Abstract
The implants used as cardio stents, orthopedic and dental implant may be subjected to biological corrosion. Uncoated implants can be corroded in various parts of the body due to acidic erosion and oxidation. This paper presents the findings of a coating technique for the deposition of hydroxyapatite (HAP) coatings on Ti, Ti6Al4V and AISI 316L stainless steel substrates (316L SS). HAP synthesized using the sol–gel technique have been successfully produced. The corrosion behaviors of uncoated and HAP coated substrates were investigated in Ringer’s and 0.9% NaCl solutions. The HAP coatings obtained by the sol gel method are effective in preventing corrosion and increased the polarization resistance values compared to the uncoated samples. Surface structures and chemical composition of the coatings were investigated by scanning electron microscopy (SEM) and energy diffraction X-ray (EDX) methods. SEM images of HAP coated substrates show cauliflower-like structures on the surface. Furthermore, the HAP coatings formed do not completely cover the surface. EDX analysis of HAP coated substrats were determined that there were Ca, O and P as well as oxides on the surface. The obtained HAP powder was characterized by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) methods. In XRD analysis, it was analysed that HAP powder consisted of CaP and HAP structures. In addition, FTIR spectrum was determined that characteristic HAP absorption bands.
Similar content being viewed by others
REFERENCES
Heiman, R.B., Surf. Coat. Technol., 2013, vol. 233, p. 27.
Anjaneyulu, U., Priyadarshini, B., Arul Xavier Stango, S., Chellappa, M., Geetha, M., and Vijayalakshmi, U., Mater. Technol.: Adv. Perform. Mater., 2017, vol. 32, p. 800.
Asri, R.I.M., Harun, W.S.W., Hassan, M.A., Ghani, S.A.C., and Buyong, Z., J. Mech. Behav. Biomed. Mater., 2016, vol. 57, p. 95.
Asri, R.I.M., Harun, W.S.W., Samykano, M., Lah, N.A.C., Ghani, S.A.C., Tarlochan, F., and Raza, M.R., Mater. Sci. Eng., C, 2017, vol. 77, p. 1261.
Owens, J., Singh, R.K., Foroutan, F., Alqaysi, M., Han, C.M., Mahapatra, C., Kim, H.W., and Knowles, J.C., Prog. Mater. Sci., 2016, vol. 77, p. 1.
Chatzistavrou, X., Kontonasaki, E., Paraskevopoulos, K.M., Koidis, P., and Boccaccini, A.R., in Non-Metallic Biomaterials for Tooth Repair and Replacement, Vallittu, P., Ed., Woodhead Publ., 2013, pp. 194–231.
Pilliar, R.M., in Surface Coating and Modification of Metallic Biomaterials, Woodhead Publ., 2015, p. 185.
Büyüksagis, A., Ciftci, N., Ergun, Y., and Kayali, Y., Prot. Met. Phys. Chem. Surf., 2011, vol. 47, no. 5, pp. 670–679.
Yang, Y., Zhang, B., Lu, J., Chen, J., Zhang, X., and Gu, Z., Appl. Surf. Sci., 2010, vol. 256, p. 2700.
Blackwood, D.J. and Seah, K.W.H., Mater. Sci. Eng., C, 2009, vol. 29, p. 1233.
Eliaz, N., Shmueli, S., Shur, I., Benayahu, D., Aronov, D., and Rosenman, G., Acta Biomater., 2009, vol. 5, p. 3178.
Lakstein, D., Kopelovitch, W., Barkay, Z., Bahaa, M., Hendel, D., and Eliaz, N., Acta Biomater., 2009, vol. 5, p. 2258.
Bauer, S., Schmuki, P., Von Der Mark, K., and Park, J., Prog. Mater. Sci., 2013, vol. 58, p. 261.
Hieda, J., Sakaguchi, A., Nakano, M., Akasaka, H., and Ohtake, N., Appl. Surf. Sci., 2019, vol. 465, p. 509.
Ummethala, R., Despang, F., Gelinsky, M., and Basu, B., Electrochim. Acta, 2011, vol. 56, p. 3809.
Liu, F., Xu, J., Wang, F., Zhao, L., and Shimizu, T., Surf. Coat. Technol., 2010, vol. 204, p. 3294.
Zhou, Y.L., Niinomi, M., Akahori, T., Fukui, H., and Toda, H., Mater. Sci. Eng., A, 2005, vol. 398, p. 28.
Sul, Y.T., Johansson, C.B., Petronis, S., Krozer, A., Jeong, Y., Wennerberg, A., and Albrektsson, T., Biomaterials, 2002, vol. 23, p. 491.
Zhou, W., Shen, T., and Aung, N.N., Corros. Sci., 2010, vol. 52, p. 1035.
Cheng, H.N. and Gross, R.A., in Polymer Biocatalysis and Biomaterials II, vol. 999 of ACS Symposium Series, Washington, DC: American Chemical Society, 2008, p. 1.
Kannan, S., Balamurugan, A., and Rajeswari, S., Electrochim. Acta, 2004, vol. 49, p. 2395.
Balamurugan, A., Balossier, G., Kannan, S., Michel, J., Faure, J., and Rajeswari, S., Ceram. Int., 2007, vol. 33, p. 605.
Zhang, S., Xianting, Z., Yongsheng, W., Kui, C., and Wenjian, W., Surf. Coat. Technol., 2006, vol. 200, p. 6350.
Gan, L. and Pilliar, R., Biomaterials, 2004, vol. 25, p. 5303.
Usinskas, P., Stankeviciute, Z., Beganskiene, A., and Kareiva, A., Surf. Coat. Technol., 2016, vol. 307, p. 935.
Vladescu, A., Braic, M., Ak Azem, F., Titorencu, I., Braic, V., Pruna, V., Kiss, A., Parau, A., and Birlik, I., Appl. Surf. Sci., 2015, vol. 354, p. 373.
Sridhar, T.M., Kamachi, U., and Subbaiyan, M., Corros. Sci., 2003, vol. 45, p. 2337.
Funding
The authors acknowledge the financial support of TUBITAK (project no. 107M563).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Büyüksağiş, A., Çiftçi, N. HAP Coatings for Biomedical Applications: Biocompatibility and Surface Protection Against Corrosion of Ti, Ti6Al4V and AISI 316L SS. Prot Met Phys Chem Surf 56, 834–843 (2020). https://doi.org/10.1134/S2070205120040085
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205120040085