Abstract
New halogen-containing oligoethers based on 1,1-hydroxy-2,2-di(4-hydroxyphenyl)ethylene and 1,1-dichloro-2,2-di(4-hydroxyphenyl)ethylene of various degrees of condensation were synthesized via high-temperature polycondensation. Polymer composites with different amount of synthesized oligoesters were prepared based on 4,4’-dioxydiphenylpropane and 4,4’-chlorodiphenylsulfone. Modern methods showed that the new composites are superior to industrial polysulfone in their main physicochemical and operational properties.
Similar content being viewed by others
REFERENCES
L. A. Zenitova and E. M. Shteinberg, “Polysulfone as a functional polymeric material and its production,” Mezhdunarod. Nauchno-Issled. Zh., No. 6 23—28 (2012).
A. B. Baranov, O. E. Peksimov, T. N. Prudskova, et al., “Study of production characteristics of polysulfone-based materyals,” Tonkie Khimich. Tekhnol. 11, 87–90 (2016).
O. E. Peksimov, V. A. Balabanova, I. L. Dinzburg, et al., “Heat-resistant construction materials: polysulfones grades PSF-190 and UDEL P-1700. Thermal, physical, dielectric, and physicomechamical properties in a wide range of temperatures and testing rates,” Plast. Massy, No. 11, 20–21 (2013).
E. M. Shteinberg, E. A. Sergeeva, L. A. Zenitova, et al., “Application and production of polysulfone: a review,” Vest. Kazan. Tekhnolog. Univ. 15, 168–171 (2012).
I. P. Storozhuk, V. M. Alekseev, A. N. Kalinnikov, et al., “Chemically modified polysulfones and their properties,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 6, 24–33 (2021).
A. A. Zhansitov, Zh. I. Kurdanova, K. T. Shakhmurzova, et al., “Synthesis of Polyetherketones, Polyethersulfones, and Copolymers on their Basis for Application in Additive Technologies,” in Polymers in the Strategy of Scientific and Technological Development of the RF (Polimery, 2020).
T. R. Deberdeev, A. I. Akhmetshina, L. K. Karimova, et al., “Aromatic polysulfones: synthesis strategies, properties, and application,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 12, 2–14 (2019).
A. V. Khvatov, P. N. Brevnov, N. G. Shilkina, et al., “Thermal and physicomechanical properties of composite materials on the basis of polysulfone with multi-wall carbon nanotubes,” Khim. Fiz. 38, 71–76 (2019).
R. R. Nizamiev and O. L. Khamidullin, “Experince in application of poilysulfone for production of composite materials,” Aerokosmich. Tekhnika, Vysokie Tekhnologii i Innovatsii 1, 135–138 (2020).
A. P. Petrova, N. F. Lukina, K. L. Besednov, et al., “Effect of the polysulfone structure on the properties of epoxy glue-based binders for polymeric compositions materials,” Vse Materialy. Entsiklopedich. Spravochnik, No. 7, 9–16 (2019).
A. B. Baranov, T. I. Andreeva, I. D. Simonov-Emel’yanov, et al., “Structure, composition, and production of cast composite materials based on glass-filled polysulfone,” Tonkie Khimich. Tekhnologii 14, 39–44 (2019).
A. B. Baranov and I. D. Simonov-Emelyanov, “Effect of the generalized parameters of the dispersion structure on the rheological properties of glass-filled polysulfone,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 3, 10–15 (2020).
G. K. Shambilova, E. A. Pavlyuchkova, V. A. Govorov, et al., “Rheology of polysulfone and its solutions,” Polymer Sci., Ser. A 61 208—214 (2019).
A. M. Kharaev, R. Ch. Bazheva, and M. M. Parchieva, et al. “Aromatic polyethersulfones with enhanced physicomechanical properties,” Vse Materialy. Entsiklopedich. Spravochnik, No. 11, 44–48 (2020).
Zh. I. Kurdanova, K. T. Shakhmurzova, A. A. Zhansitov, et al., “Synthesis and properties of aromatic polyethers with carding fragments,” Izv. VUZ. Khimiya i Khimich. Tekhnol. 60, 28–39 (2017).
D. Cemil, AtillaT. Mehmet, and Y. Yusuf, “Recent advances in the preparation of functionalized polysulfones,” Polymer Int. 1–17 (2013).
M. S. Haider, G. N. Shao, and S. M. Imran, “Aminated polyethersulfone-silver nanoparticles (AgNPs-APES) composite membranes with controlled silver ion release for antibacterial and water treatment applications,” Mater. Sci. Eng. 62 732—745 (2016).
A. M. Kharaev, R. C. Bazheva, M. B. Begieva, et al.,“ Polyethersulfones with improved thermophysical properties,” Polymer Sci., Ser. D 12, 24–28 (2019).
A. S. Borodulin, A. N. Kalinnikov, R. C. Bazheva, et al.,“ Synthesis and properties of aromatic polyethersulfones,” Int. J. Mech. Eng. Technol. 9, 1109–1116 (2018).
Z. Kh. Sultygova, Z. I. Inarkieva, R. Ch. Bazheva, et al., “High performance aromatic polyethersulfones,” Key Eng. Mater. 869, 21–27 (2020).
E. B. Barokova, R. Ch. Bazheva, A. M. Haraev, et al., “Oligosulphones on the basis of 1,1-Dichlor-2,2-di(4-oxyphenyl)-ethylene and 4,4'-dichlordiphenyl-sulphone obtained by high-temperature polycondensation,” J. Tribological Assoc. 16, 284–287 (2010).
Funding
This work was financially supported by the Russian Foundation for Basic Research, project no. 18-29-18063).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by A. Tulyabaew
Rights and permissions
About this article
Cite this article
Kharaev, A.M., Bazheva, R.C., Beslaneeva, Z.L. et al. The Influence of Various Oligoether Additives on the Formation of Physical and Mechanical Properties of Polysulfone. Polym. Sci. Ser. D 15, 484–487 (2022). https://doi.org/10.1134/S1995421222030121
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421222030121