Abstract
The manufacturing technology of the composite filler rods based on babbit B83 by extrusion is developed. The filler rods have a uniform distribution of the high-strength reinforcing particles (silicon carbide) and the modified rock shungite. It is shown that the hardness and density values of the composite filler rods correspond to the properties of cast babbit B83 alloy, but their wear resistance is superior by a factor of two.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Shpagin, A.I., Antifriktsionnye splavy (Antifriction Alloys), Moscow: Metallurgiya, 1956.
Chichinadze, A.V., Berlinger, E.M., Braun, E.D., et al., Trenie, iznos i smazka (tribologiya i tribotekhnika) (Friction, Wear, and Lubrication: Tribology and Tribotechnics), Chichinadze, A.V., Ed., Moscow: Mashinostroenie, 2003.
Simma, L.I., Development of antifriction coats for sliding bearings of compressors, Chem. Petrol. Eng., 2009, vol. 45, nos. 9–10, pp. 649–652.
Gvozdev, P.P., Kobernik, N.V., and Mikheev, R.S., The influence of carbon nanotubes on the structure and properties of antifriction coatings, Svarka Diagn., 2013, no. 6, pp. 36–39.
Kobernik, N.V., Chernyshov, G.G., Mikheev, R.S., Chernyshova, T.A., and Kobeleva, L.I., Argon-arc welding of wear-resistant composite coatings, Fiz. Khim. Obrab. Mater., 2009, no. 1, pp. 51–55.
Zernin, M.V. and Yakovlev, A.V., Analysis of the fatigue durability of babbit layer of heavy-loaded sliding bearings, Zavod. Lab., 1997, vol. 63, no. 11, pp. 39–47.
Valeeva, A.Kh., Valeev, I.Sh., and Fazlyakhmetov, R.F., Effect of structure of B83 babbit on its wear, J. Frict. Wear, 2014, vol. 35, no. 4, pp. 311–315.
Zeng, J., Xu, J., Hua, W., Xia, L., Deng, X., Wang, S., Tao, P., Ma, X., Yao, J., Jiang, C., and Lin, L., Wear performance of the lead free tin bronze matrix composite reinforced by short carbon fibers, Appl. Surf. Sci., 2009, vol. 255, pp. 6647–6651.
Cui, G., Bi, Q., Niu, M., Yang, J., and Liu, W., The tribological properties of bronze–SiC–graphite composites under sea water condition, Tribol. Int., 2013, vol. 60, pp. 25–35.
Kalashnikov, I.E., Kovalevski, V.V., Chernyshova, T.A., and Bolotova, L.K., Aluminum-matrix composite materials with shungite rock fillers, Russ. Metall. (Engl. Transl.), 2010, vol. 2010, no. 11, pp. 1063–1071.
Kalashnikov, I.E., Bolotova, L.K., and Chernyshova, T.A., The structure of cast aluminum-matrix composites reinforced by intermetallic phases and nanosize refractory powders, Tsvetn. Met., 2010, no. 9, pp. 67–71.
Kovalevski, V.V., Shungite minerals: Prospects and challenges in the use of composite materials, in Teoriya i praktika tekhnologii proizvodstva izdelii iz kompozitsionnykh materialov i novykh metallicheskikh splavov–21 vek (Theory and Practice of Manufacturing Technologies of Composites and New Metal Alloys–21 Century), Frolov, K.F., Obraztsov, I.F., Sirotkin, O.S., and Bogolyubov, V.S., Eds., Moscow: Mosk. Aviats. Inst., 2001, pp. 303–307.
Kovalevski, V.V., Shungite is a natural carbon fullerene: structure, properties, modifications, and new purposes for use, in Fullereny i nanostruktury v kondensirovannykh sredakh (Fullerenes and Nanostructures in Condensed Media), Minsk: Navuka, 2011, pp. 74–79.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.E. Kalashnikov, L.K. Bolotova, I.V. Katin, L.I. Kobeleva, A.G. Kolmakov, R.S. Mikheev, N.V. Kobernik, 2016, published in Perspektivnye Materialy, 2016, No. 9, pp. 70–77.
Rights and permissions
About this article
Cite this article
Kalashnikov, I.E., Bolotova, L.K., Katin, I.V. et al. Production of antifriction composite filler rods based on babbit B83 by extrusion. Inorg. Mater. Appl. Res. 8, 335–339 (2017). https://doi.org/10.1134/S207511331702006X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S207511331702006X