Abstract
Samples of MoSi2-WSi2 composite materials with additions of magnesium alumosilicates are obtained by solid phase sintering at 1650–1800°C in an argon atmosphere of powdered mixtures of initial components and disintegrated cast samples of 70% MoSi2–30% WSi2 (Mo0.7W0.3Si2), synthesized in an SHS reactor. The influence of the content of tungsten and oxide additive on oxidation of samples in air at 750°C for 100 h is studied. It is found that 70% MoSi2–30% WSi2 composite materials are less exposed to oxidation than MoSi2 and WSi2, and addition of 20 vol % magnesium alumosilicates decreases the rate of low temperature oxidation.
Similar content being viewed by others
References
Gladyshevskii, E.I., Kristallokhimiya silitsidov i germanidov (Crystalochemistry of Silicides and Germanides), Moscow: Metallurgiya, 1971.
Gel’d, I.V. and Sidorenko, F.A., Silitsidy perekhodnykh metallov chetvertogo perioda (Silicides of Transition Metals of Fourth Period), Moscow: Metallurgiya, 1971.
Samsonov, N.V., Dvorina, L.A., and Rud’, B.M., Silitsidy (Silicides), Moscow: Metallurgiya, 1979.
Gnesin, B.A., Gurzhiyants, P.A., and Borisenko, E.B., (Mo,W)5Si3-(Mo,W)Si2 Eutectics: Properties and Application in Composite Materials, Inorg. Mater., 2003, vol. 39, pp. 701–709.
Gnesin, B.A. and Gurzhiyants, P.A., RF Patent no. 2160790, Byull. Izobret., no. 35, 2000.
Gnesin, B.A. and Gnesin, I.B., Possibilities of REFSIK and REFSIKOT High-Temperature Protective Coatings on Carbon Materials, Tezisy dokladov mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Aktual’nye voprosy aviatsionnogo materialovedeniya” 2007. GNTs FGUP “Vserossiiskii institut aviatsionnykh materialov” (Proc. Int. Sci.-Tech. Conf. “Actual Questions of Aviation Material Science”), Moscow, Vseross. Inst. Aviats. Mater., 2007, pp. 93–94.
Bundschuh, K. and Schütze, M., Materials for Temperatures above 1500°C in Oxidizing Atmospheres. Part I: Basic Considerations on Materials Selection, Mater. Corr. (Werkstoffe und Korrosion), 2001, vol. 52, pp. 204–212.
Bundschuh, K. and Schütze, M., Materials for Temperatures above 1500°C in Oxidizing Atmospheres. Part II: Experimental Results on the Oxidation of MoSi2 Composites and Coated RSiC, Mater. Corr. (Werkstoffe und Korrosion), 2001, vol. 52, pp. 268–282.
Lohfeld, S., Schutze, M., Bohm, A., et al., Oxidation Behavior of Particle Reinforced MoSi2 Composites at Temperatures up to 1700°C, Mater. Corr. (Werkstoffe und Korrosion), 2005, vol. 56, pp. 250–258.
Lohfeld, S., Schütze, M., Böhm, A., et al., Oxidation Behavior of Particle Reinforced MoSi2 Composites at Temperatures up to 1700°C. Part II: Initial Screening of the Oxidation Behavior of MoSi2 Composites, Mater. Corr. (Werkstoffe und Korrosion), 2005, vol. 56, pp. 149–158.
Klemm, H. and Schubert, C., Silicon Nitride/Molybdenum Disilicide Composite with Superior Long-Term Oxidation Resistance at 1500°C, J. Am. Ceram. Soc., 2001, vol. 84, pp. 2430–2432.
Yuntian T. Zhu, Li Shu, and Darryl P. Butt, Kinetics and Products of Molybdenum Disilicide Powder Oxidation, J. Am. Ceram. Soc., 2002, vol. 85, pp. 507–509.
Ramberg, E. and Wayne, L.W., Oxidation Kinetics and Composite Scale Formation in the System Mo(Al, Si)2, J. Am. Ceram. Soc., 2002, vol. 85, pp. 444–452.
Hansson, K., Halvarsson, M., Tang, J.E., et al., Oxidation Behavior of a MoSi2-Based Composite in Different Atmospheres in the Low Temperature Range (400–550°C), J. Europ. Ceram. Soc., 2004, vol. 24, pp. 3559–3573.
Gang Wang, Wan Jiang, Guangzhao Bai, and Libin Wu, Effect of Addition of Oxides on Low-Temperature Oxidation of Molybdenum Disilicide, J. Am. Ceram. Soc., 2003, vol. 86, pp. 731–734.
Houan Zhang, Ping Chen, Jianhui Yan, and Siwen Tang, Fabrication and Wear Characteristics of MoSi2 Matrix Composite Reinforced by WSi2 and La2O3, Int. J. Ref. Met. Hard Mat., 2004, vol. 22, pp. 271–275.
Titov, D.D., Kargin, Yu.F., and Popova, N.A., Interaction in MoSi2-WSi2 System and Effect of Oxide Additives on Oxidation, IX Mezhdunarodnoe Kurnakovskoe soveshchanie po fiziko-khimicheskomu analizu (Proc. 9th Int. Kurnakov Meeting on Physical and Chemical Analysis), Perm: Perm. Gos. Univ., 2010.
Houan Zhang, Ping Chen, and Siwen Tang, Synthesis and Mechanical Properties of La2O2-WSi2/MoSi2 Composites, J. Advan. Mater., 2006, no. 1, pp. 77–81.
Gnesin I.B. Experimental Study of Structure and Properties of Molybdenum and Tungsten Silicide Solid Solutions and Their Application, Candidate Sci. (Eng.) Dissertation, Chernogolovka, Solid State Phys. Inst Russ. Acad. Sci., 2009.
Kieffer, R., Schob, O., Nowotny, H., and Benesovsky, F., Untersuchungen in den Dreistoffen: Cr-W-Si und Mo-W-Si, Monatsh. Chem., 1962, vol. 93, pp. 517–521.
Titov, D.D., Caoline Additive Effect on Low-Temperature Oxidation of Composite Material Based on Molybdenum Silicide, IV rossiiskaya ezhegodnaya konferentsiya molodykh nauchnykh sotrudnikov i aspirantov (Proc 4th Russ. Ann. Conf. Young Scientists and Aspirants), 2009.
Titov, D.D., Popova, N.A., Lysenkov, A.S., and Kargin, Yu.F., New Composite Materials, Perspekt. Mater., 2011, no. 11, pp. 493–499.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.D. Titov, Yu.F. Kargin, A.S. Lysenkov, N.A. Popova, V.A. Gorshkov, 2012, published in Materialovedenie, 2012, No. 4, pp. 45–49.
Rights and permissions
About this article
Cite this article
Titov, D.D., Kargin, Y.F., Lysenkov, A.S. et al. Influence of WSi2 content and additions of magnesium alumosilicates on oxidation and strength properties of MoSi2-WSi2 composites. Inorg. Mater. Appl. Res. 4, 66–70 (2013). https://doi.org/10.1134/S2075113313010115
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113313010115