Skip to main content
SpringerLink
Log in

The Influence of a Metallic Filler on Relaxation Processes in Polyacrylates

  • NANOSCALE AND NANOSTRUCTURED MATERIALS AND COATINGS
  • Published:
Protection of Metals and Physical Chemistry of Surfaces Aims and scope Submit manuscript

Abstract

The spectra of internal friction in elastic acrylic polymers are investigated by the method of dynamic mechanical relaxation spectroscopy in a wide temperature range in the absence and presence of a finely dispersed iron powder giving consideration to its distribution in the polymer film, which is analyzed using the atomic force and scanning electron microscopy methods. The study of the spectra is based on the analysis of the α, β, and μ relaxation processes occurring in unfilled and filled polymers. The spectra show an increase in the glass transition temperature of the polymer in the presence of a filler and a decrease in inelastic properties in the frequency–temperature dependence. The processing of internal friction spectra at temperatures below 0°C makes it possible to reveal µ processes that correspond to the formation of various forms of ice, destruction of the polymer structure upon freezing, and a decrease in elastic properties, which are most pronounced in systems with a filler. Identification of regions of polymer inelasticity is important for its operation at both the glass transition temperature and temperatures below 0°C.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.

Similar content being viewed by others

REFERENCES

  1. Advances in Composite Materials, Piatti, G., Ed., London: Applied Science Publ., 1978. https://search.rsl.ru/ru/record/01001076545.

    Google Scholar 

  2. Berlin, A.A. and Pakhomova, L.K., Vysokomol. Soedin.,Ser. A, 1990, vol. 32, no. 7, pp. 1154–1157.

    Google Scholar 

  3. Kerber, M.L., Polimernye kompozicionnye materialy: struktura, svoistva, tehnologiya (Polymeric Composites: Structure, Properties, Technology), St. Petersburg: Professiya, 2014.

  4. Yakovlev, A.D., Khimiya i tekhnologiya lakokrasochnykh pokrytii (Chemistry and Technology of Paints Coatings), Leningrad: Khimiya, 1981.

  5. Daniels, E.S., Sudol, E.D., and El-Aasser, M.S., Polymer Latexes: Preparation, Characterization, and Applications, vol. 492 of ACS Symposium Series, New York: Kluwer Academic Publ., 1998.

  6. Aslamazova, T.R., Kotenev, V.A., Lomovskaya, N.Yu., Lomovskoi, V.A., and Tsivadze, A.Yu., Theor. Found. Chem. Eng., 2019, vol. 53, no. 3, pp. 346–254. https://doi.org/10.1134/S0040579519030023

    Article  CAS  Google Scholar 

  7. Aslamazova, T.R., Vysotskii, V.V., Zolotarevskii, V.I., Kotenev, V.A., Lomovskoi, V.A., and Tsivadze, A.Yu., Prot. Met. Phys. Chem. Surf., 2019, vol. 55, no. 6, pp. 1091–1096. https://doi.org/10.1134/S0044185619060020

  8. Aslamazova, T.R., Zolotarevskii, V.I., Kotenev, V.A., and Tsivadze, A.Yu., Meas. Tech., 2019, vol. 62, no. 8, pp. 681–685. https://doi.org/10.1007/s11018-019-01678-y

    Article  CAS  Google Scholar 

  9. Lomovskoy, V.A., Inorg. Mater.: Appl. Res., 1999, vol. 35, no. 9, p. 957.

    Google Scholar 

  10. Lomovskoi, V.A., Materialovedenie, 2004, no. 2, pp. 3–10.

  11. Lomovskoi, V.A., Nauchn. Priborostr., 2019, vol. 29, no. 1, pp. 33–46.

    Article  Google Scholar 

  12. Bartenev, G.M., Struktura i relaksatsionnye svoistva elastomerov (Structure and Relaxation Behavior of Elastomers), Moscow: Khimiya, 1979.

  13. Tager, A.A., Fizikokhimiya polimerov (Physical Chemistry of Polymers), Moscow: Nauchnyi Mir, 2007.

  14. Lomovskoi, V.A., Abaturova, N.A., Lomovskaya, N.Yu., Khlebnikova, O.V., and Galushko, T.V., Materialovedenie, 2010, no. 1, pp. 29–34.

  15. Lomovskoi, V.A., J. Mech. Solids, 2011, vol. 46, no. 2, pp. 299–310. https://doi.org/. Valishin, A.A., Gorshkov, A.A., and Lomovskoy, V.A., Mech. Solids (Engl. Transl.), 2011, vol. 46, no. 2, pp. 299–310. https://doi.org/10.3103/S002565441102019110.3103/S00256544110201

  16. Aslamazova, T.R., Zolotarevskii, V.I., Kotenev, V.A., Lomovskaya, N.Yu., Lomovskoi, V.A., and Tsivad-ze, A.Yu., Prot. Met. Phys. Chem. Surf., 2018, vol. 54, no. 6, pp. 1081–1086. https://doi.org/10.1134/S2070205118060059

  17. Aslamazova, T.R., Kotenev, V.A., Lomovskaya, N.Yu., Lomovskoi, V.A., and Tsivadze, A.Yu., Prot. Met. Phys. Chem. Surf., 2016, vol. 52, no. 6, pp. 621–627. https://doi.org/10.7868/s0044185616060073

    Article  Google Scholar 

  18. Aslamazova, T.R., Kotenev, V.A., Lomovskaya, N.Yu., Lomovskoi, V.A., and Tsivadze, A.Yu., Prot. Met. Phys. Chem. Surf., 2014, vol. 50, no. 5, pp. 620–627. https://doi.org/10.7868/s0044185614050040

    Article  CAS  Google Scholar 

  19. Aslamazova, T.R., Averin, A.A., Zolotarevskii, V.I., Lomovskaya, N.Yu., Lomovskoi, V.A., Kotenev, V.A., and Tsivadze, A.Yu., Prot. Met. Phys. Chem. Surf., 2017, vol. 53, no. 3, pp. 437–443. https://doi.org/10.1134/S2070205117030042

    Article  CAS  Google Scholar 

  20. Lomovskoi, V.A., Materialovedenie, 2007, no. 2, pp. 3–10.

  21. Lomovskoy, V.A., Bondarev, M.M., Buivis, S.B., and Shatalov, V.G., RF Patent 1387634, 1987.

  22. Lomovskoy, V.A., Bondarev, M.M., Buivis, S.B., and Shatalov, V.G., RF Patent 2568963, 2015.

  23. Lomovskoi, V.A., Materialovedenie, 2007, no. 3, pp. 3–12.

  24. Lomovskoi, V.A., Materialovedenie, 2007, no. 4, pp. 3–11.

  25. Konstantinov, N.U., Lomovskaya, N.Yu., Abaturova, N.A., Sakov, D.M., and Lomovskoy, V.A., Inorg. Mater.: Appl. Res., 2017, vol. 2, pp. 15–20.

    Google Scholar 

  26. Warren, S.G., Appl. Opt., 1984, vol. 23, no. 8, pp. 1206–1211. https://doi.org/10.1364/AO.23.001206

    Article  CAS  Google Scholar 

  27. Murray, B.J. and Bertram, A.K., Phys. Chem. Chem. Phys., 2006, vol. 110, pp. 136–145.

    Article  Google Scholar 

  28. Gillan, M.J., Alfè, D., Bartók, A.P., and Csányi, G., J. Chem. Phys., 2013, vol. 139, no. 24, pp. 244–252. https://doi.org/10.1063/1.4852182

    Article  CAS  Google Scholar 

  29. Aslamazova, T.R., Lomovskoi, V.A., Kotenev, V.A., and Tsivadze, A.Yu., Prot. Met. Phys. Chem. Surf., 2019, vol. 55, no. 3, pp. 487–490. https://doi.org/10.1134/S0044185619030057

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, 119071, Moscow, Russia

    T. R. Aslamazova, V. A. Kotenev, V. A. Lomovskoi & A. Yu. Tsivadze

Authors
  1. T. R. Aslamazova
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. V. A. Kotenev
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. V. A. Lomovskoi
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. A. Yu. Tsivadze
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to T. R. Aslamazova.

Additional information

Translated by O. Kadkin

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Aslamazova, T.R., Kotenev, V.A., Lomovskoi, V.A. et al. The Influence of a Metallic Filler on Relaxation Processes in Polyacrylates. Prot Met Phys Chem Surf 56, 929–937 (2020). https://doi.org/10.1134/S2070205120050068

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S2070205120050068

Search

Navigation