Abstract
Results of the investigation of the tribotechnical properties of solid lubricant coatings obtained on VK6 hard alloy (94% WC + 6% Co) as a result of the thermohydrochemical treatment (THCT) in an aqueous disperse medium based on red clay are presented. Multidimensional optimization of the composition of the medium and temperature–time parameters of the process of THCT with respect to the friction coefficient of the obtained solid lubricant coatings is performed. By using mathematical models, process parameters–property diagrams are constructed. Processing using the optimum THCT mode makes it possible to decrease the friction coefficient of a hard-alloy surface 3.4-fold in comparison with the untreated surface under the conditions of the absence of a lubricant.
Similar content being viewed by others
REFERENCES
Hocking, M.G., Sidky, P., and Vasantasree, V., Metallic and Ceramic Coatings: Production, High Temperature Properties, and Applications, New York: Willey, 1989.
Materialovedenie: uchebnik dlya vtuzov (Materials Science: Manual for Higher Educational Engineering Institutions), Arzamasov, B.N., Ed., Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2005.
Nanostructured Coatings, Cavaleiro, A. and de Hosson, J.T., Eds., New York: Springer, 2006.
Materialovedenie. Tekhnologiya konstruktsionnykh materialov (Material Science: Technology of Constructional Materials), Cherednichenko, V.S., Ed., Moscow: Omega-L, 2008.
Shmatov A.A., Soos L., and Krajny Z., Thermo-Hydrochemical Treatment for Tool Materials (A Monograph), Bratislava: Slovak Tech. Univ., 2014.
Shmatov, A.A., Formation of a composite structure during thermohydrochemical processing of a hard alloy, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 2, pp. 33–40.
Polzer, G. and Meissner, F., Grundlagen zu Reibung und Verschlei, Leipzig: VEB Deutscher Verlag für Grundstoffindustrie Leipzig, 1983.
Myshkin, N.K. and Petrokovets, M.N., Ternie, smazka, iznos (Friction, Lubrication, and Wear), Moscow: Fizmatlit, 2007.
Fridman, Ya.B., Mekhanicheskie svoistva metallov (Mechanical Properties of Metals), Moscow: Mashinostroenie, 1974, vol. 2.
Garkunov, D.N. and Kornik, P.I., Vidy treniya i iznosa. Ekspluatatsionnye povrezhdeniya detalei mashin (Types of Friction and Wear. Operational Damage of Machine Parts), Moscow: Mosk. S-kh. Akad., 2003.
Vityaz’, P.A., Tverdosmazochnye pokrytiya v mashinostroenii (Solid Lubricating Coatings in Machine Engineering), Minsk: Belarusskaya Nauka, 2007.
Shmatov, A.A., Low-temperature technology dispersing raw materials (sand, clay, chalk) to create high performance materials and coatings, Proc. Green Materials Workshop, Hanover, April 9,2013, Hanover: East-West-Sci. Centre, 2013, p. 7.
Shmatov, A.A., Natural nanomaterials based on clay and alumina, Materialy 16 Mezhdunarodnoi konferentsii “Nauka—obrazovaniyu, proizvodstvu, ekonomike,” Minsk, 18 maya 2018 g. (Proc. Sixteenth Int. Conf. “Science for Education, Industry, and Economics,” Minsk, May 18, 2018), Kharitonchik, S.V., et al., Eds., Minsk: Bel. Nats. Tekh. Univ., 2018, vol. 2, pp. 257–258.
Novik, F.S., Matematicheskie metody planirovaniya eksperimentov v metallovedenii (Mathematical Planning of the Experiments in Metal Science), Moscow: Mosk. Inst. Stali Splavov, 1971, ch. 4.
Vityaz’, P.A., Zhilinskii, O.V., and Laktyushkina, T.V., Computer-based selection of technically optimal variant in multicriteria tasks of design, Fiz. Mezomekh., 2004, vol. 7, suppl. 1-1, pp. 3–11.
Vityaz’, P.A, et al., Computer synthesis technology of research and design of technical and technological systems, Pyataya mezhdunarodnaya nauchno-tekhnicheskaya konferentsiya “Informatsionnye tekhnologii v promyshlennosti (ITI’2008),” 22–24 oktyabrya 2008 g. (Fifth Int. Sci.-Tech. Conf. “Information Technologies in Industry (ITI’2008),” October 22–24, 2008), Minsk: Inst. Probl. Inf., Nats. Akad. Nauk Bel., 2008, pp. 11–12.
Bel’skii, S.E. and Tofpenets, R.L., Strukturnye factory ekspluatatsionnoi stoikosti rezhushchego instrumenta (Structural Factors of Operational Strength of Cutting Tool), Minsk: Nauka i Tekhnika, 1984.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by E. Boltukhina
Rights and permissions
About this article
Cite this article
Shmatov, A.A. Multidimensional Design of the Technology of Strengthening of a Hard Alloy in a Hydrosol of Red Clay. Inorg. Mater. Appl. Res. 11, 164–171 (2020). https://doi.org/10.1134/S2075113320010335
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113320010335