Abstract
Alloys (SnBi)100 – xSbx (x < 4.8) have been synthesized by means of ultrafast quenching from a melt in the form of a foil having a thickness of 30–70 μm. The effect of antimony on the phase composition, grain structure, and texture of the alloys has been analyzed. The processes of aging in metastable rapidly hardened foils and their effect on the microhardness of the alloys are considered.
Similar content being viewed by others
REFERENCES
Pivnenko, V., Possible transition to alloys used in lead-free solders, Radiokomponenty, 2006, no. 3 (9), pp. 8–35.
Kanchanomai, C. and Muton, Y., Effect of temperature on isothermal low cycle fatigue properties of Sn–Ag eutectic solder, Mater. Sci. Eng., A, 2004, vol. 381, pp. 113–120.
Kamal, M., El-Bediwi, A.B., and El-Shobaki, M.R., Influence of alloying elements on structure and some physical properties of quenched Sn–Sb alloy, Radiat. Eff. Defects Solids, 2006, vol. 161, no. 9, pp. 549–557.
Yeh, C.-H., Chang, L.-S., and Straumal, B., Study on the solidus line in Sn-rich region of Sn–In phase diagram, J. Phase Equilib. Diffus., 2009, vol. 30, no. 3, pp. 254–257.
Yeh, C.-H., Chang, L.-S., and Straumal, B. Wetting transition of grain boundaries in tin–rich indium-based alloys and its influence on electrical properties, Mater. Trans., 2010, vol. 51, pp. 1677–1682.
Allen, G.L. and Jesser, W.A., The structure and melting character of sub-microscon In–Sn and Bi–Sn particles, J. Cryst. Growth, 1984, vol, pp. 546–551.
Shepelevich, V.G., Bystrozatverdevayushchie legkoplavkie splavy (Rapidly Solidified Light-Melting Alloys), Minsk: Belorus. Gos. Univ., 2015.
El-Ashram, T. and Shalaby, R.M., Effect of rapid solidification and small additions of Zn and Bi on the structure and properties of Sn–Cu eutectic alloy, J. Electron. Mater., 2005, vol. 34, no. 2, pp. 212–215.
Riani, P., Cacciameni, G., Parodi, N., Borzone, G., Marazza, R.R., Nanni, F., and Gusmano, G., Phase equilibria in In–Sn-rich part of the Cu–In–Sn ternary system, J. Alloys Compd., 2010, vol. 503, pp. 65–70.
Negm, S.E., Mady, H., and Bahgat, A.A., Influence of the addition of indium on the mechanical creep of Sn–3.5% Ag alloy, J. Alloys Compd., 2010, vol. 503, pp. 65–70.
Vasil’ev, V.A., Mitin, B.S., Pashkov, I.N., Serov, M.M., Skuridin, A.A., Lukin, A.A., and Yakovlev, V.B., Vysokoskorostnoe zatverdivanie rasplavov (teoriya, tekhnologiya i materialy) (Rapid Solidification of Melts: Theory, Technology, and Materials), Moscow: Intermet Inzhiniring, 1998.
Bennett, T. and Poulikakos, D., Splat-quench solidification: Estimating the maximum spreading of a droplet impacting a solid surface, J. Mater. Sci., 1993, vol. 28, no. 4, pp. 2025–2039.
Pashkov, I.N., Pikunov, M.V., Tavolzhanskii, S.A., and Pashkov, A.I., Development of processes for preparation and use of solder alloys in a dispersed state with a microcrystalline or amorphous structure, Metallurgist, 2010, vol. 54, no. 5, pp. 358–361.
Martyushev, N.V. and Skeeba, V.Yu., The method of quantitative automatic metallographic analysis, IOP Conf. Ser.: J. Phys., 2017, vol. 803, p. 012094-1-5.
Dos Anjos, M.J., et al., Quantitative analysis of metals in soil using X-ray fluorescence, Spectrochim. Acta, Part B, 2000, vol. 55, no. 7, pp. 1189–1194.
Ilyushin, A.S. and Oreshko, A.P., Difraktsionnyi strukturnyi analiz: uchebnoe posobie dlya vuzov (Diffraction Structure Analysis: Manual for Higher Education Institutions), Moscow: Yurait, 2017.
Hu, X., Li, K., and Ai, F., Research on lamellar structure and micro-hardness of directionally solidified Sn–58Bi eutectic alloy, China Foundry, 2012, vol. 9, no. 4, pp. 360–365.
Shepelevich, V.G., The texture of the rapidly quenched foils of bismuth, antimony, and their alloys, Kristallografiya, 1991, vol. 36, no. 1, pp. 238–239.
Gusakova, O.V. and Shepelevich, V.G., Structure and properties of ultrafast-quenched Sn–Bi foils, Bull. Russ. Acad. Sci.: Phys., 2008, vol. 72, no. 11, pp. 1504–1506.
Gusakova, O.V. and Shepelevich, V.G., Grain structure and texture of rapidly hardened tin foils obtained in various ultrafast cooling conditions, Mater., Tekhn.,Instrum., 2010, vol. 15, no. 2, pp. 54–57.
Conrad, H. and Narayan, J., On the grain size softening in nanocrystalline materials, Scr. Mater., 2000, vol. 42, no. 11, pp. 1025–30.
Chuvil’deev, V.N., et al., Influence of the grain size and structural state of grain boundaries on the parameter of low-temperature and high-rate superplasticity of nanocrystalline and microcrystalline alloys, Phys. Solid State, 2010, vol. 52, no. 5, pp. 1098–1106.
Shepelevich, V.G., Belaya, O.N., Gusakova, O.V., and Neumerzhitskaya, E.Yu., The phase composition and grain structure of the rapidly solidified alloy Pb–13% (w.) Sb, Materialovedenie, 2016, no. 7, pp. 20–23.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Polyakov
Rights and permissions
About this article
Cite this article
Shepelevich, V.G., Gusakova, O.V. The Effect of Antimony Alloying on the Microstructure and the Properties of Rapidly Solidified Alloy Bi–60 at % Sn. Inorg. Mater. Appl. Res. 11, 25–30 (2020). https://doi.org/10.1134/S2075113320010323
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113320010323