Abstract
The investigation is focused on the study of the structure, fracture, and phase composition of standard industrial pseudo-alpha-titanium alloy and the same titanium alloy alloyed with ruthenium. Also, the possibility to increase the low-cycle fatigue and resistance to stress corrosion cracking of industrial titanium allow using cathodic alloying with ruthenium.
Similar content being viewed by others
References
Gorynin, I.V., Ushkov, S.S., Khatuntsev, A.N., and Loshakova, N.I., Titanovye splavy dlya morskoi tekhniki (Titanium Alloys for Marine Machines), St. Petersburg: Politekhnika, 2007.
Schutz, R.-W., Stress corrosion resistance of grade 23 and 29 titanium riser pipe in aqueous glycol drill fluids, Proc. 11th World Conf. on Titanium (JIMIC5) “ Ti–2007: Science and Technology,” Kyoto: Japan Inst. Met., 2007, vol. 2, pp. 1217–1220.
Tomashov, N.D., Titan i ego korrozionnostoikie splavy na ego osnove (Titanium and Titanium-Based Corrosion-Resistant Alloys), Moscow: Metallurgiya, 1985.
Leonov, V.P., Chudakov, E.V., Kulik, V.P., Malinkina, Yu.Yu., and Tret’yakova, N.V., The influence of corrosion-active medium on the fracture viscosity of titanium pseudo-β alloys, Nov. Materialoved. Nauka Tekh., 2015, no. 6, pp. 9–14.
Il’in, A.A., Kolachev, B.A., and Pol’kin, I.S., Titanovye splavy. Sostav, struktura, svoistva (Titanium Alloys: Composition, Structure, and Properties), Moscow: Vseross. Inst. Legk. Splavov, Mosk. Aviats. Tekhnol. Inst., 2009.
Scherbinin, V.F., Leonov, V.P., and Malinkina, Yu.Yu., Increase in corrosion resistance of titanium alloy in concentrated aqueous solutions of chlorides at high temperatures, Inorg. Mater.: Appl. Res., 2013, vol. 4, no. 6, pp. 537–541.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.P. Leonov, E.V. Chudakov, Yu.Yu. Malinkina, 2017, published in Materialovedenie, 2017, No. 1, pp. 3–11.
Rights and permissions
About this article
Cite this article
Leonov, V.P., Chudakov, E.V. & Malinkina, Y.Y. The influence of microadditives of ruthenium on the structure, corrosive-mechanical strength, and fractography of destruction of pseudo-alpha-titanium alloys. Inorg. Mater. Appl. Res. 8, 556–565 (2017). https://doi.org/10.1134/S2075113317040165
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113317040165