Abstract
The properties of a VK-51 high-strength epoxy film adhesive containing different reinforcing fabric fillers are given. The effect of reinforcing fillers—fabrics based on a mixture of lavsan and viscose fibers (90 : 10%) and BNK-40 latex or based on 100% lavsan fiber (VK-51A adhesive), a T-10-80 fiberglass (VK-51 AS adhesive), and an A3(S)-type fiberglass mesh (VK-51MA adhesive)—on the properties of the adhesive and adhesive joints on its basis is shown.
Similar content being viewed by others
REFERENCES
L. A. Dement’eva, L. I. Bocharova, N. F. Lukina, and A. P. Petrova, “High-strength film adhesives VK-51 and VK-51A,” Klei. Germetiki, Tekhnol., No. 4, 17–19 (2015).
Aviation Materials: Handbook, Vol. 10: Adhesives, Sealants, Rubbers, and Hydraulic Fluids, Part 1: Adhesives and Adhesive Prepregs, Ed. by E. N. Kablov, 7th ed. (All-Russian Scientific Research Institute of Aviation Materials, Moscow, 2019) [in Russian].
A. P. Petrova, N. F. Lukina, E. V. Rubtsova, and A. Yu. Isaev, “Influence of reinforcement of epoxy film adhesive VK-51 with non-woven fibrous material on its properties,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 9, 5 (2019). https://doi.org/10.18577/2307-6046-2018-0-9-47-56
E. N. Kablov, “Innovative developments of the All-Russian Scientific Research Institute of Aviation Materials within the project “Strategic development of materials and technologies of their recycling until 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33
E. N. Kablov, “Russia in the market of intellectual resources,” Ekspert, No. 28 (951), 48–51 (2015).
E. N. Kablov, “Advanced materials: creation and recycling as a basis for innovations,” Kryl’ya Rodiny, No. 5, 8–18 (2016).
E. N. Kablov, “Aerospace materials science,” Vse Mater., No. 3, 2–14 (2008).
Gluing in Machine Enineering: Handbook, Ed. by G. V. Malysheva (Nauka i Tekhnologiya, Moscow, 2005), Vol. 1, pp. 435–445.
M. Ya. Gofin and A. A. Ivanov, Mechanics of Honeycomb Constructions: Handbook, Vol. 1: Design and Development of Honeycomb Constructions. Experimental Studies (Mir, Moscow, 2010) [in Russian].
A. P. Petrova and A.A. Donskoii, Adhesive Materials. Sealants (Professional, St. Petersburg, 2008) [in Russian].
A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders and Adhesive Prepregs: Manual, Ed. by E. N. Kablov (All-Russian Scientific Research Institute of Aviation Materials, Moscow, 2017) [in Russian].
V. T. Minakov, V. I. Postnov, N. I. Shvets, O. B. Zastrogina, V. I. Petukhov, and K. V. Makrushin, “Specific manufacture of three-layer honeycomb panels with hot curing polymer filler,” Aviats. Mater. Tekhnol., No. 3, 6–9 (2009).
A. B. Laptev, S. L. Barbot’ko, and E. V. Nikolaev, “The persistence of material properties under the influence of climatic and operational factors,” Aviats. Mater. Tekhnol., Suppl., 547–561 (2017). https://doi.org/10.18577/2071-9140-2017-0-S-547-561
I. A. Sharova, “National and foreign experience in the development of cold curing epoxy adhesives,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 7, 5 (2014). https://doi.org/10.18577/2307-6046-2014-0-7-5-5
Funding
This work was performed as a part of Comprehensive Scientific Problem 15.1. “Multifunctional Adhesive Systems” (Strategic Trends in Materials and Their Treatment Processes for the Period up to 2030) [4–7].
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by K. Utegenov
Rights and permissions
About this article
Cite this article
Petrova, A.P., Lukina, N.F. & Isaev, A.Y. The Effect of Reinforcing Fillers of Different Types on Properties of VK-51 Adhesive. Polym. Sci. Ser. D 15, 199–204 (2022). https://doi.org/10.1134/S1995421222020204
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421222020204