Skip to main content
SpringerLink
Log in

Modification of silane based coating with bisphenol A, isosorbide and resorcinol for anticorrosive application

  • Nanoscale and Nanostructured Materials and Coatings
  • Published:
Protection of Metals and Physical Chemistry of Surfaces Aims and scope Submit manuscript

Abstract

(3-glycidoxypropyl) trimethoxysilane (GPTMS) and tetraethyl orthosilicate (TEOS) based coating has been prepared by sol-gel method which has oxirane ring as functionality present in the structure. Since the GPTMS has free oxirane ring hence to modify the sol through this oxirane ring,–OH functional precursor has been added into it. The performance of bisphenol A, isosorbide and resorcinol solely and in combination as bisphenol-isosorbide, bisphenol A-resorcinol and Isosorbide-resorcinol has been compared for such modification. It is observed that in anticorrosive properties, bisphenol A has given the best result. The comparative result has been observed with bisphenol-resorcinol combination. The result has been proven by salt spray and EIS study. In EIS study it is observed that Bisphenol A based coating and Bisphenol AResorcinol combination has shown the impedance value >10 Gohms. In mechanical properties, the hardness of bisphenol A and resorcinol based system observed to be higher. This is due to the aromatic linkage has been introduce in the system which tends to improve the hardness performance of the system.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Shchukin, D.G., Lamaka, S.V., Yasakau, K.A., et al, Phys. Chem. C, 2008, vol. 112, p. 958.

    Article  Google Scholar 

  2. Chico, B., Simancas, J., Vega, J.M., et al, Prog. Org. Coat., 2008, vol. 61, p. 283.

    Article  Google Scholar 

  3. Wang, H. and Akid, R, Corros. Sci., 2007, vol. 49, p. 4491.

    Article  Google Scholar 

  4. Supplit, R. and Koch, T, Corros. Sci., 2007, vol. 49, p. 3015.

    Article  Google Scholar 

  5. Wang, H. and Akid, R, Corros. Sci., 2008, vol. 50, p. 1142.

    Article  Google Scholar 

  6. Zheludkevich, M.L, J. Mater. Chem., 2005, vol. 15, p. 5099.

    Article  Google Scholar 

  7. More, A. and Mhaske, S, Arabian J. Sci. Eng., 2016, vol. 41, p. 2239.

    Article  Google Scholar 

  8. Zand, R.Z., Verbeken, K., and Adriaens, A, Int. J. Electrochem. Sci., 2013, vol. 8, p. 548.

    Google Scholar 

  9. Choy, I. and Plazek, D.J, J. Polym. Sci, Part B: Polym. Phys., 1986, vol. 24, no. 6, p. 1303.

    Article  Google Scholar 

  10. Rochester, J, Reprod. Toxicol., 2013, vol. 42, p. 132.

    Article  Google Scholar 

  11. Łukaszczyka, J, Janickia, B., and Kaczmarekb, M., Eur. Polym. J., 2011, vol. 47, p. 1601.

    Article  Google Scholar 

  12. Sorokin, V.P., Bobylev, V.A., and Eselev, A.D, Polym. Sci., Ser. C, 2007, vol. 49, p. 272.

    Article  Google Scholar 

  13. Fei, B., Chen, C., Peng, S., et al, Polym. Int., 2004, vol. 53, p. 2092.

    Article  Google Scholar 

  14. Reddy, D.J.P., Rajulu, A.V., Arumugam, V., et al, J. Plast. Film Sheeting, 2009, vol. 25, p. 221.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Polymer and Surface Engineering, Institute Of Chemical Technology, Mumbai, Maharashtra, India

    Aarti P. More & S. T. Mhaske

Authors
  1. Aarti P. More
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. T. Mhaske
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. T. Mhaske.

Additional information

The article is published in the original.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

More, A.P., Mhaske, S.T. Modification of silane based coating with bisphenol A, isosorbide and resorcinol for anticorrosive application. Prot Met Phys Chem Surf 53, 864–872 (2017). https://doi.org/10.1134/S2070205117050148

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S2070205117050148

Keywords

Search

Navigation