Abstract
The regularities of structure formation of dispersion strengthened composite aluminum powders have been studied using transmission electron microscopy and X-ray structural analysis during reactive mechanical alloying in the presence of stearic acid. It has been established that the treatment is accompanied by mechanochemical transformations forming phase composition and structure in particles of composite powder. The formed fine structure is characterized by high stability, and subsequent annealing of powdered compositions at temperatures close to aluminum melting point does not lead to its significant modification.
Similar content being viewed by others
REFERENCES
Lovshenko, F.G., Panteleenko, F.I., and Rogachev, A.V., Novye resursosberegayushchie tekhnologii i kompozitsionnye materialy (New Resource-Saving Technologies and Composite Materials), Moscow: Energoatomizdat, 2004.
Shalunov, E.P., Granular composites from stainless steel with mechanically-synthesized reinforcing DISCOM® nanoparticles and high-resource products from them, Nanotekhnika, 2007, no. 1 (9), pp. 69–78.
Shalunov, E.P. and Smirnov, V.M., Formation mechanism of the structure and properties of composite materials of Cu–Al–C–O system based on reactive mechanical alloying, Vestn. Chuvash. Univ., 2013, no. 3, pp. 314–322.
Gadalov, V.N., Filonovich, A.V., Vornacheva, I.V., Kovalev, S.V., Roshchupkin, V.M., and Trigub, V.B., Fine structure and durability of aluminum monocrystalls under ultrasound, Uprochnyayushchie Tekhnol. Pokrytiya, 2016, no. 8 (140), pp. 3–6.
Lovshenko, F.G. and Lovshenko, G.F., Formation of mechanically alloyed powders based on metals for gas-thermal coatings, Vestn. Beloruss-Ross. Univ., 2017, no. 2, pp. 56–68.
Lovshenko, F.G., Lovshenko, G.F., and Fedosenko, A.S., The phase composition, structure, and properties of mechanically alloyed composite powders based on the iron–aluminum system and coatings from them, Vestn. Beloruss-Ross. Univ., 2012, no. 1, pp. 36–50.
Ivanov, Yu.F., Paul’, A.V., and Koneva, N.A., Electron microscopic analysis of nanocrystalline materials, Fiz. Met. Metalloved., 1991, no. 7, pp. 206–208.
Koneva, N.A. and Kozlov, E.V., Physics of the stages of plastic deformation, in Strukturnye urovni plasticheskoi deformatsii i razrusheniya (The Structural Levels of Plastic Deformation and Destruction), Novosibirsk: Nauka, 1990, ch. 5, pp. 123–186.
Zasimchuk, E.E., Poligonizatsiya, rekristallizatsiya i termicheskaya stabil’nost’ svoistv materialov (Polygonization, Recrystallization, and Thermal Stability of the Properties of Materials), Kiev: Naukova Dumka, 1976.
Gadalov, V.N., Vinokurov, O.V., Savel’ev, V.I., Tolkushev, A.A., and Vornacheva, I.V., Fast crystallized powders from the wastes of titanium alloys OT-4 and VT20 after electrical pulse treatment, Zagotovitel’nye Proizvod. Mashinostr., 2016, no. 11, pp. 42–46.
Gvozdev, A.E., Kolmakov, A.G., Provotorov, D.A., Bogolyubova, D.N., Sergeev, N.N., and Tikhonova, I.V., Features of softening processes of aluminum, copper, and their alloys under hot deformation, Inorg. Mater.: Appl. Res., 2015, vol. 6, no. 1, pp. 32–40.
Gvozdev, A.E., Sergeyev, N.N., Minayev, I.V., Tikhonova, I.V., and Kolmakov, A.G., Role of nucleation in the development of first-order phase transformations, Inorg. Mater.: Appl. Res., 2015, vol. 6, no. 4, pp. 283–288.
Funding
This work was supported by the Ministry of Education and Science of the Russian Federation, projects no. 11.6682.2017/8.9 and no. 007-00129-18-00.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by I. Moshkin
Rights and permissions
About this article
Cite this article
Gadalov, V.N., Gvozdev, A.E., Kolmakov, A.G. et al. Regularities of Structure Formation of Aluminum Powdered Particles Produced by Reactive Mechanical Alloying. Inorg. Mater. Appl. Res. 11, 198–201 (2020). https://doi.org/10.1134/S2075113320010128
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113320010128