Skip to main content

Influence of Properties of Particulate Fillers on Erosion Resistance of Thin-Film Lacquer Coatings


The effect of superhard synthetic diamond micropowder and filamentary crystals of zinc oxides on erosion resistance of industrial epoxy-polyamide, epoxy-rubber, and fluororesin coatings is studied. It is shown that the use of synthetic diamonds in epoxy-polyamide and epoxy-rubber film formers and filamentary crystals in fluororesin film formers makes it possible to considerably increase their erosion resistance. The efficiency of fluoroplastic and fluororesin coatings has been shown for the first time.

This is a preview of subscription content, access via your institution.

Fig. 1.
Fig. 2.


  1. Kondrashov, E.K., Vladimirskii, V.N., and Beider, E.Ya., Erozionnostoikie lakokrasochnye pokrytiya (Erosion-Resistant Paint Coatings), Moscow: Khimiya, 1989.

  2. Kondrashov, E.K., Lakokrasochnye materialy i pokrytiya na ikh osnove v mashinostroenii (Paint and Varnish Materials and Coatings Based on Them in Mechanical Engineering), Moscow: Peint-Media, 2021.

  3. Kuznetsova, V.A. and Shapovalov, G.G., Tendencies of development of the erosion-resistant coatings (review), Tr. VIAM, 2018, no. 11 (71), pp. 74–85.

  4. Kondrashov, E.K. and Naidenov, N.D., Erosion resistant paint coverings of aviation purpose. Part 1. Erosion resistant paint coatings based on epoxy and polyurethane films forming (review), Tr. VIAM, 2020, no. 2, pp. 81–90. Accessed June 25, 2021.

  5. Erosion, Preece, C.M., Ed., New York: Academic, 1979.

    Google Scholar 

  6. Kuznetsova, V.A., Deev, I.S., and Kuznetsov, G.V., The effect of filler on the fatigue strength coefficient and microstructure of free-filled polymer film coatings under cyclic tension, Zavod. Lab. Diagn. Mater., 2014, vol. 80, no. 5, pp. 35–39.

    CAS  Google Scholar 

  7. Kondrashov, E.K., Erosion-resistant radio-transparent enamel VE-14, Aviats. Prom-st., 1976, no. 1, pp. 67–68.

  8. Kondrashov, E.K. and Lebedeva, T.A., Erosion-resistant coatings for the protection of polymer composite materials, Aviats. Mater. Tekhnol., 2003, no. 2, pp. 57–58.

  9. Beider, E.Ya., Donskoi, A.A., Zhelezina, G.F., Sytyi, Yu.V., and Surnin, E.G., Experience of using fluoropolymer materials in aviation technology, Ross. K-him. Zh., 2008, vol. 52, no. 3, pp. 30–44.

    CAS  Google Scholar 

  10. Vladimirskii, V.N., Extended Abstract of Cand. Sci. (Eng.) Dissertation, Moscow: All-Russ. Sci. Res. Inst. Aviat. Mater., 1977.

  11. Kuznetsova, V.A. and Vladimirskii, V.N., Weather-resistant erosion enamel VE-62 for the protection of the blades of fan motors, Aviats. Mater. Tekhnol., 2003, no. 2, pp. 58–60.

  12. Kuznetsova, V.A., Semenova, L.V., and Kuznetsov, G.V., Influence of the shape of zinc oxide particles on the performance properties of polymer coatings, Materialovedenie, 2012, no. 12, pp. 12–14.

  13. Kuznetsova, V.A., Vladimirskii, V.N., and Kuznetsov, G.V., Dispersed-reinforced erosion-resistant coatings, Aviats. Mater. Tekhnol., 2003, no. 2, pp. 53–56.

  14. Kablov, E.N., Innovative developments of FSUE “VIAM” SSC of RF on realization of “Strategic directions of the development of materials and technologies of their processing for the period until 2030,” Aviats. Mater. Tekhnol., 2015, no. 1 (34), pp. 3–33.

  15. Buznik, V.M., Kablov, E.N., and Koshurina, A.A., Materials for complex technical plants of Arctic application, in Nauchno-tekhnicheskie problemy osvoeniya Arktiki (Scientific-Technical Problems of the Arctic Developing), Moscow: Nauka, 2015, pp. 275–285.

  16. Ratner, A.V. and Zelinskii, V.G., Eroziya materialov teplo-energeticheskogo oborudovaniya (Erosion of Materials of Thermal Power Equipment), Moscow–Leningrad: Energiya, 1966.

  17. Urvantsev, L.A., Eroziya i zashchita metallov (Erosion and Protection of Metals), Moscow: Mashinostroenie, 1966.

  18. Gorlin, S.M., Eksperimental’naya aeromekhanika (Experimental Aeromechanics), Moscow: Vysshaya Shkola, 1970.

  19. Kashcheev, V.N., Abrazivnoe razrushenie tverdykh tel (Abrasive Destruction of Solids), Moscow: Nauka, 1970.

  20. Kozyrev, S.P., Gidroabrazivnyi iznos metallov pri kavitatsii (Hydroabrasive Wear of Metals in Cavitation), Moscow: Mashinostroenie, 1964.

  21. Perel’man, R.G., Erozionnaya prochnost’ detalei dvigatelei i energoustanovok letatel’nykh apparatov (Erosion Strength of Engine Parts and Power Plants of Aircraft), Moscow: Mashinostroenie, 1980.

  22. Zhelezina, G.F., Solov’eva, N.A., Makrushin, K.V., and Rysin, L.S., Polymer composite materials for manufacturing engine air particle separation of advanced helicopter engine, Aviats. Mater. Tekhnol., 2018, no. 1 (50), pp. 58–63.

  23. Pavlyuk, B.F., The main directions in the field of development of polymeric functional materials, Aviats. Mater. Tekhnol., 2017, no. S, pp. 388–392.

  24. Grashchenkov, D.V., Strategy of development of non-metallic materials, metal composite materials and heat-shielding, Aviats. Mater. Tekhnol., 2017, no. S, pp. 264–271.

  25. Kablov, E.N., Quality control of materials – guarantee of safety of operation of aviation equipment, Aviats. Mater. Tekhnol., 2001, no. 1, pp. 3–8.

Download references

Author information

Authors and Affiliations


Corresponding author

Correspondence to E. K. Kondrashov.

Additional information

Translated by L. Mukhortova

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Kondrashov, E.K., Naidenov, N.D. Influence of Properties of Particulate Fillers on Erosion Resistance of Thin-Film Lacquer Coatings. Inorg. Mater. Appl. Res. 13, 1116–1119 (2022).

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:


  • synthetic diamonds
  • filamentary crystals
  • erosion resistance
  • epoxy-polyamide
  • epoxy-rubber
  • fluororesin