# Modeling gene-environment interactions in longitudinal family studies: a comparison of methods and their application to the association between the IGF pathway and childhood obesity

- 100 Downloads

**Part of the following topical collections:**

## Abstract

### Background

The interactive effect of the IGF pathway genes with the environment may contribute to childhood obesity. Such gene-environment interactions can take on complex forms. Detecting those relationships using longitudinal family studies requires simultaneously accounting for correlations within individuals and families.

### Methods

We studied three methods for detecting interaction effects in longitudinal family studies. The twin model and the nonparametric partition-based score test utilized individual outcome averages, whereas the linear mixed model used all available longitudinal data points. Simulation experiments were performed to evaluate the methods’ power to detect different gene-environment interaction relationships. These methods were applied to the Quebec Newborn Twin Study data to test for interaction effects between the IGF pathway genes (IGF-1, IGFALS) and environmental factors (physical activity, daycare attendance and sleep duration) on body mass index outcomes.

### Results

For the simulated data, the twin model with the mean time summary statistic yielded good performance overall. Modelling an interaction as linear when the true model had a different relationship influenced power; for certain non-linear interactions, none of the three methods were effective. Our analysis of the IGF pathway genes showed suggestive association for the joint effect of IGF-1 variant at position 102,791,894 of chromosome 12 and physical activity. However, this association was not statistically significant after multiple testing correction.

### Conclusions

The analytical approaches considered in this study were not robust to different gene-environment interactions. Methodological innovations are needed to improve the current methods’ performances for detecting non-linear interactions. More studies are needed in order to better understand the IGF pathway’s role in childhood obesity development.

## Keywords

Childhood obesity Insulin-like growth factors Twin studies Longitudinal family studies Gene-environment interaction Non-linear interaction Simulation studies## Background

Childhood obesity is an important public health issue due to its negative impact on individual wellbeing and on the healthcare system [1, 2, 3, 4, 5, 6, 7]. To fully elucidate the complex processes underlying childhood obesity, we need to consider the joint gene-environmental basis of this disease. Studying gene-environment (GE) interactions can improve our understanding of how genetic differences contribute to phenotype variability in the population [8]. This is important for childhood obesity since currently identified genetic associations can only explain 1.45% of the body weight variation, while heritability studies have estimated that 40 to 70% of this variance is under genetic influence [9]. GE interactions likely play an important role in obesity development, as the disease is also attributed to many environmental causes. In addition to genetic predisposition, various environmental factors also affect energy intake and expenditure, the two primary driving forces behind obesity development. These environmental risk factors include high dietary sugar consumption, poor sleep habits, comfortable ambient temperature, low physical activity and large-scale social forces such as media influence [10, 11, 12]. An example of such interactions is that physical activity has been shown to modify the obesity risks associated with the FTO gene variants [9]. Thus, given the limitations in our understanding of childhood obesity, it is important to explore GE interactions to help us clarify the genetic basis of this disease.

The insulin-like growth factor (IGF) pathway genes, which are intimately involved in body fat regulation, have functional effects that can be influenced by the environment. The insulin-like growth factor-1 (IGF-1) proteins can directly modulate carbohydrate metabolism and adipose tissue growth [13, 14]. The growth hormone (GH) and the insulin-like growth factor binding protein, acid-labile subunits (IGFALS) regulate IGF-1 availability by increasing its production and circulation concentration, respectively [13, 14, 15, 16, 17, 18]. The effect of those proteins can be modified by many environmental factors. Increased physical activity has been shown to be associated with higher GH and IGF-1 levels [19, 20, 21]. GH production in the body also correlates with the length of the slow wave phase of sleep [22]. Indirectly, the IGF pathway and daycare attendance may interact via inflammation-related neutrophil proteases that target the IGF proteins [23]. This is because children attending daycare facilities are at increased risk for infectious diseases, and consequently more frequent occurrence of inflammatory response [24]. For example, the proportion of children with common childhood illnesses like lower respiratory infections and diarrhea is significantly higher in children who attend daycare. There is also some evidence that children attending daycare are at increased risk of obesity [25, 26, 27]. Given the IGF pathway’s involvement in body fat regulation, environmental modulations of the pathway could manifest as GE interaction effect on obesity development. Thus in this study, we hypothesize three potential GE interaction scenarios between the IGF pathway genes (IGF-1, IGFALS) and environmental factors (physical activity, daycare attendance and sleep duration).

One way to evaluate potential GE interactions is by conducting longitudinal family studies. This involves recruiting samples of related individuals, and collecting data repeatedly on the same participant over time. Longitudinal family data can provide additional information and increased statistical power, but at the cost of analytical challenges due to correlated data structure. The longitudinal aspect of the study can provide information relating to the temporal pattern of genetic contributions to a trait, while knowledge of family structure can help in imputing missing genotype data and determining segregation patterns [28, 29]. Improvement in statistical power comes from the fact that more reliable data are available through repeated measurement, and the ability to sample families rich in potentially associated genetic variants [29, 30]. However, leveraging the benefits of longitudinal family studies requires properly accounting for correlations due to familial relations and repeated outcomes in data analysis. One approach involves incorporating random effects with an assumed covariance structure to accommodate both familial and over time correlations. This can be achieved in the linear mixed model framework [31, 32]. Alternatively, simplified correlation structure allows the application of models not designed for longitudinal family data. Repeated outcomes can be transformed into summary statistics (e.g. mean over time) and analyzed using cross sectional methods like the twin study model [33]. Familial correlation can be simplified by ignoring the difference in correlations due to different kinship relations within a family. The family-wise permutation test for *p*-value estimation represents one such approach. This permutation procedure accounts for familial correlation by restricting the random shuffling of outcome-predictor pairing to each family, but without distinguishing the specific pedigree relations within the family [34]. However, model simplification by averaging over time or assuming equal familial correlation could result in a loss of power as all the information in the data is not being utilized.

In addition to the complex data structures encountered in longitudinal family studies, GE interaction relationships can take on many forms. This creates difficulty when modeling the interaction effect parametrically, as the effect pattern can be misspecified. A linear interaction pattern is assumed when modeling with the conventional multiplicative product term in regression models. [35] However, many non-linear effect patterns are also possible. For example, genetic and environmental factors may interact in an extremely non-linear manner called exclusive OR (XOR) interactions. This can be interpreted as two opposing patterns of genetic effect under different environmental conditions. An example is the case of sickle cell anemia, where having one copy of the disease allele confers improved survival if the individual lives in malaria affected regions. Similar effects are also observed in psychiatric genetics in the case of plasticity genes. Individuals with certain alleles are hypothesized to be more receptive to environmental factors that may be either beneficial or harmful depending on the specific environmental conditions [36]. For instance, individuals with low-activity variant of the monoamine oxidase-A (MAOA) gene have been reported to be both more and less antisocial depending whether they are exposed to childhood maltreatment [36]. In addition to XOR relations, GE interaction effect could manifest in a conditional dominant fashion, where an additive pattern of genetic effect is observed when the environmental exposure is absent. But, when the environmental exposure is present, the genetic effect is enhanced and immediately plateaus, producing a dominant pattern of inheritance. A third type of non-linear GE relation is the small marginal effect interaction. This GE interaction is the most difficult to detect because modest genetic effect (e.g. effects produced by recessive pattern of inheritance) will be triggered only when an environmental exposure is present.

It is clear that using regression product terms to model interactions is only theoretically appropriate when the interaction pattern is linear, and hence this is a strong assumption that may not be suitable for non-linear scenarios. Nonparametric approaches have been developed to relax this assumption. For example, the partition-based score I (PBI) test evaluates hypothesized interactions between categorical factors by comparing data sets partitioned using different combinations of predictor variables [34, 35]. The significance of interactions is assessed by comparing the outcome explanatory powers of different partitioning variable combinations, and so the test does not assume specific interaction relationships between the factors [34, 35].

In this study, we evaluated potential GE interactions between the IGF pathway genes (IGF-1, IGFALS) and environmental factors (physical activity, sleep duration and daycare attendance) in the context of a longitudinal family study. Data were obtained from the Quebec Newborn Twin Study (QNTS) which followed a birth cohort comprised of twin pairs from Montreal, Canada, who were born between 1995 and 1998 [37]. A variety of social, biological and psychological measures on the QNTS participants were obtained from shortly after birth to early adolescent years [37, 38]. As the analysis strategy for this type of study is unclear due to complex longitudinal-familial correlations and non-linear interactions, we first simulated data based on the characteristics of the QNTS participants, and systematically evaluated the performances of three analytical methods (the linear mixed model, the twin study model and the PBI test) for detecting different GE interaction relations in longitudinal family data. Specifically, we assessed model performances with respect to the effect of simplifying correlation structures and their robustness under non-linear interaction scenarios. Next, we applied the considered models to test for potential IGF pathway GE interaction effect on body mass index (BMI) measured longitudinally in QNTS.

## Methods

### The Quebec newborn twin study

Data for this study were obtained from the Quebec Newborn Twin Study (QNTS) which followed twin pairs recruited from Montreal, Canada, who were born between 1995 and 1998 [37]. The studied population excluded twins with major illness at birth or those who died before 5 months of age [38, 39]. Zygosity was determined using a multitude of evidence including chorionicity data, physical similarity as well as genotype data [37, 39]. QNTS collects data on a variety of social, biological and psychological measures through medical records, interviews, and laboratory assessments. The follow-up assessment is still ongoing with longitudinal data available from shortly after birth and to early adolescent years [37, 38]. Separate data collection personnel were assigned for each individual within a twin pair to control for bias due to knowledge of zygosity status [37]. Details on the QNTS study can be found in Boivin et al. [37]. The overall structure of QNTS data consists of repeated measures for individuals nested within families (twin pairs).

### Statistical analysis

We investigated three different analytical methods for longitudinal family studies. Each method uses a combination of different approaches for modeling correlation structure and interaction relationships, as outlined below. All analyses were performed using R [40].

#### Twin model

*Y*_{ij} represents the BMI outcome for twin pair *i*, individual *j*. **x**_{ij}* β* is the systematic component of the model, which includes the design matrix predictor values (

**x**_{ij}) and its associated fixed effects (

*). The random variation in the outcome is modeled by*

**β***A*

_{ij},

*C*

_{ij}, and

*E*

_{ij}terms, which are mutually independent standard normal random variables. The

*a*,

*c*,

*e*terms are the pathway coefficients that reflect the partitioning of the outcome variance due to background additive genetic effect (

*a*), common environment influence (

*c*) and random environment variation (

*e*). Each of the variance components is equal to its path coefficient squared. We used the

*twinlm*function from the

*mets*R package to fit the model [42].

In order to analyze repeated measures using the twin model, we summarized the outcome measures (BMI) for each individual by their averages across the time points. The variance partitioning setup of the model is able to accurately account for the difference in correlations between MZ and DZ twins as described in the introduction. However, it is not currently possible to model the correlation due to longitudinal measurements in the twin model. Since the systematic component of the twin model is formulated as a typical linear regression model, it will assume a linear interaction relationship by using a multiplicative term for the interaction effect. In addition to an additive genetic model (0, 1, 2 for the number of minor alleles), we also used a co-dominant specification for the genetic effect. Under a co-dominant model, heterozygotes and minor allele homozygotes were represented using separate indicator variables with the common allele homozygotes as the reference category. This allows for a more flexible interaction model.

#### Linear mixed model

The linear mixed model approach considered in this study was implemented using the *lmekin* function from the *coxme* R package [43]. The linear mixed model utilizes all of the repeated measures and models longitudinal correlation via individual random effect [44]. Each individual receives a random intercept to induce correlation among his/her repeated outcomes. The correlation due to different family structure is accounted for by using a kinship matrix to specify the covariance structure of the random effect. The entries in the kinship matrix are kinship coefficients that reflect genetic relatedness between individuals. These kinship coefficients will specify the covariance of individual random effect with self and with others (See Section S1, Additional file 1 for details on kinship matrix construction). The linear mixed model is a regression-based method and will implicitly assume linear interaction when using multiplicative term to represent GE interaction effect. As with the twin model, we specified the genetic effect using additive and co-dominant coding. Interactions between genotype status and the environmental variable were modeled using multiplicative terms. *P*-values for the fixed effects were based on a Wald test or a likelihood ratio test if the effect was coded using multiple indicator variables.

#### Partition-based score I test

The sub-datasets generated from the partitioning process is denoted by *i*, where *i* = 1, 2…*k*. \( {\overline{y}}_i \) is the mean outcome for the *i*^{th} partitioned sub-dataset. *n*_{i} is the sample size for the *i*^{th} sub-dataset. \( \overline{y} \) and \( {S}_y^2 \) are overall outcome mean and sample variance respectively. *n* is the overall sample size.

To evaluate a potential GE interaction, we estimate the dispersion statistics for a dataset that is partitioned by both genetic and environmental variables (*I*_{GE}) and by each variable separately (*I*_{G}, *I*_{E}). The test statistic (*I*_{T}) in this case is the difference between *I*_{GE} and the maximum of *I*_{G}, *I*_{E}. The *p*-value of the test is estimated using permutation. The permutation procedure accounts for familial correlation by constraining the permutation step to within each family. In this study, the test p-value was estimated with 10,000 permutation replications.

The PBI test is not designed to utilize repeated outcome measures. In order to analyze longitudinal data using the PBI test, we use the average BMI over time as a summary measure for each individual. To allow dataset division, the predictors specifying a given partition scheme must be categorical. Any continuous predictors would need to be categorized before applying the test. The PBI test is nonparametric and does not assume linear interaction relationship.

### Simulation analysis

Simulated BMI trajectories for 788 individuals (226 DZ twins, 168 MZ twins) were generated with input predictors that were partially based on their corresponding QNTS variables. Actual QNTS data on the individual’s family structure, zygosity, sex and age were used for the simulation input. Missing data on age were imputed by randomly sampling the age distribution of the whole sample at the missing time point.

Hypothetical genetic and environmental factor data were generated using probability models. The environmental factor was coded as either present (1) or absent (0), and was sampled from a Bernoulli distribution independently for each individual with exposure frequency set to 0.3. The genetic factor was coded to reflect additive genetic effect (0, 1, and 2 for the number of minor alleles). Hypothetical parental genotypes for each individual were generated as the sum of two independent Bernoulli random variables, thus assuming random mating. The minor allele frequency was set to 0.3. Individual genotype data was then obtained from parental genotypes using probabilities according to Mendelian inheritance pattern.

*f*( ) and

*h*( ) assign individual covariate values for the interaction effect according to the specified interaction scenarios (Fig. 1).

*θ*_{ijk} determines the simulated GE interaction effect on the outcome for each individual at each time point. The effect pattern is specified using an interaction matrix describing the combined interactive effect of the genetic factor and the environmental factor (Fig. 1). We simulated scenarios corresponding to the four interaction relationships discussed in the introduction. *β*_{GE} and *β*_{GTE} represent the interaction effect between gene and environment (*GE*) and gene-time-environment (*GTE*) respectively.

*Y*_{ijk} is the BMI trait value for individual *j* of the *i*^{th} twin pair at time point *k*. *β*^{′}*s* with the corresponding subscripts represents fixed effects for age in months (*T*_{ijk}), sex (*S*_{ij}), the genetic factor (*G*_{ij}) and the environmental factor (*E*_{ij}). *β*_{GT} specifies the linear interaction effect between the genetic factor (*G*_{ij}) and time (*T*_{ij}).

*T*′

_{ijk}value is assigned as follows:

Based on this specification, an additional time effect from \( {\beta}_{T^{\prime }} \) is applied after 6 months of age (time point, *k* > 2). This replicates the initial phases of fast growth before 6 months and the subsequent plateauing of BMI afterwards as observed in QNTS data.

*C*

_{oij}and

*C*

_{Tij}are the random effects on the intercept and the rate of change of BMI over time, respectively, for each individual. The effects are simulated as components of a bivariate normal random vector for each twin pair. The covariance structure of the random vector is set up to reflect the difference in familial correlation between MZ and DZ twins due to background additive genetic effect.

Parameters \( {\sigma}_A^2 \) and \( {\tau}_A^2 \) represent the additive genetic effect on BMI correlation while \( {\sigma}_C^2 \) and \( {\tau}_A^2 \) specify the common environmental effect on the correlation.

*β*

_{GTE}and

*β*

_{GE}). See Table 1 for details on simulation parameterization.

Parameter configuration for simulation scenarios

Parameter | Gene-environment interaction effect modeled | |||||
---|---|---|---|---|---|---|

No Effect | Effect on Average | Effect on Change | ||||

No Effect on Average | No Effect on Change | Linear Interaction | Non-linear Interaction | Linear Interaction | Non-linear Interaction | |

β | 11 | 11 | 11 | 11 | 11 | 11 |

β | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |

β | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |

β | −0.8 | −0.8 | − 0.8 | −0.8 | − 0.8 | −0.8 |

β | 0 to 1 | 0 | 0.25 | 0 | 0 | 0 |

β | 0 | 0 to 0.03 | 0 | 0 | 0.01 | 0 |

β | 0 to 2 | 0 to 1.2 | 0.5 | 0 | 0.5 | 0 |

σ | 3 | 3 | 3 | 3 | 3 | 3 |

σ | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |

τ | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |

τ | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |

σ | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |

β | 0 | 0 | 0.1 to 1 | 0.1 to 1 | 0 | 0 |

β | 0 | 0 | 0 | 0 | 0.001 to 0.03 | 0.001 to 0.03 |

For each simulation scenario, we applied the analytical models to 2000 simulated dataset replicates. The power of each analysis method to detect GE interactions was estimated as the proportion of significant results (*p*-value < 0.05) over the 2000 replicates. Significance tests were performed on the interaction terms (*β*_{GE} and *β*_{GTE}) for regression-based models and on the PBI test statistic. For null interaction scenarios, the proportion of significant results (p-value < 0.05) was used to estimate the type 1 error rate. For the twin and the linear mixed models, we adjusted for sex, age, gene and environment main effects in the model.

### IGF pathway GE interaction analysis

To assess GE interactions between the IGF pathway genes (IGF-1, IGFALS) and environmental factors (physical activity, sleep duration and daycare attendance), we analyzed actual QNTS data on a sample of 536 individuals from 292 families (143 MZ twins, 149 DZ twins). The initial sample had 810 individuals with available environmental data, in which 682 individuals also had sequencing data. Details on the analysis sample selection are in Section S1, Additional File 1.

Exon Sequencing data on the IGF-1 and IGFALS genes were obtained using the Illumina HiSeq 2500 platform at McGill University and Génome Québec Innovation Centre. Molecular Inversion Probe (MIP) method was used to construct DNA libraries for which deep sequencing was carried out. We focused our analysis on common single nucleotide polymorphism (SNP) variants and excluded those whose minor allele frequencies (MAF) were less than 0.05. Data quality control exclusions including sequencing quality, missing data proportion (> 10%) and Hardy-Weinberg Equilibrium (HWE) test (*p*-value < 0.01) were also applied. SNPs with highest MAF were selected from haplotypes that are in linkage disequilibrium (R^{2} > 0.8). The final analysis was performed on 7 SNPs from the IGF-1 gene and 2 SNPs from the IGFALS gene. Sequencing data was coded according to the additive genetic effect model where the number of the minor alleles is counted (0, 1, and 2).

BMI data were obtained for each individual at 6 time points from birth to around 6 years of age. Data were collected using medical record (at birth), laboratory assessment (6 month and 62 month follow-up) and interview (all other follow-up) [38]. 99 individuals were excluded for missing more than 4 out of the 6 BMI measurements. We also filtered out 6 BMI measures from 6 individuals that were judged to be unrealistically high/low and likely measurement or recording errors. BMI data was treated as a continuous variable without any recoding.

Zygosity status was coded dichotomously as either 0 (DZ twins) or 1 (MZ twins). Individual age was recorded as number of months allowing decimals to account for partial month. We did not differentiate between different gestational ages among individuals, and set all ages to be zero at birth. Sex was coded as binary with 0 being female and 1 being male.

Interviews were conducted at the follow-up time points to obtain information on environmental exposures. We collapsed them into a single summary measure per individual, as described below. Physical activity level was assessed only at 32 and 50 months follow-up where parents were asked to rate the physical activity level of the study participant relative to his/her peers of same age and sex. Since the majority of responses remained unchanged between the two assessments, we only used the 32-month follow-up data in our analysis as it is the midpoint of the follow-up period. The responses were collapsed into a 3-level categorical variable (“more or a lot more”, “equal” and “less or a lot less”) with the most active category as the baseline. Extreme categories were combined due to low counts.

Information on daycare attendance was obtained through parental interview at 4 time points (6, 20, 32, 50 months of age). Attendance status was assessed by asking the parents whether the participant was using daycare or other babysitting services including care by relative at the time of interview. We summarized the overall daycare attendance for an individual by the proportion of his/her follow-up time where the individual attended daycare service. If the response was “yes” at any given time point, we assumed that the participants attended daycare service for the full duration of time until the next follow-up point. Attendance status was excluded if we could not calculate the time between two follow-up points due to missing data for age. The analysis variable was a continuous proportion ranging from 0 to 1.

Individual sleep time was measured by two parental interview questions on day and night sleep times, in which parents were asked to describe the amount of time the participants slept during day and night time. An individual’s overall sleep time at each time point was calculated as the sum of his/her day and night sleep durations in hours (See Section S1, Additional file 1 for details on deriving total sleep time data). We then scored each individual on whether his/her total sleep time met the minimum recommended level from the American Academy of Sleep Medicine (See Section S1, Additional file 1) and endorsed by the American Academy of Pediatrics [45, 46]. Finally, since sleep time data were available for 4 follow-up time points (6, 20, 32, 50 months of age), we summarized individual sleep duration status as the proportion of follow-up time where the subject’s total sleep time met the minimum recommended level. Follow-up proportion was calculated similarly as daycare service attendance.

We used individual’s reported race as a measure of their ethnic background. 8% of the responses did not consider themselves to be Caucasian (“white”). The MAF for the IGF-1 and IGFALS SNPs were markedly different for Caucasian and non-Caucasian individuals (See Section S1, Additional file 1). We thus excluded 47 individuals with non-Caucasian ethnicity from our analysis in order to control for confounding due to ethnicity (population stratification).

Univariate analyses were conducted to obtain sample distributions for the variables. We compared the distributions of environmental exposures and other covariates between the filtered sample used in our analysis and the initial QNTS data sample. Depending on the variable type, Chi-squared test or ANOVA test were applied to BMI, age, zygosity, sex, physical activity, daycare attendance, sleep duration and race. The previously described twin model and the linear mixed model were fit to assess potential GE interactions between each SNP-environmental factor pair. The interaction was modeled with a multiplicative term in the regression equation. Both the twin model and the linear mixed model adjusted for sex in addition to genetic and environmental predictors. The time effect was modeled as a segmented trend in the linear mixed model with a knot placed at age = 6 months (approximately the 2nd follow-up time point). The PBI test was performed to evaluate interaction effects between each SNP-environmental factor pair. Continuous environmental exposures were categorized according to their quartile levels to allow dataset partitioning with the PBI test. For each method, Bonferroni multiple comparison adjustment was made for GE interaction tests involving the same environmental exposure (number of tests = 9). Goodness of fit for the twin model and the linear mixed model was assessed by their residual plots. Sensitivity analyses were conducted to assess the effect of excluding impossible BMI values and non-Caucasian individuals on our conclusions.

## Results

### Detecting GE interactions in longitudinal family data

We simulated two sets of scenarios, where the interaction effect was either on the average or on the rate of change in BMI over time. In this section, we present results from the additive genetic effect coding for the linear mixed model and the twin model. The additive and co-dominant model specifications yielded qualitatively similar results and thus similar conclusions regarding the comparison of the analytical methods. Results from the analysis using the co-dominant specification are shown in Supplementary Section S2.

*β*

_{G}from 0.1 to 0.4 and

*β*

_{E}from 0.2 to 0.8). At higher main effect sizes (

*β*

_{G}> 0.4 and

*β*

_{E}> 0.8), the false positive rate decreased, and the test became more conservative in those scenarios. For the null GTE interaction scenario, the PBI test’s estimated type 1 error rate increased as the GT interaction and the environmental factor effects increased. This increase in false positives plateaued when

*β*

_{GT}= 0.015 and

*β*

_{E}= 0.6, and stabilized at a false positive rate of around 0.5.

From our simulation analysis, we observed unusual behavior for the PBI test. The test was either too conservative or very prone to false positives under different scenarios. Since the PBI test statistic is dependent on the dispersion statistic values (I_{GE}, I_{E} and E_{G}) calculated for different ways of partitioning the dataset, we monitored the values of those statistics for different simulation parameter values. In scenarios where the PBI test behaved erratically, partitioning the dataset by either genetic or environmental factor alone achieved comparable or higher outcome explanatory performance than partitioning by both gene-environment variables. Subsequently this affected the PBI test statistic and its significance. Detailed results can be found in Section S2, Additional file 1.

### IGF pathway GE interaction effect on BMI

Characteristics of the analysis sample

No. of individuals | Proportion or Mean (SD) | |
---|---|---|

Individuals | 536 | |

Individual average BMI | 536 | 15.09 (1.59) |

Age | ||

At birth | 536 | 0 (0) |

Follow-up #1 | 536 | 6.28 (0.74) |

Follow-up #2 | 531 | 19.49 (0.75) |

Follow-up #3 | 497 | 31.77 (0.96) |

Follow-up #4 | 435 | 49.85 (1.82) |

Follow-up #5 | 478 | 62.25 (3.23) |

Zygosity | ||

DZ twin | 149 | 0.51 |

MZ twin | 143 | 0.49 |

Sex | ||

Female-female twin | 122 | 0.42 |

Male-male twin | 102 | 0.35 |

Female-male twin | 68 | 0.23 |

Physical Activity | ||

More | 156 | 0.37 |

Equal | 253 | 0.59 |

Less | 17 | 0.04 |

Individual proportion of follow-up attending daycare facility | 530 | 0.42 (0.37) |

Individual proportion of follow-up with sufficient sleep | 524 | 0.57 (0.31) |

Race | ||

Caucasian | 518 | 1 |

Other | 0 | 0 |

## Discussion

In this study, we assessed the theoretical performance of three longitudinal family methods for detecting GE interactions, and we applied these methods to data from QNTS in order to evaluate the joint effect of the IGF pathway genes (IGF-1, IGFALS) and environmental factors (physical activity, daycare attendance and sleep duration) on childhood obesity. Both the simulation analysis and the QNTS data analysis have produced results highlighting the challenges of modeling complex correlation and interaction relationships. When reasonable approximation of the differences between individual BMI trends was achieved, simplification of longitudinal data structure by averaging the outcomes over different time points did not negatively impact the performance. The analytical models had different detection powers when the GE interactions were non-linear. This pattern of performances suggested that our methods were not robust to interaction model misspecification, and fitting the correct interaction relation in a given model is important to its performance. The analysis of the QNTS data did not reveal any statistically significant GE interactions for the IGF pathway genes after correction for multiple testing. The suggestive interaction between the IGF-1 variant at position 102,791,894 of chromosome 12 and physical activity may serve as hypothesis for further studies.

Longitudinal correlation was modeled by the linear mixed model as this model allows use of all of the available data points from each individual. However, we found that summarizing the repeated outcomes by their mean and applying the cross sectional twin study model had higher power to detect GE interactions. Other studies have also demonstrated good power for detecting genetic main effects using methods that summarize individual longitudinal outcomes with their averages [33, 47]. Mechanistically, the high power of using the averaging method may be attributed to the fact that the mean statistic can retain relevant information while reducing random noise. This is because of its formulation as a weighted sum of data points, the mean statistic can therefore account for the effect from each repeated measure and produce better representation of any systematic pattern. An example to illustrate the importance of this averaging procedure to method performance is contrasting with analysis using only one of the repeated outcomes, which has resulted in lower power [32, 47, 48]. This difference in performance between the two simplification approaches could be due to the fact that when compared to a single time point, using the mean over time was able to preserve more information from the original longitudinal measures while minimizing random noise. At the same time, using mean statistics can simplify the longitudinal correlation structure while retaining important information from the original data set. In this way, averaging repeated outcomes can be an optimal compromise between accuracy and parsimony when modeling longitudinal data, and may contribute to its better performance over the more accurate linear mixed model. Considering these results, it appears that simplifying longitudinal correlation with mean statistics is able to achieve good performance in scenarios with simple longitudinal data pattern. At the same time, it is possible for more complex longitudinal trajectories to occur in nature. Genetic and environmental effects on outcome may be variable across time. In these cases, averaging outcome values across time could lead to loss of information and a decrease in statistical power.

Because of GE interaction’s potentially complex nature, we should consider how much information would be lost if a simple interaction model is imposed on data from a more complex gene-environment relationship. Unlike single factor effects, GE interactions represent multi-dimensional relationships between several factors. The multiplicative term commonly used in regression models to represent interactions will not be reflective of all possible relationships, since it only accurately portrays linear trends. Including additional higher order quadratic interaction terms in the model may capture a specific type of complex GE interactions, but this type of modeling is not always done [49]. In our analysis, the performance of regression approaches (the twin model and the linear mixed model) dropped whenever the interaction scenario was not linear. This suggested that the erroneous assumption of a linear relationship was not reasonable, and may result in loss of power when imposed on a non-linear scenario.

In addition to the loss of power observed for regression methods under non-linear interactions, the nonparametric PBI test also had low robustness to different interaction relations. Lower detection power was observed for the PBI test when the underlying interaction model differed from its best-case scenario (XOR interaction). This means that the performances of all three methods tested in this study were sensitive to changing interaction relations in the data. Specialized methods may be needed for specific interaction scenarios in order to achieve adequate detection power.

An interaction that was significant before adjustment was between a variant in IGF-1 at chromosome 12 position 102,791,894 and physical activity. It was detected by the twin model (*p* = 0.034) and had near significant *p*-value under the linear mixed model (0.065). This SNP was not documented in the dbSNP database, and is positioned outside the protein coding region of the IGF-1 gene. If there is an actual interaction effect, the variant may influence IGF-1 through gene regulation mechanisms. The effect of physical activity on the IGF pathway may be non-linear, since there is evidence for a threshold-dependent pattern of stimulation on the GH signaling by physical activity [19, 20]. If physical activity interacts with the IGF-1 gene in a similar manner, then the joint effect pattern may not be adequately captured with the methods used in this study. Thus, further characterization of this variant and its interplay with physical activity is required before making any concrete conclusions.

Our study had limitations that should be noted when considering the result. For simulation scenarios, we made several simplifying assumptions that could potentially limit the generalizability of our findings. For example, the environmental exposure and the genetic effect were simulated to be either constant or monotone changes over time. In reality, it is possible for more complex longitudinal trajectories. In this study, we focused our simulation design effort on the variability of the GE interaction relationships. We had considered several representative and plausible interaction relationships that might be encountered in nature. Scenarios such as the XOR relationships are not commonly examined in the context of GE interactions. The result of our study highlighted the poor robustness of the studied methods to non-linear interactions and could serve as starting point for future investigations with different GE interaction or longitudinal effect patterns. The analysis of the actual QNTS data was also limited by data constraints. For example, environmental exposure data were collected using interview questionnaires. Potential measurement error on environmental factors due to the usage of interview questionnaire can influence statistical power to detect GE interactions. Wong et al. (2003) showed that studies with repeated and precise measurements of exposure and outcome variables can have as much powerful to detect GE interactions as studies with 20 times the sample size [50]. Thus, the statistical power of our study may be limited by its moderate sample size and potentially imprecise measurements of environmental exposures. Because of the gaps in the available data and lack of adequate statistical models, we were also not able to assess the environmental effects as time-varying. At the same time, the analysis procedure taken by this study has low potential for significant selection bias, as our analysis sample was not statistically different from the whole QNTS data (See Section S1 Table S1.1, Additional file 1). Population stratification was also controlled via restricting analysis to Caucasian individuals. Thus the results should be treated as exploratory in nature, and the putative GE interaction between the IGF-1 variant and physical activity represents an interesting hypothesis that warrants further investigation.

## Conclusion

Using longitudinal family studies to investigate GE interactions holds great potential for increasing our understanding of childhood obesity etiology. However, when analyzing longitudinal family data, the methodological issues raised in this study should be considered. Although simplifying the over time repeated outcomes with their averages worked fairly well, all of the methods considered in this study were not robust to misspecification of the interaction relationship. This highlights the need for more robust methods when studying GE interactions in the longitudinal family context. Equally important, characterization of how different GE interaction relationships influence method performance is also needed. Future study design should give more consideration to the inherent complexities of GE interactions. These lessons could be applied when performing further studies on the putative interaction between the IGF-1 variant and physical activity, as suggested by our result.

## Notes

### Acknowledgements

We are grateful to the children and parents of the Quebec Newborn Twin Study (QNTS).

### Funding

This work was supported by the Natural Sciences and Engineering Research Council of Canada (NSERC) and by the Canadian Institute of Health Research (CIHR). CIHR supported the data collection. NSERC supported students and staff who worked on the analysis, interpretation of results, and on the manuscript writing.

### Availability of data and materials

The simulation data that support the findings of this study are available from the corresponding author upon reasonable request. The Quebec Newborn Twin Study data that support the findings of this study are available from Dr. Lise Dubois but restrictions apply to the availability of these data, which were used under license for the current study, and so are not publicly available.

### Authors’ contributions

CW designed the study, performed data analysis and wrote the manuscript. JFL performed programming for the simulation study and revised the manuscript. LD provided the QNTS data and guided the writing of the manuscript. MHRG and KMB designed the study and guided the analysis and the writing of the manuscript. All authors reviewed and approved the final manuscript.

### Ethics approval and consent to participate

Approval by the Ethics Committees of the Sainte-Justine Hospital Research Centre was obtained before each data collection. All participants and parents signed informed assent and consent forms, respectively.

### Consent for publication

Not Applicable.

### Competing interests

The authors declare that they have no competing interests.

### Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

## Supplementary material

## References

- 1.Freedman DS, Khan LK, Serdula MK, Dietz WH, Srinivasan SR, Berenson GS. The relation of childhood BMI to adult adiposity: the Bogalusa heart study. Pediatrics. 2005;115:22–7.CrossRefGoogle Scholar
- 2.Han JC, Lawlor DA, Kimm SYS. Childhood obesity. Lancet. 2010;375:1737–48.CrossRefGoogle Scholar
- 3.Chesi A, Grant SFA. The genetics of pediatric obesity. Trends Endocrinol Metab. 2015;26:711–21.CrossRefGoogle Scholar
- 4.Bjørge T, Engeland A, Tverdal A, Smith GD. Body mass index in adolescence in relation to cause-specific mortality: a follow-up of 230,000 Norwegian adolescents. Am J Epidemiol. 2008;168:30–7.CrossRefGoogle Scholar
- 5.Pulgarón ER. Childhood obesity: a review of increased risk for physical and psychological comorbidities. Clin Ther. 2013;35:A18–32.CrossRefGoogle Scholar
- 6.John J, Wolfenstetter SB, Wenig CM. An economic perspective on childhood obesity: recent findings on cost of illness and cost effectiveness of interventions. Nutrition. 2012;28:829–39.CrossRefGoogle Scholar
- 7.Kuhle S, Kirk S, Ohinmaa A, Yasui Y, Allen AC, Veugelers PJ. Use and cost of health services among overweight and obese Canadian children. Int J Pediatr Obes. 2011;6:142–8.CrossRefGoogle Scholar
- 8.Fu W, O’Connor TD, Akey JM. Genetic architecture of quantitative traits and complex diseases. Curr Opin Genet Dev. 2013;23:678–83.CrossRefGoogle Scholar
- 9.Waalen J. The genetics of human obesity. Transl Res. 2014;164:293–301.CrossRefGoogle Scholar
- 10.Güngör NK. Overweight and obesity in children and adolescents. J Clin Res Pediatr Endocrinol. 2014;6:129–43.CrossRefGoogle Scholar
- 11.Ladabaum U, Mannalithara A, Myer PA, Singh G. Obesity, Abdominal Obesity, Physical Activity, and Caloric Intake in US Adults: 1988 to 2010. Am. J. Med. 2014;127:717–27 e12.CrossRefGoogle Scholar
- 12.McAllister EJ, Dhurandhar NV, Keith SW, Aronne LJ, Barger J, Baskin M, et al. Ten putative contributors to the obesity epidemic. Crit Rev food Sci Nutr. 2009;49:868–913.CrossRefGoogle Scholar
- 13.Domené HM, Hwa V, Argente J, Wit JM, Wit JM, Camacho-Hübner C, et al. Human acid-labile subunit deficiency: clinical, endocrine and metabolic consequences. Horm Res. 2009;72:129–41.CrossRefGoogle Scholar
- 14.Garten A, Schuster S, Kiess W. The insulin-like growth factors in Adipogenesis and obesity. Endocrinol Metab Clin N Am. 2012;41:283–95.CrossRefGoogle Scholar
- 15.Domené HM, Bengolea SV, Jasper HG, Boisclair YR. Acid-labile subunit deficiency: phenotypic similarities and differences between human and mouse. J Endocrinol Investig. 2005;28:43–6.Google Scholar
- 16.Payet LD, Firth SM, Baxter RC. The role of the acid-labile subunit in regulating insulin-like growth factor transport across human umbilical vein endothelial cell monolayers. J Clin Endocrinol Metab. 2004;89:2382–9.CrossRefGoogle Scholar
- 17.Janosi JB, Firth SM, Bond JJ, Baxter RC, Delhanty PJ. N-linked glycosylation and sialylation of the acid-labile subunit. Role in complex formation with insulin-like growth factor (IGF)-binding protein-3 and the IGFs. J Biol Chem. 1999;274:5292–8.CrossRefGoogle Scholar
- 18.Twigg SM, Baxter RC. Insulin-like growth factor (IGF)-binding protein 5 forms an alternative ternary complex with IGFs and the acid-labile subunit. J Biol Chem. 1998;273:6074–9.CrossRefGoogle Scholar
- 19.Sherlock M, Toogood AA. Aging and the growth hormone/insulin like growth factor-I axis. Pituitary. 2007;10:189–203.CrossRefGoogle Scholar
- 20.Stokes K. Growth hormone responses to sub-maximal and sprint exercise. Growth Hormon IGF Res. 2003;13:225–38.CrossRefGoogle Scholar
- 21.Nindl BC, Pierce JR. Insulin-like growth factor I as a biomarker of health, fitness, and training status. Med Sci Sports Exerc. 2010;42:39–49.CrossRefGoogle Scholar
- 22.Van Cauter E, Latta F, Nedeltcheva A, Spiegel K, Leproult R, Vandenbril C, et al. Reciprocal interactions between the GH axis and sleep. Growth Horm. IGF Res. 2004;14(Suppl A):S10–7.Google Scholar
- 23.Gibson TL, Cohen P. Inflammation-related neutrophil proteases, cathepsin G and elastase, function as insulin-like growth factor binding protein proteases. Growth Hormon IGF Res. 1999;9:241–53.CrossRefGoogle Scholar
- 24.Brady MT. Infectious disease in pediatric out-of-home child care. Am J Infect Control. 2005;33:276–85.CrossRefGoogle Scholar
- 25.Geoffroy M-C, Power C, Touchette E, Dubois L, Boivin M, Séguin JR, et al. Childcare and overweight or obesity over 10 years of follow-up. J. Pediatr. 2013;162:753–8 e1.CrossRefGoogle Scholar
- 26.Strangert K. Respiratory illness in preschool children with different forms of day care. Pediatrics. 1976;57:191–6.PubMedGoogle Scholar
- 27.Bartlett AV, Moore M, Gary GW, Starko KM, Erben JJ, Meredith BA. Diarrheal illness among infants and toddlers in day care centers. II. Comparison with day care homes and households. J. Pediatr. 1985;107:503–9.CrossRefGoogle Scholar
- 28.Fan R, Zhang Y, Albert PS, Liu A, Wang Y, Xiong M. Longitudinal association analysis of quantitative traits. Genet Epidemiol. 2012;36:856–69.PubMedPubMedCentralGoogle Scholar
- 29.Chen H, Malzahn D, Balliu B, Li C, Bailey JN. Testing genetic association with rare and common variants in family data. Genet Epidemiol. 2014;38:S37–43.CrossRefGoogle Scholar
- 30.Wu Z, Hu Y, Melton PE. Longitudinal data analysis for genetic studies in the whole-genome sequencing era. Genet. Epidemiol. 2014;38(Suppl 1):S74–80.CrossRefGoogle Scholar
- 31.Barnholtz-Sloan JS, Poisson LM, Coon SW, Chase GA, Rybicki BA. Analysis of gene x environment interactions in sibships using mixed models. BMC Genet. 2003;4(Suppl 1):S18.CrossRefGoogle Scholar
- 32.Sung YJ, Simino J, Kume R, Basson J, Schwander K, Rao DC. Comparison of two methods for analysis of gene-environment interactions in longitudinal family data: the Framingham heart study. Front Genet. 2014;5:9.CrossRefGoogle Scholar
- 33.Burkett KM, Roy-Gagnon M-H, Lefebvre J-F, Wang C, Fontaine-Bisson B, Dubois L. A comparison of statistical methods for the discovery of genetic risk factors using longitudinal family study designs. Front Immunol. 2015;6:589.CrossRefGoogle Scholar
- 34.Satten GA, Biswas S, Papachristou C, Turkmen A, König IR. Population-based association and gene by environment interactions in Genetic Analysis Workshop 18. Genet. Epidemiol. 2014;38(Suppl 1):S49–56.CrossRefGoogle Scholar
- 35.Fan R, Huang C-H, Hu I, Wang H, Zheng T, Lo S-H. A partition-based approach to identify gene-environment interactions in genome wide association studies. BMC Proc. 2014;8:S60.CrossRefGoogle Scholar
- 36.Belsky J, Jonassaint C, Pluess M, Stanton M, Brummett B, Williams R. Vulnerability genes or plasticity genes? Mol. Psychiatry. 2009;14:746–54.Google Scholar
- 37.Boivin M, Brendgen M, Dionne G, Dubois L, Pérusse D, Robaey P, et al. The Quebec newborn twin study into adolescence: 15 years later. Twin Res Hum Genet. 2013;16:64–9.CrossRefGoogle Scholar
- 38.Dubois L, Ohm Kyvik K, Girard M, Tatone-Tokuda F, Pérusse D, Hjelmborg J, et al. Genetic and environmental contributions to weight, height, and BMI from birth to 19 years of age: an international study of over 12,000 twin pairs. Wang G, editor. PLoS One 2012;7:e30153.Google Scholar
- 39.Dubois L, Diasparra M, Bédard B, Kaprio J, Fontaine-Bisson B, Pérusse D, et al. Gene-environment contributions to energy and macronutrient intakes in 9-year-old children: results from the Quebec newborn twin study. Physiol Behav. 2013;119:30–7.CrossRefGoogle Scholar
- 40.R Core Team. R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria 2016.Google Scholar
- 41.Neale MC, Maes HH. Methodology for genetic studies of twins and families. Dordrecht, The Netherlands: Kluwer Academic Publishers B.V; 2004.Google Scholar
- 42.Holst KK, Scheike T. mets: Analysis of Multivariate Event Times. R package version 1.1.1. 2015.Google Scholar
- 43.Therneau TM. coxme: Mixed Effects Cox Models. R package version 2.2–5 2015.Google Scholar
- 44.Laird N, Ware J. Random-effects models for longitudinal data. Biometrics. 1982;38:963–74.CrossRefGoogle Scholar
- 45.Paruthi S, Brooks LJ, D’Ambrosio C, Hall WA, Kotagal S, Lloyd RM, et al. Recommended amount of sleep for pediatric populations: a consensus statement of the American Academy of sleep medicine. J Clin Sleep Med. 2016;12:785–6.CrossRefGoogle Scholar
- 46.Jenco M. AAP endorses new recommendations on sleep times. AAP News. 2016.Google Scholar
- 47.Hu Y, Hui Q, Sun YV. Association analysis of whole genome sequencing data accounting for longitudinal and family designs. BMC Proc. 2014;8:S89.CrossRefGoogle Scholar
- 48.Basson J, Sung YJ, de las Fuentes L, Schwander KL, Vazquez A, Rao DC. Three approaches to modeling gene-environment interactions in longitudinal family data: gene-smoking interactions in blood pressure. Genet. Epidemiology. 2016;40:73–80.Google Scholar
- 49.Aliev F, Latendresse SJ, Bacanu S-A, Neale MC, Dick DM. Testing for measured gene-environment interaction: problems with the use of cross-product terms and a regression model reparameterization solution. Behav Genet. 2014;44:165–81.CrossRefGoogle Scholar
- 50.Wong MY, Day NE, Luan JA, Chan KP, Wareham NJ. The detection of gene-environment interaction for continuous traits: should we deal with measurement error by bigger studies or better measurement? Int J Epidemiol. 2003;32:51–7.CrossRefGoogle Scholar

## Copyright information

**Open Access**This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.