Abstract
Al-10Ni-10Ce was rapidly solidified using the melt-spinning technique and characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The influence of the cooling rate on the microstructure has been studied. The XRD analysis showed that the solid solubility of Ce in α-Al increased. The SEM results exhibit nanostructure Al4Ce and Al3Ni intermetallic globular-like particles embedded within the nanostructure α-Al. The SEM analysis confirmed the refinement effect of Ce and Ni for the microstructure of the Al matrix.
This is a preview of subscription content, access via your institution.
References
H. Jones, Mater. Sci. Eng. A 65, 145 (1984).
Kim Taek-Soo, Hong Sun-Jik, Lee Byong-Taek, Mater. Sci. Eng. A 363, 81 (2003).
H. Sieber, J.S. Park, J. Weissmüller, J.H. Perepezko, Acta Mater. 49, 1139 (2001).
M.T. Clavaguera-Mora, J. Rodriguez-Viejo, D. Jacovkis, J.L. Touron, N. Clavaguera, W.S. Howells, J. Non-Cryst. Solids 287, 162 (2001).
F. Audebert, C. Mendive, A. Vidal, Mater. Sci. Eng. A 375-377, 1196 (2004).
Ha Yong Lee, Se Hun Jung, Soo Yong Lee, Kyung Hyun Ko, Mater. Sci. Eng. A 433, 139 (2006).
A. Inoue, K. Ohtera, A.P. Tsai, T. Masumoto, Jpn. J. Appl. Phys. 27, 479 (1988).
Y.H. Kim, A. Inoue, T. Masumoto, Mater. Trans. JIM 32, 331 (1991).
T. Gloriant, A.L. Greer, Nanostruct. Mater. 10, 389 (1998).
H. Chen, Y. He, G.J. Shiflet, S.J. Poon, Scripta Metall. Mater. 25, 1421 (1991).
S.H. Wang, X.F. Bian, J. Alloy Comp. 453, 127 (2008).
N.A. Belov, E.A. Naumova, D.G. Eskin, Mater. Sci. Eng. A 271, 134 (1991).
V.I. Dobatkin, V.I. Elagin, V.M. Fedorov, VILS, Moscow (1995) pp. 341.
A. Révész, G. Heunen, L.K. Varga, S. Suriñach, M.D. Baró, J. Alloys Comp. 368, 164 (2004).
M.A. Munoz-Morris, S. Surinach, L.K. Varga, M.D. Baro, D.G. Morris, Scripta Mater. 47, 31 (2002).
Zhanga Zhonghua, Bian Xiufang, Wang Yan, J. Alloy Comp. 349, 185 (2003).
M. Bauccio, ASM Metals Reference Book (ASM Int. Sixty Printing, 2001).
L.F. Mondolfo, Aluminum alloys, structure and properties (Bullerworths, London, 1976).
D. Isheim, D.N. Seidmann, J.H. Perepezko, G.B. Olson, Mater. Sci. Eng. A 353, 99 (2003).
D. Srinivasan, K. Chattopadhyay, Mater. Sci. Eng. A 255, 107 (1998).
B.J. McKay, P. Cizek, P. Schumacher, K.A.Q. O’Reilly, Mater. Sci. Eng. A 304-306, 240 (2001).
M. Ahmad Emad, Gouda El Said, Eur. Phys. J. Appl. Phys. 50, 21301 (2010).
P. Scherrer, Gött. Nachr. Gesell. 2, 98 (1918).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ahmed, E.M. The influence of rapid solidification on the microstructure properties of Al-10Ni-10Ce alloy. Eur. Phys. J. Plus 127, 70 (2012). https://doi.org/10.1140/epjp/i2012-12070-6
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjp/i2012-12070-6
Keywords
- Crystallite Size
- Supersaturated Solid Solution
- Alloy Comp
- Wheel Side
- Annealed Ribbon