Production and characterization of virus-like particles of grapevine fanleaf virus presenting L2 epitope of human papillomavirus minor capsid protein
- 302 Downloads
Virus-like particle (VLP) platform represents a promising approach for the generation of efficient and immunogenic subunit vaccines. Here, the feasibility of using grapevine fanleaf virus (GFLV) VLPs as a new carrier for the presentation of human papillomavirus (HPV) L2 epitope was studied. To achieve this goal, a model of the HPV L2 epitope secondary structure was predicted and its insertion within 5 external loops in the GFLV capsid protein (CP) was evaluated.
The epitope sequence was genetically inserted in the αB-αB” domain C of the GFLV CP, which was then over-expressed in Pichia pastoris and Escherichia coli. The highest expression yield was obtained in E. coli. Using this system, VLP formation requires a denaturation-refolding step, whereas VLPs with lower production yield were directly formed using P. pastoris, as confirmed by electron microscopy and immunostaining electron microscopy. Since the GFLV L2 VLPs were found to interact with the HPV L2 antibody under native conditions in capillary electrophoresis and in ELISA, it can be assumed that the inserted epitope is located at the VLP surface with its proper ternary structure.
The results demonstrate that GFLV VLPs constitute a potential scaffold for surface display of the epitope of interest.
KeywordsBionanoparticles Heterologous expression systems Protein refolding HPV Nepovirus Vaccine antigen
Bovine serum albumin
Cowpea chlorotic mottle virus
Cowpea mosaic virus
Grapevine fanleaf virus
Immunostaining electron microscopy
Protein Data Bank
Poly (ethylene oxide)
Protein Design Assistant
Size exclusion chromatography
Transmission electron microscopy
Virus-like particles (VLPs) are among the most easily-produced nanomaterials, since they result from the self-assembly of the capsid protein (CP). VLPs can be modified either genetically or chemically for various downstream applications i.e. as biomaterials , drug-delivery systems, bio-imaging and chemical tools [2, 3, 4], for their catalytic role [5, 6, 7, 8] but also as vaccines [9, 10, 11]. Among the different types of vaccines, the use of subunit vaccines has been considered as a safer approach than that of inactivated pathogens . However, such small molecules, e.g. composed of oligopeptides, act as weak immunogens . A substantial increase in the immune response is observed when relevant epitopes are placed on the surface of macromolecular carriers, like large proteins or highly ordered structures such as VLPs .
Plant viruses are particularly interesting since they are not infectious for humans and animals. Compared to most animal viruses, the structure of the majority of plant viruses is very simple and often made up of a single CP type. Moreover, most of them are nonenveloped and they present a very high level of accumulation in their host [15, 16, 17, 18, 19]. In recent years, the potential use of plant virus-derived VLPs as novel proteic scaffold for displaying foreign epitopes has been studied. Immunogenic foreign peptides can be either genetically or chemically fused to the plant virus CP. Some of these virus platforms have been tested as potential subunit vaccines to prevent human or animal viral diseases [15, 16, 20, 21].
VLPs based on several plant viruses were tested, including cowpea mosaic virus (CPMV), alfalfa mosaic virus, tobacco mosaic virus, potato virus C, tomato bushy stunt virus, zucchini yellow mosaic virus, plum pox virus, papaya mosaic virus, cucumber mosaic virus and cowpea chlorotic mottle virus (CCMV) [22, 23, 24, 25, 26, 27]. In some cases, VLP assembly takes place under certain conditions such as pH, ionic strength and presence of the viral genomic RNA. Morever, the potential insertion sites within the VLPs are usually limited based on the protein structure . Therefore, there is a need for searching novel and versatile VLP systems. To this end, grapevine fanleaf virus (GFLV) has not been extensively studied as VLP-based platform for foreign epitope presentation. GFLV is a bipartite, linear, single stranded positive sense RNA genome virus which belongs to the genus Nepovirus. Considering the structural features of the GFLV capsid, it is composed of 60 copies of a single coat protein (504 amino acids, 56 kDa) without any envelope. The ternary structure of the CP subunit is defined by three jelly-roll domains named C, B and A from the N- to C- termini, respectively. The viral structure has been elucidated at 2.7 Å resolution .
Recently, GFLV VLPs have been transiently expressed using pEAQ-HT vector in Nicotiana benthamiana . These authors showed that epitopes inserted in the N- and C-termini were exposed on the particle surface. However, no study related to insertion sites within the internal domains of GFLV VLP is available. To the best of our knowledge, the in vitro assembly of GFLV VLPs has never been studied.
VLPs from plant viruses have been produced in various microbial expression systems, namely Escherichia coli, Pseudomonas fluorescens, Pichia pastoris and Saccharomyces cerevisiae [26, 31, 32, 33, 34]. These expression systems include prokaryotic and eukaryotic organisms, each having its own advantages and drawbacks. Indeed, production in prokaryotic systems is generally cost-effective and can take place in a short period of time. However, the lack of post-translational modifications and the presence of endotoxins are the most intriguing problems when using these systems . Moreover, since large amount of proteins is often produced in an insoluble form, extra denaturation and refolding processes may be required, as it was the case for CCMV . Concerning the yeast expression system, the quantity of the produced proteins is usually lower than in E. coli. Nevertheless, soluble proteins are obtained without an extra solubilization step. Moreover, this system is easy to manipulate and offers high expression yields as well as ease of scale-up .
High-risk genotypes of human papillomavirus (HPV) are responsible for cancers in females and males. Around 70 % of the cervical cancers are due to HPV16 and 18 genotypes . The current vaccines are based on the major capsid protein (L1) giving rise to a HPV type-restricted protection. Instead, the HPV minor capsid protein (L2) contains cross-type neutralizing epitopes that broaden protection against various HPV types when they are displayed on a VLP platform . HPV L2 epitopes (up to 36 amino acids) have been displayed on VLPs of HPV16 L1, bacteriophages PP7, MS2 and potato virus X that were expressed in baculoviruses, bacteria and plants [21, 38, 39, 40].
Here we have studied the feasibility of using GFLV VLPs as scaffold for HPV L2 epitope presentation albeit maintaining VLP formation. To achieve this goal, GFLV VLPs displaying HPV L2 epitope as well as GFLV CP VLPs were expressed in both Escherichia coli and Pichia pastoris systems.
GFLV-L2 VLP modeling and selection of the epitope insertion and fusion site
Cloning, expression and production of GFLV VLPs in E. coli
Restriction enzyme analysis confirmed that the GFLV CP and GFLV L2 genes (1.5 kb) were inserted in the pET26B vector between NcoI-BamHI cloning sites. Further, nucleotide sequencing using specific primers confirmed the insertion of the GFLV CP and GFLV L2 genes in frame with pelB leader sequence without any mutation. Additional file 1: Figure S1A shows a SDS-PAGE analysis of protein expression in E. coli strains BL21 (DE3). The detection of a distinct band at 56–57 kDa in lanes 3 and 4 indicates that large amounts of the recombinant GFLV CP and GFLV L2 in an insoluble form were produced in E. coli.
Various expression conditions were examined in order to obtain the GFLV CP and GFLV L2 in a soluble form in E. coli, such as different E. coli strains (BL21 and SHuffle T7 cells), induction times (2, 4, 6 and 8 h), isopropyl β-D-1-thiogalactopyranoside (IPTG) concentrations (0.25, 0.5 and 0.8 mM) and growth temperatures (15, 25 and 37 °C). However, under all tested conditions, the proteins were expressed as inclusion bodies (IBs). The highest expression yield was obtained using the strain BL21 (DE3), 0.25 mM IPTG at 37 °C during 4 h in a shaker.
To solubilize the proteins of interest, different solutions containing one or several compounds were tested (8 M urea and 1% triton X-100; 8 M urea, 1% triton X-100 and 10 mM dithiothreitol (DTT); 8 M urea, 1% triton X-100, 10 mM DTT and 14 mM mercaptoethanol, pH = 8 for 4 and 6 h at 4 °C; 10 mM SDS and 15 mM DTT; 8 M urea and 10 mM DTT, pH = 7 for 16 h at 4 °C). The IBs were found to be solubilized in solutions containing 10 mM SDS and 15 mM DTT or 8 M urea and 10 mM DTT, pH = 7 for 16 h at 4 °C. The solubilization of the IBs in the solution containing urea during 16 h at 4 °C was found to be the best protocol. Indeed, as shown in Additional file 1: Figure S1B, the GFLV CP and GFLV L2 were almost completely solubilized under these conditions. The proteins were then purified by size exclusion chromatography (SEC) using a Superdex 200 column. For the VLP assembly from the purified GFLV CP and GFLV L2, different buffers were evaluated. It was found that an acidic pH and a high ionic strength led to protein aggregation at both temperatures (4 and 25 °C). The GFLV CP and GFLV L2 were found to self-assemble into VLPs after two steps of dialysis in HEPES buffer at pH 8 and 4 °C. GFLV VLPs were then concentrated by sucrose cushion ultracentrifugation. As can be seen in Additional file 1: Figure S1C, highly purified GFLV CP and GFLV L2 VLPs could be obtained (estimated purity: 94 and 93%, respectively).
Cloning, expression and production of GFLV VLPs in P. pastoris
The correct sequences and frames for sequential translation of the α-factor and GFLV CP or GFLV L2 fragments into pPICZα were confirmed by sequencing. GFLV CP and GFLV L2 were expressed after three days of culture and in the presence of 2% methanol. They were secreted into the culture medium along with the α-factor signal which was cleaved by the Kex2 protease. The supernatants from the positive colonies that grew in the highest concentration of Zeocin™ were analyzed by SDS-PAGE after concentration by ultracentrifugation (cf. Additional file 2: Figure S2A). As shown in this Figure, A1 clone of GFLV CP and A3 clone of GFLV L2 (lanes 1 and 3) were found to secrete high protein levels while the GFLV CP and GFLV L2 were not expressed in A2 and A4 clones, respectively (lanes 2 and 4). The proteins of interest were not observed in the culture of P. pastoris transformed with the empty pPICZα vector in the presence of methanol (lane 5). The cultures of the selected clones were concentrated by sucrose cushion ultracentrifugation (cf. Additional file 2: Figure S2B; estimated purity: 97% for GFLV CP VLPs and 98% for GFLV L2 VLPs).
Characterization of the capsid proteins
Characterization of the GFLV VLPs
GFLV VLPs are nucleic acid-free
The agarose gel electrophoresis of the RT-PCR products of GFLV CP and GFLV L2 mRNA that was amplified using one set of specific primers showed that CP mRNA was not encapsidated into VLPs produced from E. coli (lanes 1–2, Additional file 4: Figure S4) and from P. pastoris (lanes 3–4, Additional file 4: Figure S4). According to these results, it can be concluded that GFLV VLPs assemble independently from RNA.
The discovery of a rational VLP system for displaying epitopes of interest is obviously a challenging effort. Indeed, the scaffolding protein has to present a potential flexibility for any changes and the functionality of the epitope has to be preserved. Here we present a VLP platform based on GFLV particles to expose HPV L2 epitope on its surface without interfering in VLP formation.
Based on in silico data, loop structures βB-βC and αB-αB” (domain C) were predicted as epitope insertion sites and the latter was selected for expression experiments. Expression of GFLV constructs in E. coli ended up in the formation of IBs. This was already reported for other plant VLP systems like CCMV and Faba bean necrotic yellows virus [26, 44]. This might be due to the presence of intra- and inter-molecular disufide bonds in cysteine-rich proteins, as is the case for GFLV CP . To solubilize GFLV expressed in E. coli, an extra step was developed. This step is required for VLP formation, as also shown for CCMV VLPs . TEM examination of GFLV L2 VLPs showed the presence of spherical particles similar to GFLV particles indicating that the insertion of the HPV L2 sequence does not abolish VLP formation. In addition, the expression of the GFLV CP and GFLV L2 within P. pastoris, ended up with the formation of VLPs, as already reported for CCMV . When comparing both expression systems used in this study, it can be concluded that in E. coli, the use of a fast and easy process results in a higher amount of the protein than in P. pastoris. However, in yeast, soluble proteins are obtained without an extra solubilization step. GFLV particles can also be produced in N. benthamiana but it is worth noting that the amount of protein is very low (386 to 445 μg/kg fresh leaf) . Transient expression has also been used for the production of other plant virus-derived VLPs, such as CPMV , turnip crinkle virus  and Ageratum yellow vein virus . Unlike bacterial expression systems, plants are able to provide post-translational maturations such as glycosylation and also reduce the risk of endotoxin contamination .
From the GFLV CP 3D structure, it could be deduced that the selected 79–85 loop of all sixty CP subunits is surface accessible. The insertion in this loop did not interfere in the CP- CP interactions necessary for VLP assembly and stability and resulted in the exposure of the HPV L2 epitope at the particle outer surface in its native conformation. In agreement with our results, Schellenberger et al. reported that the replacement in the CP region R1 of GFLV (amino acids 79–85) to CP region R1 of Arabis mosaic virus, which is located at the external surface of the particles, did not interfere with virus encapsidation .
Since GFLV L2 VLPs were found to interact with the HPV L2 antibody under native conditions in capillary electrophoresis and in ELISA, it can be assumed that the inserted epitope is located at the VLP surface with its proper ternary structure. This is obviously crucial for the use of GFLV L2 VLPs as a potential vaccine. Previous studies reported that this HPV L2 epitope located at the N-terminal part of MS2 phage has more conformational flexibility than in the AB-loop of PP7 phage, allowing the formation of a disulfide bond in the epitope and leading to a better presentation of the peptide, inducing a more broadly reactive antibody response against the HPV L2 epitope [21, 51].
The absence of GFLV mRNA was confirmed using purified VLPs as input for RT-PCR. However, the encapsulation of non-specific mRNA and DNA within the VLPs cannot be excluded. To avoid any encapsulation of nucleic acids, the subunits might be treated using RNaseA and DNase before VLP formation.
In this study, the generation of a new icosahedral VLP carrier through the cloning and expression of the GFLV CP and GFLV L2 genes in E. coli and P. pastoris was demonstrated. VLPs containing an epitope from the HPV minor CP (HPV L2 epitope) were obtained. The application of GFLV L2 VLPs as a promising vaccine antigen will be clear after immunization tests. Besides loop αB-αB”, βB-βC loop might be investigated as another insertion site for possible divalent exposure of candidate peptides at the same time.
Prediction of HPV L2 epitope structure and insertion sites in GFLV VLP
Since the crystal structure of HPV L2 minor protein is not available, the secondary structure model of the HPV L2 epitope (NH3-QLYKTCKQAGTCPPD-COOH) was constructed by examining small epitope fragments in Protein Design Assistant (ProDA; http://bioinf.modares.ac.ir/software/linda/). To this end, the HPV L2 epitope sequence was divided into three parts, namely QLYKT, CKQAGTC and CPPD, which were used as query sequences in ProDA. Finally, the PDB files of the described structures were used as templates to model HPV L2 epitope using MODELLER software . The model was visualized with YASARA software (http://www.yasara.org/).
The GFLV CP PDB code  was used as input to search for potential insertion sites using YASARA software.
Construction and expression of GFLV CP and GFLV L2 in E. coli
To produce pBluescript II SK-GFLV-L2 construct, GFLV L2 gene was synthesized and cloned into the NcoI and BamHI sites by BioBasic Company (Toronto, Canada). pGEM-GFLV CP  and pBluescript II SK-GFLV-L2 were used as templates for amplification of GFLV CP and GFLV L2 genes using a primer set (Sense primer:5′-CCA GCC GGC GAT GGC CAT GGG ATT AGC TGG TAG AGG-3′; antisense primer: 5′-ACG GAG CTC GAA TTC GGA TCC CTA GAC TGG GAA ACT GGT TCT CCA-3′ which includes two homologous region CCA GCC GGC GAT GGC and ACG GAG CTC GAA TTC GGA TCC) and Phusion High Fidelity DNA polymerase (New England Biolabs, Ipswich, MA, USA). The amplified fragments were subcloned in the pET26 vector in frame with the pelB leader sequence using the Gibson assembling cloning master mix for 15 min at 50 °C (New England Biolabs) and transformed into E. coli DG1 (Eurogentec, Liege, Belgium). The grown colonies were tested and analysed using colony PCR, digestion analyses and sequencing to confirm GFLV CP and GFLV L2 constructs. Finally, the positive plasmids were transformed into E. coli BL21 (DE3) (New England Biolabs) using the calcium chloride transformation method.
E. coli strains BL21 (DE3) transformed with pET26 GFLV CP and pET26 GFLV L2 were grown overnight in Luria–Bertani (LB) medium containing 50 mg/L kanamycin. One mL of the overnight culture was added to 100 mL of fresh LB culture medium and incubated at 37 °C. When the OD600 reached a value of 0.8–1, 0.1–0.25 mM IPTG was added and the cultures were incubated at 18–37 °C for 1–4 h. Pelleted cells were collected by centrifugation and stored at − 20 °C for use in subsequent steps. The negative control was empty pET26 vector.
In vitro denaturing and refolding of GFLV VLPs produced by E. coli
To solubilize GFLV CP and GFLV L2 proteins, a process of denaturing and refolding was adapted from a previous work  with some modifications. The insoluble proteins produced in E. coli were dissolved in 15 mL of disassembly buffer (0.02 M Tris-HCl, 0.01 M DTT and 8 M urea, pH 7) with slow rotation during 16 h at 4 °C. The dissolved proteins were centrifuged at 16000 rpm for 15 min. The supernatants were filtered and purified by SEC using a Superdex 200 column. SEC runs were performed at a constant flow rate of 2 mL/min using the disassembly buffer (0.02 M Tris-HCl, 0.01 M DTT, 8 M urea, pH 7) containing 2.5 M NaCl as eluent. Twenty μL of the peak fractions were analysed by SDS-PAGE. The fractions containing the purified GFLV CP and GFLV L2 were dialyzed 6 times against the dialysis buffer (0.02 M Tris-HCl, pH 7) and were refolded using 2 cycles of dialysis against the reassembly buffer (0.1 M HEPES, pH 8). Finally, the GFLV VLPs concentrated using ultracentrifugation were dissolved in the virus buffer (0.1 M HEPES, 0.001 M EDTA, pH 8) (Merck, Darmstadt, Germany).
Construction of recombinant P. pastoris
The PCR of the GFLV CP and GFLV L2 genes were done using a primer set (sense primer: 5′- AAG AAG GGG TAT CTC TCG AGA AAA GAG AGG CTG AAG CTA TGG GAT TAG CTG GTA GAG GAG − 3′; antisense primer:5′- GCT GGC GGC CGC CGC CTA GAC TGG GAA ACT GGT TCT − 3′ which includes two homologous regions AAG AAG GGG TAT CTC TCG AGA AAA GAG AGG CTG AAG CTA and GCT GGC GGC CGC CGC, respectively) and the recombinant plasmid (pPICZα-CP) with α-factor sequence was constructed by Gibson assembly method . Five-ten μg of pPICZα-CP DNA plasmid were linearized using PmeI enzyme and introduced in P. pastoris X-33 by electroporation as described in the Pichia Expression Kit protocol (Invitrogen, Carlsbad, CA, USA).
Selection of multiple copy recombinant genes in P. pastoris
The PCR-positive colonies on YPDS-Zeocin™ (100 mg/mL) agar plates were cultured in 250 μL YPD medium and incubated for 48 h at 28–30 °C. Ten μL of each culture was then recultured in 240 μL fresh YPD medium and incubated at 30 °C for 24 h. This step was repeated 3 times. Ten μL of the last microplate was cultured in 240 μL fresh YPD medium with three concentrations of Zeocin™, i. e. 0.25 mg/mL, 0.5 mg/mL and 1.0 mg/mL. The microplates were incubated for 3–4 days at 30 °C until the cells grew.
Laboratory scale yeast cell density and total protein expression
Sixty μL of the selected transformants were inoculated into 5 mL YPD medium and shaked at 200 rpm for 16–18 h at 30 °C. Afterwards, 20 mL of BMGY medium were inoculated with 250 μL of YPD culture and incubated as described above. When the OD600 had a value of 2–6, a centrifugation at 4800 rpm for 10 min was performed. Pelleted cells were resuspended in 20 mL of BMMY medium and incubated at 28 °C until the OD600 reached a value of 2–6. Sterile pure methanol (final concentration of 2%) was then added every 24 h to maintain induction. Every 12 h, 1 mL of the induced culture was sampled and 1 mL of BMMY medium was added to keep the original volume of the culture, for the determination of the protein expression level in the supernatant by SDS-PAGE and Western blotting. All materials used in the culture media were purchased from Sigma Aldrich (Saint-Louis, MO, USA).
Purification and concentration of GFLV VLPs
The cultures of P. pastoris containing the expressed protein were first centrifuged (10,000 g) for 30 min. The supernatants were centrifuged at 73,360 g (Beckman Type 30 rotor, Brea, CA, USA) for 2 h to pellet VLPs . VLPs were resuspended in the virus buffer and further purified by the sucrose cushion centrifugation. For this purpose, 2 mL of the VLP suspensions were added to 15 mL of 20% sucrose solution (w/v) and centrifuged at 40,000 rpm for 3 h. VLP pellets were again resuspended in the virus buffer and dialyzed against the virus buffer. For the concentration of the GFLV VLPs produced in E. coli, the sucrose cushion method described above was also applied.
SDS-PAGE and Western blotting
The proteins expressed in both systems were analyzed in a 12% SDS-PAGE gel followed by Western blot (Bio-Rad, Hercules, CA, USA). Western blotting analysis was performed using anti-GFLV CP polyclonal antibody (1:1000) (DSMZ, Braunschweig, Germany) and mouse anti-L2 polyclonal sera (kindly provided by Dr. Ebenezer Tumban, Department of Molecular Genetics and Microbiology, University of New Mexico School of Medicine). The development of the signals was carried out using the Super Signal West Pico Chemiluminescent Substrate (Thermo Scientific, Waltham, MA, USA) (Amersham™ Imager 600).
Transmission electron microscopy (TEM) and immunostaining electron microscopy (ISEM)
GFLV VLPs were analyzed by TEM (Jeol JEM-1400, Jeol, Zaventem, Belgium). For this purpose, 10 μL of the samples, previously diluted 10–15 times in the virus buffer were placed on 400 mesh copper grids (Laborimpex, Brussels, Belgium) for 2 min followed by negative staining. The mean particle diameter was determined on the basis of the analysis of 20 particles. The ISEM was performed following the procedure published by . Thirty μL of the samples were placed on 200 mesh Formvar/Carbon Nickel grids (Laborimpex) for 60 min, followed by blocking using PBS buffer containing 1% bovine serum albumin (BSA) for 20 min. Anti-GFLV CP polyclonal antibody (1:100) or anti-L2 polyclonal sera (kindly provided by Dr. Ebenezer Tumban) was used as primary antibody and goat anti-rabbit-gold (10 nm) conjugates (AURION, Wageningen, Netherlands) were employed as secondary antibody at a 1:40 dilution in PBS buffer for 60 min (supplemented with 0.2% BSA and normal goat serum, 1:50). After 5 washing steps, samples were postfixed for 10 min in 2.5% glutaraldehyde and counterstained using 2.5% uranyl acetate for 10 min followed by 4 washes and an incubation of 10 min in lead citrate. Grids were finally washed 4 times in deionized water and examined by TEM (Jeol JEM-1400) at 80 kV using GFLV virion derived VLPs as a positive control. When the secondary antibody was omitted, no label occurred (data not shown).
To confirm VLP formation and to evaluate the exposition of HPV L2 epitope on the VLP surface, ELISA analysis was performed as previously described in [55, 56]. VLP antigens were diluted in 0.1 M PBS (pH 7.2; final concentration: 1000 ng/mL) and kept on ice prior to the analysis. VLPs were tested using serial dilutions of rabbit anti-GFLV polyclonal antibody (1:500, 1:1000, 1:2000, 1:3000) (DSMZ) and mouse monoclonal antibody raised against amino acids 1–40 of HPV16 L2 (1:500, 1:1000, 1:2000, 1:3000) (Santa Cruz, Heidelberg, Germany). Goat anti-rabbit-IgG and goat anti-mouse-IgG alkaline phosphatase conjugates (1:3000) (Promega, USA) were used as secondary antibodies. The wells were developed in 4-nitrophenyl phosphate disodium salt hexahydrate (Sigma-Aldrich) and the absorbance was measured using an ELISA reader Anthos 2020 at 405 nm.
Size exclusion chromatography (SEC)
VLPs were purified by size exclusion chromatography on a 2 mL column of Sephacryl 300 using 100 mM HEPES and 0.001 M EDTA (pH 8) buffer.
Capillary electrophoresis (CE)
The experiments were performed on a HP3D CE system (Agilent Technologies Waldbronn, Germany). This instrument is equipped with an autosampler and a temperature control system (15–60 °C ± 0.1 °C). The detection was carried out using an on-column diode array detector. UV detection was set at 280 nm. Bare fused-silica capillaries with an internal diameter of 50 μm were purchased from Optronis (Kehl, Germany). Capillaries of 48.5 cm total length (8.5 cm effective length) were dynamically coated with poly (ethylene oxide) (PEO) according to the procedure previously reported by . Experiments were performed using the outlet injection mode. VLP samples were injected hydrodynamically by applying a pressure of − 50 mbar during 15 s. Anti-GFLV antibody (DSMZ) and mouse monoclonal antibody raised against amino acids 1–40 of HPV16 L2 (Santa Cruz) were used for affinity experiments. The separation was performed applying a voltage of 10 kV (normal polarity mode) and the capillary was thermostated at a temperature of 15 °C.
Detection of nucleic acid in GFLV VLPs
RT-PCR test was performed to evaluate the presence or the absence of nucleic acid in GFLV VLPs. Total RNA was purified from VLPs using Trizol according to the manufacturer’s instructions (Invitrogen, Carlsbad, CA, USA) and specific primers of GFLV CP were used for the detection of viral mRNA in the VLPs.
The authors would like to thank Dr. Ebenezer Tumban (Department of Molecular Genetics and Microbiology, University of New Mexico School of Medicine) for providing mouse anti-L2 polyclonal sera.
RY carried out the constructs, the expression in P. pastoris and E. coli under the supervision of AB, the ELISA analysis under the supervision of NJ and ACS and the CE experiments under the supervision of ACS. RY wrote the paper with the help of MSB and ACS. SSA conducted the bioinformatics analysis. NT and MT carried out the TEM and ISEM analysis. AB performed the SEC analysis. AHM, JC, MF and NJ participated to the scientific discussion about the results and reviewed the manuscript. ACS conducted the study and participated in its design and coordination. All authors have read and approved the final manuscript.
The study was funded by the Tarbiat Modares University, the University of Liège (« Fonds spéciaux pour la recherche ») and the Fonds Leon Fredericq. These organizations were not involved in the design of the study, the collection, analysis, and interpretation of data and in writing the manuscript.
Ethics approval and consent to participate
Consent for publication
The authors declare that they have no competing interests.
- 35.Shams-bakhsh M, Symons RH. Cloning and expression of the coat protein gene of barley yellow dwarf virus-PAV in Escherichia coli. Iran J Biotechnol. 2004;2(2):84–9.Google Scholar
- 39.do Carmo Caldeira J, Medford A, Kines RC, Lino CA, Schiller JT, Chackerian B, et al. Immunogenic display of diverse peptides, including a broadly cross-type neutralizing human papillomavirus L2 epitope, on virus-like particles of the RNA bacteriophage PP7. Vaccine. 2010;28:4384–93.CrossRefGoogle Scholar
- 48.Hesketh EL, Saunders K, Fisher C, Potze J, Stanley J, Lomonossoff GP, et al. The 3.3 Å structure of a plant geminivirus using cryo-EM. Nat Commun. 2018;9:2369.Google Scholar
- 49.Marsian J, Lomonossoff GP. Molecular pharming—VLPs made in plants. Curr Opin Biotechnol. 2016;37:201–6.Google Scholar
- 50.Schellenberger P, Andret-Link P, Schmitt-Keichinger C, Bergdoll M, Marmonier A, Vigne E, et al. A stretch of 11 amino acids in the βB-βC loop of the coat protein of grapevine fanleaf virus is essential for transmission by the nematode Xiphinema index. J Virol. 2010;84:7924–33.PubMedPubMedCentralCrossRefGoogle Scholar
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.