked liquid marbles (NLMs)
NLMs were generated according to our previously described method . 500 cells/μL in 10 μL complete medium were aliquoted into superhydrophobic-coated, flat bottomed 96-well plates by hand to generate one NLM per well. Each plate could hold up to 96 marbles. For the purpose of these experiments, 12 × 10 μL marbles per plate were created for incubation under both vibration and control conditions (n = 12 NLMs per test condition, 3 replicates).
This amplitude was selected based on previous research in the field using a similar rig .
Vibrational distribution testing
Prior to the generation of NLMs, the distribution of vibration across the plexiglass screen was tested using an accelerometer (Arduino), to determine whether there was any variation in amplitude at different points on the screen. The accelerometer was placed in the centre to provide a base reading, then at increments of 30 mm out until reaching the edge (150 mm). To determine the amplitude variation across a plate, the distribution of vibration across a plate centred on the screen was also tested. The accelerometer was placed in the centre for a base reading, and in the corner and middle of each edge of the plate, designated the terms Middle Edge Long and Middle Edge Short. All results were compared to the control reading with no plate at the centre of the screen. Finally, variation testing involving plate stacking was also performed. A baseline reading was taken from the centre of the screen, then a plate fixed to the rig with adhesive tape. A reading was taken, then another plate fixed. This process was repeated for up to three plates in total.
Spheroid isolation and migration assays
After 24 h incubation, NLMs were transferred into a 10 mL Falcon tube, and 3 mL of complete medium was added to create a spheroid suspension. 10 μL of the spheroid suspension was transferred into each well of a 96-well plate and 50 μL of fresh complete medium was added. The plate was incubated for 24 h. A longer migration assay (72 h) was performed to evaluate the potential of larger spheroids generated via vibration to migrate continuously over a longer period of time.
After a 24 h incubation period, spheroids were removed from the NLMs and transferred into a 96-well plate. Images were taken by an Olympus XM10 under an Olympus IX73 fluorescence microscope. ImageJ software was used to measure: (1) the cross-sectional area of the spheroids and (2) the area covered by the cells that had migrated out of the spheroids.
Data normality was assessed and analysis were performed in SPSS using a Kruskal-Wallis Test with Dunn’s post hoc test or a one way ANOVA with Tukey’s Multiple Comparison post hoc test. All experiments were with triplicate independent assays (n = 3).
We thank Stephen Toms for performing electrical safety testing of the equipment used in the experiments.
This study was supported by an Australian Government Research Training Program scholarship to LB, a Griffith University International Postgraduate Research Scholarship to MC, A Griffith University Postdoctoral Fellowship to JT, a Queensland Motor Accident Insurance Commission grant to JS and JE, a Clem Jones Foundation grant to JS, a Perry Cross Spinal Research Foundation grant to JS, MT, and JE and another Perry Cross Spinal Research Foundation grant to JE and JSJ.
Availability of data and materials
The data generated and analysed during this study is available from the corresponding author on reasonable request.
LB designed the study, drafted the manuscript, built and tested the testing apparatus, performed the experiments, and analysed the data. MT, JE, and JS designed the experiments and wrote the manuscript. JV assisted with cell culture and imaging. MV and JE assisted with statistical analysis. MC assisted with NLM production and development. All authors read and approved the final manuscript.
Ethics approval and consent to participate
Consent for publication
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
- 9.Barton MJ, St John J, Clarke M, Wright A, Ekberg J. The glia response after peripheral nerve injury: a comparison between Schwann cells and olfactory Ensheathing cells and their uses for neural regenerative therapies. Int J Mol Sci. 2017;18(2).Google Scholar
- 23.Chen M, Shah MP, Shelper TB, Nazareth L, Barker M, Tello Velasquez J, et al. Naked liquid marbles: a robust three-dimensional low-volume cell culturing system. ACS Appl Mater Interfaces. 2019;11(10):9814–9823.Google Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.