Abstract
This study presents experimental results showing that blocked polyisocyanate (4,4′-diphenylmethane diisocyanate monomer) as an adhesion promoter for polyester cord can be obtained under plant conditions with subsequent application of a commercial product in rubber–cord systems with one-stage latex impregnation.
REFERENCES
A. F. Puchkov, “BKPITs-DBS–time-tested modifier,” in Proceedings of the 24th Scientific-Practical Conference “Rubber Industry. Raw Materials. Materials. Technologies” (Moscow, 2021), pp. 90–91.
A. L. Smith, Applied Infrared Spectroscopy Fundamentals, Techniques and Analytical Problem-Solving (Wiley-Interscience, New York, 1979; Mir, Moscow, 1982).
A. F. Puchkov, M. P. Spiridonova, V. F. Kablov, and O. V. Kozlova, “Optimization of blocked polyisocyanate preparation modes BKPITs-DBSP,” Kauchuk i Rezina, No. 1, 25–28 (2012).
S. V. Turenko, Candidate’s Dissertation in Engineering (2002).
A. V. Molchanov, Candidate’s Dissertation in Chemistry (Voronezh, 2000).
R. M. Silverstein, Spectrometric Identification of Organic Compounds (Wiley, 2014; Mir, Moscow, 1977).
K. N. Aleksandrov, K. N. Fredgein, et al., Polyurethanes in the Production of Artificial Materials for Clothing and Footwear (Legkaya Industriya, Moscow, 1977) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by N. Saetova
Rights and permissions
About this article
Cite this article
Puchkov, A.F., Spiridonova, M.P., Tret’yakova, N.A. et al. Blocked Polyisocyanate as an Adhesion Promoter for Polyester Cord. Polym. Sci. Ser. D 16, 353–358 (2023). https://doi.org/10.1134/S1995421223020351
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421223020351