Abstract
In this study, the effect of arc current on the corrosion behaviour of NiTi coating on stainless steel has been investigated. NiTi powder mixture was alloyed on surface austenitic AISI304 by using plasma transferred arc (PTA) method. Surface alloying process is turned out using 80, 90, 100 A current densities and Ar atmosphere which is plasma and protective. The corrosion resistance of the coatings was analyzed by measuring the potentiodynamic polarization scanning (PDS) technique. Results indicate that corrosion resistances of the coatings decrease with increasing the arc current. In addition, the localized corrosion on the surface of produced coating at 100A is more activated than other coatings and the most passive coating in view of corrosion was obtained at produced coating at 80A.
Similar content being viewed by others
References
Ozel, S., Kurt, B., and Somunkiran, I., Surface and Coatings Technology, 2008, vol. 202, p. 3633.
Bourithis, E. and Tazedakis, A., J. Mater. Process. Tech., 2002, vol. 128, p. 169.
Deuis, R.L., Yellupb, J.M., and Subramanian, C., Compos. Sci. Technol., 1998, vol. 58, p. 299.
Yan, M., Surface and Coatings Technology, 1998, vol. 99, pP. 132.
Majumdar, J.D. and Manna, I., Mater. Sci. Engineerin A, 1999, vol. 267, p. 50.
Borges, C.F.M., Hennecke, S., and Pfender, E., Surface and Coatings Technology, 2000, vol. 123, p. 112.
Ju, X. and Dong, H., Surface and Coatings Technology, 2006, vol. 201, p. 1542.
Cheng, F.T., Lo, K.H., and Man, H.C., Surface and Coatings Technology, 2003, vol. 172, p. 316.
Wirth, C., Grosgogeat, B., Lagneau, C. et al., Mater. Sci. Engineerin C, 2008, vol. 28, p. 990.
Chiu, K.Y., Cheng, F.T., and Man, H.C., Surface and Coatings Technology, 2006, vol. 200, p. 6054.
Chiu, K.Y., Cheng, F.T., and Man, H.C., Mater. Sci. Engineerin A, 2005, vol. 392, p. 348.
Cheng, F.T., Lo, K.H., and Man, H.C., Surface and Coatings Technology, 2003, vol. 172, p. 308.
Zhang, T.C. and Li, D.Y., Mater. Sci. Engineerin A, 2002, vol. 329–331, p. 563.
Sui, J.H., Gao, Z.Y., Cai, W., and Zhang, Z.G., Mater. Sci. Engineerin A, 2007, vol. 452–453, p. 518.
Cheng, F.T., Shi, P., and Man, H.C., Mater. Sci. Engineerin. Sci. Eng. A, 2003, vol. 339, p. 312.
Cissé, O., Savadogo, O., Wu, M., and Yahia, L.H., J. Biomed. Mater. Res., 2002, vol. 61(3), p. 339.
Rondelli, G. and Vicentini, B., J. Biomed. Mater. Res., 2000, vol. 51(1), p. 47.
Villermaux F., Tabrizian M., Yahia L’H. et al. // Appl. Surf. Sci. 1997. V. 109–110. P. 62.
Shabalovskaya S.A. // Biomed. Mater. Eng. 2002. V. 12(1). P. 69.
Celik E., Ozdemir I., Avci E., Tsunekawa Y. //Surface and Coatings Technology. 2005. V. 193. P. 297.
Kim W.J., Kim J.G., Kim Y.S et al. // Met. Mater. Int. 2007. V. 13. P. 317.
Dikici B., Tekmen C., Gavgali M. et al. // Int. Thermal Spray Conf. Exposition. Maastricht, Netherdlands. 2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Dikici, B., Ozel, S., Gavgali, M. et al. The effect of arc current on the corrosion behaviour of coated NiTi alloy on AISI304 by plasma transferred arc process. Prot Met Phys Chem Surf 48, 563–567 (2012). https://doi.org/10.1134/S2070205112050024
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205112050024