Abstract
This article presents recent developments in flow configurations with built-in corrugated structures at the walls of the channels towards the improvement of convective transport of heat and a simultaneous reduction in thermodynamic irreversibility. The comprehensive reviews of the works related to entropy generation and heat transfer in the corrugated channels with and without the use of nanofluid are provided. Several aspects of different numerical, analytical, and experimental studies focusing on the underlying heat transfer and its consequences on the entropy generation using both nanofluids and conventional fluids are discussed. Also, a brief discussion on the entropy generation associated with the convective transport of heat in the corrugated microchannels, including the effect of corrugation configurations and nanofluids on the development of thermodynamic irreversibility is presented. The effects of different types of nanoparticles such as metallic, non-metallic, metal oxides, etc., have been discussed along with water, ethylene glycol, etc., as base fluids on the underlying thermo-hydrodynamics are discussed. We believe that this review article will provide a basis for the advanced research on the irreversibility analysis of the nanofluid in corrugated microchannels to improve the performance of the system involving the application of corrugated channels.
Similar content being viewed by others
Abbreviations
- CC:
-
Corrugated channel
- CMC:
-
Corrugated microchannel
- CWHF:
-
Constant wall heat flux
- CWT:
-
Constant wall temperature
- EG:
-
Entropy generation
- EGM:
-
Entropy generation minimization
- HF:
-
Heat flux (W/m2)
- HT:
-
Heat transfer
- MC:
-
Microchannel
- MCHS:
-
Microchannel heat sink
- NF:
-
Nanofluid
- TEG:
-
Total entropy generation
- TP:
-
Thermal performance
- \({S}^{{{\prime\prime\prime}}}\) :
-
Volumetric entropy generation rate (W/m3 K)
- \({S}_{\rm gen,FR}\) :
-
Friction entropy generation rate (W/K)
- \({S}_{\rm gen,HT}\) :
-
Heat transfer entropy generation rate (W/K)
- \({S}_{\rm gen}\) :
-
Entropy generation rate (W/K)
- \({q}_{\rm w}^{{{\prime\prime}}}\) :
-
Wall heat flux (W/m2)
- a :
-
Corrugation amplitude (m)
- C p :
-
Specific heat (J/kg K)
- D h :
-
Characteristic dimension or hydraulic diameter of the channel (m)
- d p :
-
Nanoparticle diameter (nm)
- H :
-
Channel height (m)
- h :
-
Convective heat transfer coefficient (W/m2 K)
- k :
-
Thermal conductivity (W/m K)
- l :
-
Total corrugation length (m)
- L :
-
Total length of the channel (m)
- L i :
-
Entrance length of the channel (m)
- L o :
-
Exit length of the channel (m)
- l w :
-
Corrugation wavelength (m)
- N :
-
Number of channels/tubes/microchannels
- q :
-
Heat transfer (W)
- R Th, Cond :
-
Thermal resistance due to conduction
- R Th, Conv :
-
Thermal resistance due to convection
- S n :
-
Entropy generation number
- T f :
-
Fluid temperature (K)
- T s :
-
Surface temperature (K)
- W :
-
Channel width (m)
- ΔP :
-
Pressure drop (kPa)
- Nu:
-
Nusselt number
- Kn:
-
Knudsen number
- Re:
-
Reynolds number
- Ag:
-
Silver
- Al2O3 :
-
Alumina
- Cu:
-
Copper
- CuO:
-
Copper oxide
- Fe3O4 :
-
Iron oxide black
- H2O:
-
Water
- SiO2 :
-
Silicon dioxide
- TiO2 :
-
Titanium oxide
- µ :
-
Dynamic viscosity (N s/m2)
- ρ :
-
Density (kg/m3)
- ϕ :
-
Particle concentration/volume fraction
References
C. Maradiya, J. Vadher, R. Agarwal, Beni-Suef University J. Basic Appl. Sci. 7(1), 1–21 (2018)
A. Bejan, A.D. Kraus, Heat Transfer Handbook 1 (Wiley, 2003).
M. Sheikholeslami, M. Gorji-Bandpy, D.D. Ganji, Renew. Sustain. Energy Rev. 49, 444–469 (2015)
A. Bergles, ASME J. Heat Transf. 119(1), 8–19 (1997)
A.E. Bergles, in Handbook of Heat Transfer ed. By W.M. Rohsenow, J.P. Hartnett, Y.I. Cho (McGraw-Hill, 1998), p. 11
A.E. Bergles, P.C.Jr. Wayner, Heat Transfer Enhancement (AccessScience. McGraw-Hill Education, 2002)
M. Bezaatpour, M. Goharkhah, Appl. Therm. Eng. 167, 114801 (2020)
T. Alam, M.H. Kim, Renew. Sustain. Energy Rev. 81, 813–839 (2018)
M.G. Varun, H. Nautiyal, S. Khurana, M.K. Shukla, Renew. Sustain. Energy Rev. 63, 193–225 (2016)
S.K. Agarwal, M.R. Rao, Int. J. Heat Mass Transf. 39(17), 3547–3557 (1996)
P. Sivashanmugam, S. Suresh, Appl. Therm. Eng. 26(16), 1990–1997 (2006)
H. Bucak, F. Yilmaz, Chemical Engineering and Processing-Process Intensification, 107929 (2020).
N. Kurtulmuş, B. Sahin, Int. Commun. Heat Mass Transfer 108, 104307 (2019)
A. Kumar, M.H. Kim, Appl. Therm. Eng. 89, 239–261 (2015)
I.A. Ghani, N.A.C. Sidik, N. Kamaruzaman, Int. J. Heat Mass Transf. 107, 21–44 (2017)
K. Kumar, R. Kumar, R.S. Bharj, Int. J. Exergy 31(1), 49–86 (2020)
D.B. Tuckerman, R.F.W. Pease, IEEE Electron Device Lett. 2(5), 126–129 (1981)
N.P. Gulhane, S.P. Mahulikar, Int. J. Heat Mass Transf. 52(7–8), 1980–1990 (2009)
S.P. Mahulikar, H. Herwig, O. Hausner, J. Microelectromech. Syst. 16(6), 1543–1556 (2007)
G.L. Morini, Heat Transfer Eng. 27(4), 64–73 (2006)
N.P. Gulhane, S.P. Mahulikar, Int. J. Therm. Sci. 49(5), 786–796 (2010)
R. Kumar, S.P. Mahulikar, Heat Transfer Asian Res 46(7), 1029–1040 (2017)
N.P. Gulhane, S.P. Mahulikar, Heat Transfer Eng. 33(8), 748–761 (2012)
P. Rosa, T.G. Karayiannis, M.W. Collins, Appl. Therm. Eng. 29(17–18), 3447–3468 (2009)
M.I. Hasan, H.M. Hasan, G.A. Abid, J King Saud Univ Eng Sci 26(2), 122–131 (2014)
M. Gal-el-Hak, ASME J Fluids Eng 121(1), 5–33 (1999)
M. Gad-el-Hak, ed., The MEMS Handbook (CRC Press 2001).
H. Heidary, M.J. Kermani, Int. Commun. Heat Mass Transfer 37(10), 1520–1527 (2010)
A. Bejan, Energy 5(8–9), 720–732 (1980)
M.A. Rosen, Int. J. Exergy 5(3), 249–274 (2008)
S.G. Kandlikar, W.J. Grande, Heat Transfer Eng. 24(1), 3–17 (2003)
G.V. Wang, S.P. Vanka, Int. J. Heat Mass Transf. 38(17), 3219–3230 (1995)
S.K. Mehta, S. Pati, J. Therm. Anal. Calorim. 136(1), 49–62 (2019)
G. Gaiser, V. Kottke, Phys. Fluids A 3, 1465–1465 (1991)
M.A. Ahmed, M.Z. Yusoff, K.C. Ng, N.H. Shuaib, Case Studies Thermal Eng 4, 65–75 (2014)
H.M. Bahaidarah, Numer Heat Transfer A Appl 51(9), 877–898 (2007)
Y. Islamoglu, Int. Commun. Heat Mass Transfer 35(5), 643–647 (2008)
P. Naphon, Int. Commun. Heat Mass Transfer 36(9), 942–946 (2009)
H. Pehlivan, I. Taymaz, Y. İslamoğlu, Int. Commun. Heat Mass Transfer 46, 106–111 (2013)
M.A. Ahmed, M.Z. Yusoff, K.C. Ng, N.H. Shuaib, Case Stud Thermal Eng 6, 77–92 (2015)
N. Tokgoz, B. Sahin, Int. Commun. Heat Mass Transfer 104, 41–50 (2019)
P. Dutta, P.P. Dutta, P. Kalita, Thermohydraulic Investigation of Different Channel Height on a Corrugated Heat Exchanger, in AIP Conference Proceedings, 2091(1), 020011 (2019).
R. Ferhat, A.Z. Dellil, K. Boualem, M. Hamidou, J. Heat Transfer, 141(8), (2019).
M. Salami, M. Khoshvaght-Aliabadi, A. Feizabadi, J. Therm. Anal. Calorim. 138(5), 3159–3174 (2019)
R.K. Ajeel, W.I. Salim, K. Sopian, M.Z. Yusoff, K. Hasnan, A. Ibrahim, A.H. Al-Waeli, Int. J. Heat Mass Transf. 145, 118806 (2019)
S. Singh, A. Singh, S. Chander, J. Energy Storage 25, 100896 (2019)
N. Kurtulmuş, B. Sahin, Int. J. Mech. Sci. 167, 105268 (2020)
S.U. Choi, J.A. Eastman, Enhancing Thermal Conductivity of Fluids with Nanoparticles, (No. ANL/MSD/CP-84938; CONF-951135–29), (Argonne National Lab., IL, United States 1995).
M.Z.A. Qureshi, M. Ashraf, Eur. Phys. J. Plus 133(2), 1–22 (2018)
S.K. Das, S.U. Choi, W. Yu, T. Pradeep, ed., Nanofluids: Science and Technology (Wiley, 2007).
S. Kakaç, A. Pramuanjaroenkij, Int. J. Heat Mass Transf. 52(13–14), 3187–3196 (2009)
J. Wu, J. Zhao, J. Lei, B. Liu, Appl. Therm. Eng. 101, 402–412 (2016)
S. Ahmad, M.I. Khan, T. Hayat, M.I. Khan, A. Alsaedi, Colloids Surf. A 554, 197–210 (2018)
R. Nasrin, N.A. Rahim, H. Fayaz, M. Hasanuzzaman, Renew Energy 121, 286–300 (2018)
A. Kumar, S. Subudhi, Appl. Therm. Eng. 160, 114092 (2019)
D. Dey, P. Kumar, S. Samantaray, Heat Transfer Asian Res. 46(8), 1413–1442 (2017)
A. Ghadimi, R. Saidur, H.S.C. Metselaar, Int. J. Heat Mass Transf. 54(17–18), 4051–4068 (2011)
N.A.C. Sidik, H.A. Mohammed, O.A. Alawi, S. Samion, Int. Commun. Heat Mass Transfer 54, 115–125 (2014)
D. Wen, G. Lin, S. Vafaei, K. Zhang, Particuology 7(2), 141–150 (2009)
R.B. Ganvir, P.V. Walke, V.M. Kriplani, Renew. Sustain. Energy Rev. 75, 451–460 (2017)
M. Jama, T. Singh, S.M. Gamaleldin, M. Koc, A. Samara, R.J. Isaifan, M.A. Atieh, J. Nanomater. 2016, 22 (2016)
H. Babar, H.M. Ali, Energy Convers. Manag. 202, 112194 (2019)
L. Yang, W. Ji, M. Mao, J.N. Huang, J. Clean. Prod. 257, 120408 (2020)
S.M.G. Babita, S.K. Sharma, S.M. Gupta, Exp. Thermal Fluid Sci. 79, 202–212 (2016)
W. Yu, H. Xie, J. Nanomater. 2012, 17 (2012)
B. Bakthavatchalam, K. Habib, R. Saidur, B.B. Saha, K. Irshad, J. Mol. Liquids, 112787 (2020).
N. Arora, M. Gupta, Renew. Sustain. Energy Rev. 134, 110242 (2020)
Y. Li, S. Tung, E. Schneider, S. Xi, Powder Technol. 196(2), 89–101 (2009)
S. Chakraborty, P.K. Panigrahi, Appl. Thermal Eng., 115259 (2020).
A. Bejan, Entropy Generation through Heat and Fluid Flow (Wiley, New York, 1982).
M. Vasudevaiah, K. Balamurugan, Int. J. Therm. Sci. 40(5), 454–468 (2001)
Y. Sui, C.J. Teo, P.S. Lee, Y.T. Chew, C. Shu, An efficient wavy microchannel heat sink for electronic devices. Heat Transfer Summer Conference 43567, 719–725 (2009)
L. Gong, K. Kota, W. Tao, Y. Joshi, Parametric numerical study of flow and heat transfer in microchannels with wavy walls. ASME-Int. Mech. Eng. Cong. Expos. 44441, 1365–1373 (2010)
A. Husain, K.Y. Kim, Heat Mass Transf. 47(1), 93–105 (2011)
H.A. Mohammed, P. Gunnasegaran, N.H. Shuaib, Int. Commun. Heat Mass Transfer 38(1), 63–68 (2011)
L. Gong, K. Kota, W. Tao, Y. Joshi, J. Heat Transfer, 133(5), (2011).
G. Xie, J. Liu, W. Zhang, B. Sunden, J. Electron. Pack., 134(4), (2012).
G. Xie, J. Liu, W. Zhang, B. Sundén, Numerical analysis of flow and thermal performance of a water-cooled wavy microchannel heat sink. ASME-Int. Mech. Eng. Cong. Expos. 45233, 1411–1417 (2012)
G. Xie, J. Liu, Y. Liu, B. Sunden, W. Zhang, J. Electron. Pack., 135(2), (2013).
P.K. Singh, H.F.S. Tan, C.J. Teo, P.S. Lee, Flow and heat transfer in branched wavy microchannels, in ASME-International Conference on Micro/Nanoscale Heat Transfer, 36154, V001T11A002 (2013).
A. Eltaweel, A. Baobeid, B. Tompkins, I. Hassan, Numerical investigation of heat transfer characteristics of a novel wavy-tapered microchannel heat sink, in ASME-Heat Transfer Summer Conference, 50336, V002T11A009 (2016).
L. Wang, Y. Jian, F. Li, Eur. Phys. J. Plus 131(9), 338 (2016)
L. Lin, J. Zhao, G. Lu, X.D. Wang, W.M. Yan, Int. J. Therm. Sci. 118, 423–434 (2017)
D. Toghraie, M.M.D. Abdollah, F. Pourfattah, O.A. Akbari, B. Ruhani, J. Therm. Anal. Calorim. 131(2), 1757–1766 (2018)
F.B.A. Hasis, P.M. Krishna, G.P. Aravind, M. Deepu, S.R. Shine, Int. J. Therm. Sci. 128, 124–136 (2018)
H. Ermagan, R. Rafee, Int. J. Therm. Sci. 132, 578–588 (2018)
H. Shen, Y. Zhang, C.C. Wang, G. Xie, Appl. Therm. Eng. 137, 228–237 (2018)
J. Rostami, A. Abbassi, J. Harting, Adv. Powder Technol. 29(4), 925–933 (2018)
R. Mashayekhi, E. Khodabandeh, O.A. Akbari, D. Toghraie, M. Bahiraei, M. Gholami, J. Therm. Anal. Calorim. 134(3), 2305–2315 (2018)
Y. Lei, Z. Chen, Int. J. Refrig 90, 46–57 (2018)
Z. Parlak, Heat Mass Transf. 54(11), 3317–3328 (2018)
D. Sreehari, A.K. Sharma, Int. J. Therm. Sci. 146, 106067 (2019)
G.D. Xia, Y.X. Tang, L.X. Zong, D.D. Ma, Y.T. Jia, R.Z. Rong, Int. Commun. Heat Mass Transfer 101, 89–102 (2019)
H. Bazdar, D. Toghraie, F. Pourfattah, O.A. Akbari, H.M. Nguyen, A. Asadi, J. Therm. Anal. Calorim. 139(3), 2365–2380 (2020)
J.F. Zhu, X.Y. Li, S.L. Wang, Y.R. Yang, X.D. Wang, Int. J. Therm. Sci. 146, 106068 (2019)
Y. Lei, Z. Chen, Int. J. Refrig 109, 64–81 (2020)
T.W. Ting, Y.M. Hung, N. Guo, J. Energy Res. Technol. 138(5), 052002 (2016)
S.S. Khaleduzzaman, M.R. Sohel, I.M. Mahbubul, R. Saidur, J. Selvaraj, Int. J. Heat Mass Transf. 101, 104–111 (2016)
N. Ahammed, L.G. Asirvatham, S. Wongwises, Int. J. Heat Mass Transf. 103, 1084–1097 (2016)
A.A. Alfaryjat, D. Stanciu, A. Dobrovicescu, V. Badescu, M. Aldhaidhawi, Numerical investigation of entropy generation in microchannels heat sink with different shapes, in IOP Conference Series: Materials Science and Engineering, 147(1), 012134 (2016).
P. Rastogi, S.P. Mahulikar, Int. J. Therm. Sci. 126, 96–104 (2018)
E. Manay, E.F. Akyürek, B. Sahin, Results Phys. 9, 615–624 (2018)
S. Sadripour, A.J. Chamkha, Thermal Sci. Eng. Prog. 9, 266–280 (2019)
A.A. Alfaryjat, A. Dobrovicescu, D. Stanciu, Chin. J. Chem. Eng. 27(3), 501–513 (2019)
P.R. Chauhan, R. Kumar, R.S. Bharj, Thermal Sci. Eng. Prog. 13, 100365 (2019)
P.R. Chauhan, K. Kumar, R. Kumar, M. Rahimi-Gorji, R.S. Bharj, J. Non-Equilib. Thermodyn. 45(1), 1–17 (2020)
K. Kumar, R. Kumar, R.S. Bharj, J. Non-Equilib. Thermodyn. 45(4), 333–342 (2020)
T.H. Ko, Heat Mass Transf. 44(2), 261–271 (2007)
T.H. Ko, C.S. Cheng, Int. Commun. Heat Mass Transfer 34(8), 924–933 (2007)
O.N. Zonouz, M. Salmanpour, J. Thermodyn. 2012, 574596 (2012)
M. Hedayatizadeh, Y. Ajabshirchi, F. Sarhaddi, S. Farahat, A. Safavinejad, H. Chaji, Heat Mass Transf. 48(7), 1089–1101 (2012)
H.M. Bahaidarah, Adv. Mech. Eng. 8(8), 1687814016660929 (2016)
S. Rashidi, M. Akbarzadeh, R. Masoodi, E.M. Languri, Int. J. Heat Mass Transf. 109, 812–823 (2017)
M. Akbarzadeh, S. Rashidi, J.A. Esfahani, Appl. Therm. Eng. 116, 278–291 (2017)
W. Wang, Y. Zhang, J. Liu, Z. Wu, B. Li, B. Sundén, Numer. Heat Transfer A Appl. 73(11), 788–805 (2018)
W. Wang, Y. Zhang, J. Liu, B. Li, B. Sundén, Int. J. Heat Mass Transf. 126, 836–847 (2018)
X. Shi, Y. Wang, X. Huai, K. Cheng, Appl. Therm. Eng. 157, 113714 (2019)
J.A. Esfahani, M. Akbarzadeh, S. Rashidi, M.A. Rosen, R. Ellahi, Int. J. Heat Mass Transf. 109, 1162–1171 (2017)
R. Dormohammadi, M. Farzaneh-Gord, A. Ebrahimi-Moghadam, M.H. Ahmadi, J. Mol. Liq. 269, 229–240 (2018)
S. Bhattacharyya, S.K. Pal, I. Pop, J. Therm. Anal. Calorim. 138(5), 3205–3221 (2019)
M. Akbarzadeh, S. Rashidi, N. Karimi, N. Omar, J. Therm. Anal. Calorim. 135(1), 177–194 (2019)
A. Ebrahimi-Moghadam, A.J. Moghadam, Appl. Therm. Eng. 149, 889–898 (2019)
O.G. Fadodun, A.A. Amosun, N.L. Okoli, D.O. Olaloye, J.A. Ogundeji, S.S. Durodola, J. Thermal Anal. Calorim., 1–16 (2020).
A.A. Al-Rashed, A. Shahsavar, O. Rasooli, M.A. Moghimi, A. Karimipour, M.D. Tran, Int. Commun. Heat Mass Transfer 104, 118–126 (2019)
Acknowledgements
The authors are very thankful to Mr. Prathvi Raj Chauhan, research scholar, Centre for Energy Studies, Indian Institute of Technology, Delhi, India for his valuable discussions and suggestions.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kumar, K., Kumar, R., Bharj, R.S. et al. Irreversibility analysis of the convective flow through corrugated channels: a comprehensive review. Eur. Phys. J. Plus 136, 402 (2021). https://doi.org/10.1140/epjp/s13360-021-01388-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjp/s13360-021-01388-x