Abstract
Problems connected with taking into account the processes of phase and structural transformations and the after-forging assignment of accumulation modes for forged ingots made of medium-carbon medium-alloy steels and preliminary heat treatment (PHT) thereof are considered. The main points on the basis of which PHT modes are chosen and limited use thereof is recommended with the use of isothermal austenitic transformation diagrams plotted according to a standard technique are analyzed and formulated.
Similar content being viewed by others
REFERENCES
Pozdnyak, L.A., Instrumental’nye stali: Spravochnik (Tool Steels: Handbook), Moscow: Metallurgiya, 1977.
Geller, Yu.A., Instrumental’nye stali (Tool Steels), Moscow: Metallurgiya, 1983, 5th ed.
Metallovedenie i termicheskaya obrabotka metallov: Spravochnik (Physical Metallurgy and Thermal Treatment of Metals: Handbook), Bernshtein, M.L. and Rakhshtadt, A.G., Eds., Moscow: Metallurgiya, 1983, vol. 3.
Dubovoi, V.Ya., Flokeny v stali (Flockens in Steel), Moscow: Metallurgiya, 1960.
Sklyuev, P.V., Vodorod i flokeny v krupnykh pokovkakh (Hydrogen and Flocks in Large Forgings), Moscow: Mashgiz, 1963.
Povolotskii, D.Ya. and Morozov, A.N., Vodorod i flokeny v stali (Hydrogen and Flocks in Steel), Moscow: GNTI, 1959.
Borisov, I.A., Investigation of the correction features of coarse-grained structure in the steels for cold rolling rolls and dies, Extended Abstract of Cand. Sci. Dissertation, Moscow, 1968.
Tovpenets, E.S., Influence of the cooling mode of large forgings on their mechanical properties and flocculability, Vestn. Mashinostr., 1970, no. 11, pp. 70–72.
Astaf’ev, A.A., Preliminary heat treatment of forgings, Metalloved. Term. Obrab. Met., 1978, no. 9, pp. 2–6.
Tsukanov, V.V., Sovremennye stali i tekhnologii v mashinostroenii (Modern Steels and Technologies in Power Engineering), St. Petersburg: Professional, 2014.
Termicheskaya obrabotka v mashinostroenii: Spravochnik (Heat Treatment in Mechanical Engineering: Handbook), Lakhtin, Yu.M. and Rakhshtadt, Eds., Moscow: Mashinostroenie, 1980.
Popov, A.A. and Popova, L.E., Spravochnik termista. Izotermicheskie i termokineticheskie diagrammy raspada pereokhlazhdennogo austenita (Thermist’s Handbook. Isothermal and Thermokinetic Diagrams of Phase Decomposition of Supercooled Austenite), Moscow: Mashgiz, 1961.
Sadovskii, V.D., Strukturnaya nasledstvennost’ v stali (Structural Heredity in Steel), Moscow: Metallurgiya, 1973.
Leont’ev, L.I., Tsukanov, V.V., and Smirnova, D.L., D.K. Chernov’s role in creating and developing the doctrine of modern metallurgy and metal science. Part 1. D.K. Chernov’s main theoretical and industrial discoveries, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2020, vol. 63, no. 10, pp. 796–801.
Leont’ev, L.I., Tsukanov, V.V., and Smirnova, D.L., D.K. Chernov’s role in creating and developing the doctrine of modern metallurgy and metal science. Part 2. Scientific and practical confirmation of D.K. Chernov’s ideas, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2020, vol. 63, nos. 11–12, pp. 873–877.
Durynin, V.A. and Tsukanov, V.V., Improvement of regimes of a preliminary heat treatment of forgings out of thermostable steels compositions Cr–4Ni–Mo–V and Cr–Mo–V and recommendations upon final heat treatment, Vopr. Materialoved., 2009, no. 3 (59), pp. 85–95.
Durynin, V.A. and Tsukanov, V.V., Improving the modes of forgings made heat treatment of heat-resistant steel, Elektrometallurgiya, 2008, no. 9, pp. 7–14.
Gorelik, S.S., Rekristallizatsiya metallov i splavov (Recrystallization of Metals and Alloys), Moscow: Metallurgiya, 1978, 2nd ed.
Sadovskii, V.D., Malyshev, K.A., and Sazonov, B.G., Fazovye i strukturnye prevrashcheniya pri nagreve stali (Phase and Structural Transformations During Heating of Steel), Moscow: Metallurgizdat, 1954.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Polyakov
Rights and permissions
About this article
Cite this article
Tsukanov, V.V., Smirnova, D.L. & Efimov, S.V. Choosing Accumulation and Preliminary Heat Treatment Modes for Making Forged Ingots of Medium-Carbon Medium-Alloy Steels. Inorg. Mater. Appl. Res. 13, 1534–1545 (2022). https://doi.org/10.1134/S2075113322060296
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113322060296