Abstract
A thermoprotective coating was created based on polyetherurethane rubber with epoxyurethane end groups cured with a mixture of aromatic amines, epoxy chlorine-containing oligomers, resorcinol, and melamine polyphosphate filler. The rheokinetics of coating curing was studied, and its mechanical, thermal and sorption properties were determined.
Similar content being viewed by others
REFERENCES
O. I. Sidorov, V. A. Pil’chenko, N. I. Sidorova, T. V. Bochkova, and M. I. Buzin, “A study of curing regularities and properties of an adhesion-active epoxy urethane heat-protective coating,” Polym. Sci., Ser. D 15, 322–329 (2022).
O. I. Sidorov, Yu. M. Milekhin, V. M. Merkulov, N. I. Sidorova, and A. A. Zhurba, “The rheokinetic laws governing the curing of a compound based on a chlorine-containing,” Int. Pol. Sci. Technol. 39, 21–26 (2012).
O. I. Sidorov, S. A. Kapustin, D. I. Shragin, A. M. Muzafarov, N. I. Sidorova, and D. V. Pleshakov, “The influence of an organosilicon modifier on the properties of compound based on epoxy-urethane oligomer,” Polym. Sci., Ser. D 10, 322–325 (2017).
A. V. Pavlovich, V. V. Vladenkov, V. N. Izyumskii, and S. L. Kil’chinskaya, “Fire retardant intumescent coatings for metal,” Lakokras. Prom-st, No. 11, 18–25 (2012).
Kh.-D. Negerl, T. Futterer, V. Mans-Fibla, et al., RF Patent No. 238055 (2010).
O. I. Sidorov, S. A. Kapustin, A. A. Zhurba, N. I. Sidorova, and V. I. Elizarov, “A thermal protective compound elastic at negative temperatures,” Polym. Sci., Ser. D 11, 393–396 (2018).
M. L. Kerber, A. M. Bukanov, S. I. Wolfson, I. Yu. Gorbunova, L. B. Kandyrin, A. G. Sirota, and M. A. Sheryshev, Physical and Chemical Processes in Polymer Processing (Nauch. Osnovy Tekhnol., St. Petersburg, 2013) [in Russian].
A. Ya. Malkin and S. G. Kulichikhin, Rheology in the Processes of Formation and Transformation of Polymers (Khimiya, Moscow, 1985) [in Russian].
V. P. Zakordonsky and R. V. Skladnyuk, “On the role of physical structuring in the processes of formation of a filled epoxy polymer,” Vysokomol. Soed., Ser. A 43, 1173–1181 (2001).
ACKNOWLEDGMENTS
The authors express their gratitude to A.A. Rogozina for providing technical assistance during the work.
Funding
Part of the research using the DSC method was carried out at the Center for Microbiology and Mathematics of the Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, with the financial support of the Ministry of Education and Science of the Russian Federation.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by K. Gumerov
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sidorov, O.I., Pilchenko, V.A., Bochkova, T.V. et al. A Melamine Polyphosphate-Filled Thermoprotective Coating Based on Polyetherurethane Rubber and Chlorinated Epoxy Oligomers. Polym. Sci. Ser. D 16, 1008–1016 (2023). https://doi.org/10.1134/S1995421223040329
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421223040329