Abstract—The resistance to atmospheric corrosion of 25Kh1MF steel after aluminizing and thermal improvement has been studied. It is established that the low resistance of the aluminized layer to atmospheric corrosion is caused by surface defects, such as cracks and the pores, or by the partial removal of the layer containing the Fe3Al intermetallic. In the aluminized layer containing ferrite doped with aluminum, aluminum nitrides that prevent the cold diffusion welding of mating thread surfaces of fasteners are found.
Similar content being viewed by others
REFERENCES
Blanter, M.E., Teoriya termicheskoi obrabotki (Theory of Thermal Processing), Moscow: Metallurgiya, 1984.
Arzamasov, B.N., Khimiko-termicheskaya obrabotka metallov v aktivirovannykh gazovykh sredakh (Chemical-Thermal Processing of Metals in Activated Gas Media), Moscow: Mashinostroenie, 1979.
Zemskov, G.V. and Kogan, R.L., Mnogokomponentnoe diffuzionnoe nasyshchenie metallov i splavov (Multicomponent Diffusive Saturation of Metals and Alloys), Moscow: Metallurgiya, 1978.
Progressivnye metody termicheskoi i khimiko-termicheskoi obrabotki (Progressive Thermal and Chemical-Thermal Processing), Lakhtin, Yu.M. and Kogan, Ya.D., Eds., Moscow: Mashinostroenie, 1972.
Houdremont, E., Handbuch der Sonderstahlkunde, Berlin: Springer-Verlag, 1956.
Polevoi, S.N. and Evdokimov, V.D., Uprochnenie metallov: Spravochnik (Hardening of Metals: Handbook), Moscow: Mashinostroenie, 1986.
Termicheskaya obrabotka v mashinostroenii. Spravochnik (Thermal Processing in Machine Engineering: Handbook), Lakhtin, Yu.M. and Rakhshtadt, A.G., Eds., Moscow: Mashinostroenie, 1980.
Goldstein, J., Newbury, D.E., Joy, D.C., Lyman, C.E., Echlin, P., Lifshin, E., Sawyer, L., and Michael, J.R., Scanning Electron Microscopy and X-Ray Microanalysis: A Text for Biologists, Materials Scientists, and Geologists, New York: Springer-Verlag, 1984.
Microanalyse et Microscopie Electronique à Balayage, Maurice, F., Meny, L., and Texier, R., Eds., Orsay: Les Editions de Physique, 1978.
Gorynin, V.I., Vysokoprochnye materialy dlya rez’bovykh soedinenii (High-Strength Materials for Threaded Connections), St. Petersburg: Tsentr. Nauchno-Issled. Inst. Konstrukts. Mater. Prometey, 2016.
Birger, I.A. and Iosilevich, G.B., Rez’bovye soedineniya (Threaded Connections), Moscow: Mashinostroenie, 1973.
ACKNOWLEDGMENTS
Experimental studies were carried out on the equipment of the Center for Collective Use of Scientific Equipment Composition, Structure, and Properties of Structural and Functional Materials of the National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey with the financial support of the Ministry of Education and Science under agreement no. 14.595.21.0004 (unique identification number RFMEFI59517X0004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Kadkin
Rights and permissions
About this article
Cite this article
Olenin, M.I., Gorynin, V.I., Berezhko, B.I. et al. Some Aspects of Studying the Corrosion Processes in 25Kh1MF Steel Fasteners after Aluminizing. Inorg. Mater. Appl. Res. 9, 1182–1187 (2018). https://doi.org/10.1134/S2075113318060217
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113318060217