Abstract
In the gasless combustion mode of powder mixtures of titanium and silicon, titanium silicide Ti5Si3–titanium ligament metal–matrix composites were synthesized. The structure of the composites consists of silicide grains separated by titanium binder interlayers with a thickness that depends on the titanium content in the reaction mixtures. During oxidation in air at temperatures up to 1000°C, the predominant oxidation of the titanium binder occurs with the formation of titanium oxide TiO2 (rutile).
Similar content being viewed by others
REFERENCES
Gorynin, I.V. and Chechulin, B.B., Titan v promyshlennosti (Titanium for Industry), Moscow: Mashynostroenie, 1990.
Zwicker, U., Titan und Titanlegirungen, Springer, 1974.
Golovko, E.I., Vysokotemperaturnoe okislenie metallov i splavov. Spravochnik (High-Temperature Oxidation of Metals and Alloys. Handbook), Kiev: Naukova Dumka, 1980.
Tjong, S.C. and Mai, Y.-W., Compos. Sci. Technol., 2008, vol. 68, p. 583.
Hayat, M.D., Singh, H., He, Z., and Cao, P., Composites, Part A, 2019, vol. 121, p. 418.
Wang, M., Lu, W., Qin, J., et al., Scr. Mater., 2006, vol. 54, p. 1955.
Sun, S., Wang, M., Wang, L., et al., Composites, Part B, 2012, vol. 43, p. 3334.
Jiao, Y., Huang, L.J., Geng, L., et al., Mater. Sci. Eng., A, 2017, vol. 701, p. 359.
Benamor, A., Hadji, Y., Chiker, N., et al., Ceram. Int., 2019, vol. 45, p. 21781.
Yadav, P. and Lee, D.B., Adv. Technol. Innovation, 2017, vol. 2, no. 4, p. 130.
Kim, Y.J., Yadav, P., Hahn, J., et al., Met. Mater. Int., 2019, vol. 25, p. 627.
Huang, X., Gao, Y., Li, Q., et al., Corros. Sci., 2021, vol. 181, p. 109235.
Tkachenko, S., Datskevich, O., Dvorak, K., and Kulak, L., J. Alloys Compd., 2017, vol. 694, p. 1098.
Mitra, R., Int. Mater. Rev., 2006, vol. 51, p. 13.
Liang, W. and Zhao, X.G., Scr. Mater., 2001, vol. 44, p. 1049.
Vojtech, D., Kubatik, T., Pavlickova, M., and Maixner, J., Intermetallics, 2006, vol. 14, p. 1181.
Wu, Y., Wang, A.H., Zhang, Z., et al., Appl. Surf. Sci., 2014, vol. 305, p. 16.
Riley, D.P., Intermetallics, 2006, vol. 14, p. 770.
Pribytkov, G.A., Krinitsyn, M.G., and Korzhova, V.V., Khim. Fiz. Mezoskopiya, 2020, vol. 22, no. 3, p. 269.
Krinitcyn, M., Pribytkov, G., Korzhova, V., and Firsina, I., Surf. Coat. Technol., 2019, vol. 358, p. 706.
Pribytkov, G.A., Kalita, V.I., Komlev, D.I., et al., Inorg. Mater.: Appl. Res., 2018, vol. 9, no. 3, p. 442.
Fomin, V.M., Golyshev, A.A., Kosarev, V.F., et al., Phys. Mesomech., 2020, vol. 23, no. 4, p. 291.
ACKNOWLEDGMENTS
We are grateful to V.P. Krivopalov for help in the synthesis of powders and scale resistance tests.
Funding
This work was carried out under the governmental contract no. FWRW-2021-0005.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pribytkov, G.A., Krinitsyn, M.G., Korzhova, V.V. et al. Structure and Oxidation Resistance of Titanium Silicide Ti5Si3–Titanium Binder Powder Composites. Prot Met Phys Chem Surf 58, 70–75 (2022). https://doi.org/10.1134/S2070205122010166
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205122010166